A villa bathroom lives or dies on storage. Robe hanging space is easy to plan, but the folded towels, linens, toiletries, spare toilet paper and grooming kit that a family or a guest suite actually generates all need drawers. When we brief clients on Santerson Drawer Units, the question is almost never "do you make them" — it is "how do I specify one that still works after three years of daily use, in a room with no standard dimensions?" This guide walks through the decisions in the order they arrive on a villa project, from measuring the wall to matching the drawer unit to the vanity and cabinetry already on the drawing.
Why Drawer Units Deserve Their Own Line on the Villa Schedule
On most villa fit-outs, bathroom storage gets specified late, as an accessory line under "joinery", and then value-engineered out when the budget tightens. That is a mistake. A drawer unit is the only bathroom element that holds everything a resident touches twice a day, and it sits in the wettest, most temperature-variable part of the building. Off-the-shelf units from a local retailer are built to fixed cabinet widths — 400 mm, 600 mm, 800 mm — and villa bathrooms rarely cooperate with those numbers. A niche between two walls, a return under a sloped ceiling, an alcove beside a freestanding tub: each one ends up with a filler panel, a silicone joint and a visibly "added on" look.
Santerson Drawer Units sit in our Storage Units collection for residential bathroom projects, where the finish, layout and dimensions are specified per project rather than picked from a fixed size grid. Configuration is made-to-measure, with material and finish options chosen per space. That single difference changes how the rest of the room comes together: the unit can be built to the exact clear opening, carried to the same reveal as the vanity beside it, and finished in the same surface as the bedroom wardrobe across the corridor.
Step 1 — Fix the Dimensions Before You Fix the Finish
Work from the finished-face dimensions on the drawing, not the structural wall. Tile thickness, waterproofing build-up and any plasterboard packing will eat 20–40 mm across a niche, and that is exactly the tolerance that decides whether a unit sits flush or needs a scribe.
- Clear opening, width and height — measure to the finished face at three points along each run. Older villa structures and renovated shells are rarely square, and a 15 mm variance across a 900 mm alcove is common.
- Depth available — confirm the case depth against the pipework, waste and any concealed cistern frame behind the wall. A unit specified to the wall line will not clear a trap that projects.
- Floor finish build-up — heated screed plus stone or tile changes the floor level after the joinery is drawn. State whether the drawer unit height includes legs, plinth or a floor recess.
- Door and drawer swing — check the drawer front against the WC door arc, the shower screen and any wall-hung basin in front of it. A 400 mm deep drawer that cannot open because the door hits it is a snag nobody wants to raise on site.
- Skirting and reveals — decide whether the unit runs through the skirting or stops short of it, and match that decision to the vanity and any Santerson Freestanding Cabinets in the same room.
Send us the finished-face dimensions with your drawing rather than a site sketch. Made-to-measure sizing only pays off when the numbers it is built to are the numbers the tiler will work to.
Step 2 — Choose the Drawer Layout Around What Actually Gets Stored
Depth and count should follow the household, not the catalogue. Three layouts cover most villa bathrooms:
| Layout | Where it belongs in a villa | What it solves |
|---|---|---|
| Shallow stacked drawers (4–6) | Guest powder room, main bathroom beside the vanity | Toiletries, grooming kit, spare towels folded flat. Everything visible at a glance, nothing buried. |
| Mixed shallow and deep drawers | Family bathroom, principal ensuite | Bath towels and hand towels in the deep runs, daily items up top. Keeps heavy linen out of the awkward bottom position. |
| Tall narrow unit beside a wall-hung WC or basin | Ensuite, cloakroom, tight alcoves | Uses a 300–400 mm sliver of wall that would otherwise be packed away. Pairs with Santerson Corner Storage where the alcove is at a return. |
If the villa has bedrooms without built-in robe storage, or a family wing where linen has nowhere to go, take the drawer logic further into the plan. Drawer Focused Modular Wardrobes carry the same made-to-measure approach into the bedrooms, so the drawer fronts, handles and finishes repeat through the house instead of being reinvented room by room. For a whole-villa package, that consistency is where the visual quality shows up most clearly.
Step 3 — Match the Finish to the Rest of the Envelope
The drawer unit should read as part of the architecture, which means its surface has to reconcile with three things already chosen: the vanity front, the wall panelling or tile, and the ironmongery. Two practical rules:
- Pull the finish from the joinery schedule, not a sample card. Where the villa uses veneer, lacquer, acrylic or melamine fronts elsewhere, specify the drawer unit in the same material family and the same grain direction. We manufacture to bespoke finishes as part of our custom and OEM work, so matching an existing specified surface is a normal request rather than a special order.
- Test the finish where it will live. A bathroom front sees condensation, direct splash and cleaning agents. Ask for the material and finish options listed on the product page and confirm the intended use with us before signing off, especially for high-gloss surfaces near a basin or shower screen.
Coordinate the drawer unit at the same time as the vanity so the two share a datum line. Our Santerson Floating Vanity is specified the same way — made-to-measure sizing, material and finish options, project-tailored layout — which makes it straightforward to align a floating vanity with a drawer unit below or beside it, keep both off the floor, and let the floor finish run through underneath.
Step 4 — Specify Hardware and Interior Details as Part of the Drawing
Hardware is where a made-to-measure unit either feels built-in or feels bought. Settle these on paper, in the specification, before production:
- Runner type and load rating for the deep runs, and soft-close on every drawer that faces a traffic route.
- Handle or handleless front — if the kitchen elsewhere in the villa is handleless, carry that through rather than introducing a new pull profile.
- Drawer interior: dividers for grooming items, mats for linen runs, and whether any top drawer is lockable for a guest suite or a rental villa.
- Wall fixing method and the substrate it fixes to, agreed with the builder before the wall is closed up.
- Basin and countertop interface: if the unit abuts or supports a counter, confirm the basin and countertop fit for the exact configuration selected.
These details cost almost nothing to add at specification stage and are expensive to change after the unit is cut. On multi-bathroom villa projects we list them per room in the schedule, so each unit is produced to its own configuration instead of being defaulted.
Step 5 — Order It With the Rest of the Bathroom Package
The commercial argument for specifying drawer units within a single supplier package is coordination. Vanities, ceramics, shower systems, lighting, cabinetry and wall finishes all land on one production and shipping plan, with one set of drawings to reconcile. That matters most on villa projects outside China, where a late storage item means either waiting on a second container or buying something local that does not match.
SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects. Our services cover design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then logistics and door-to-door delivery, installation and after-sales support. Australian villa work sits in that scope — our published project cases include villas in Willoughby, Perth, North Turramurra, Melbourne and Sydney.
For a full bathroom package, the drawer unit is specified alongside vanities, storage units, wall-hung ceramics and Vanity Lighting, so mirror position, vanity height and drawer stack are resolved once rather than in three separate conversations.
A Practical Checklist Before You Release the Order
- Finished-face dimensions confirmed at three points per run, with the floor build-up included.
- Clearance to pipework, concealed cistern frame and any wall-hung basin verified.
- Drawer layout signed off against what each household or guest suite will store.
- Finish and material confirmed from the joinery schedule, with grain direction noted.
- Runner type, load rating and soft-close specified per drawer.
- Datum line agreed with the vanity and adjacent cabinetry.
- Fixing substrate agreed with the builder before walls are closed.
- Room-by-room schedule attached to the order, not one generic specification.
Common Questions From Villa Clients
Can a drawer unit be built to an awkward alcove with out-of-plumb walls?
Yes. Made-to-measure sizing is the normal route, and we build to the finished-face dimensions on your drawing. Where walls are badly out of plumb, we will tell you whether to pack the wall or scribe the unit — that decision belongs on the drawing, not with the installer on site.
Will the finish match a wardrobe supplied under the same project?
Specify both from the same material and finish family in one schedule and they are produced together. That is the practical reason to place bedroom storage and bathroom storage with the same manufacturer rather than sourcing each room separately.
Is the unit delivered ready to install?
Units ship as part of the project package with packaging and container loading arranged by our logistics team, and on-site installation, inspection and snagging are part of our after-sales scope. Confirm the configuration, fixing method and site access for your project before shipment so the delivery sequence matches the site programme.
Specify Santerson Drawer Units for your villa project. Send us your bathroom drawings and joinery schedule and we will return a configuration with dimensions, materials and finishes set room by room — coordinated with vanities, storage and the rest of the fit-out under one production and delivery plan.
Contact: PHILLIP · Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Enquiries answered within 24 hours, Monday–Saturday 8:00 AM–6:00 PM (GMT+8).