A bidet is one of the small fixtures that changes how guests judge a bathroom, yet it is often specified last and ordered in haste. If you are fitting out guest rooms or public washrooms for a hotel project, the Floor Standing Bidet 1038F is a practical place to start: a freestanding ceramic bidet basin that anchors a hygiene station without demanding concealed cisterns or heavy-duty wall framing. This guide walks through the checks a buyer should make before committing a bidet model to a room-by-room schedule, using model 1038F as the worked example.

Why Hotels Add a Bidet Basin to the Guest Bathroom

In many markets a bidet next to the water closet is standard rather than special. For hotel operators serving guests from the Middle East, Southern Europe and parts of Asia, its absence reads as an incomplete bathroom. Adding one raises guest satisfaction at low incremental cost, provided the fixture is chosen so that housekeeping, maintenance and installation crews can live with it for ten years or more.

A freestanding ceramic bidet such as 1038F is fixed to the wall through a back support rather than carried on a concealed frame. That matters on site: no steel stud wall, no in-wall carrier, and no access panel to plan around. For renovation phases where existing partitions stay in place, this keeps the plumbing rough-in simple and keeps the fixture replaceable later by any competent plumber.

Reading Model 1038F Against Your Room Schedule

The published product description for 1038F covers three points that map directly onto procurement decisions:

  • Freestanding structure, wall-fixed at the back. The unit sits on the floor with back support against the wall, so load is taken by the floor and the fixing is mechanical. Wall finishes behind it do not need reinforcement for a hanging load.
  • Ergonomic curved body. The shaped bowl is intended for comfortable personal hygiene use, which in practice means seat height and bowl geometry should be checked against your room layout before the tiles are ordered.
  • Glossy ceramic glaze. A smooth glaze repels dirt and limescale, which shortens daily cleaning time — the single largest lifetime cost of any guest bathroom fixture.

The same page positions 1038F as part of a matched suite with the 1038 series toilet, so shape, glaze and proportions stay consistent across the bathroom rather than being mixed from unrelated catalogues. Where a wall-hung layout is preferred instead, Wall Hung Bidet 1004F is the alternative in our range: vitreous ceramic with a smooth glossy glaze, fixed by a back panel, leaving the floor beneath clear for mopping. Choose it where a floating look and hard-floor cleaning take priority over the simpler floor-mounted installation.

Before you issue the purchase order: dimensions, trap position and rough-in distances for 1038F must be confirmed against the final technical sheet we supply with your quotation. Published product pages are not a substitute for the drawing your plumber works from, and drainage set-outs are fixed once the slab or screed is poured.

The Six Checks That Decide Whether a Bidet Is Right for a Property

1. Drainage arrangement, not appearance, comes first

Confirm the waste outlet position and rough-in against your as-built drawings before selecting a model. A floor-standing bidet normally takes a floor or close-coupled wall waste; a wall-hung unit needs the waste carried into the wall. If the existing set-out does not match, moving the waste in a renovation costs more than choosing a different fixture.

2. Ceramic body and glaze quality

Specify vitreous ceramic with a full glossy glaze. Both 1038F and 1004F are described this way, and the reason is wear: hotel bathrooms are cleaned several times a day with chemicals, and a dense glazed body resists staining, odour absorption and limescale bonding far better than a porous or matte surface.

3. Suite consistency across the floor

Ordering the bidet, water closet and washbasin from one series removes visual mismatch that photographs badly in marketing material. In our 1038 range you can pair the bidet with the Two Piece Washdown Toilet 1038A, which offers both S-trap floor outlet and P-trap wall outlet options, or with the Wall Hung Toilet 1038W where a space-saving wall-hung layout is required. The Wall Hung Basin 1038WB completes the set on the vanity wall.

4. Housekeeping and maintenance access

Ask how the fixture is serviced. Floor-mounted units expose their connections but need cleaning around the base; wall-hung units clear the floor for mopping but require a sound fixing frame behind the tiles. Whichever you choose, keep spare parts of the same model on site — matching a discontinued bidet after three years of operation is expensive and ugly.

5. Mixer, taps and spray set

Bidet bodies are usually supplied without tapware. Decide at specification stage whether you want two-hole pillar taps with a swivel spout or a single lever mixer, and confirm the hole spacing on the ceramic matches the tapware you intend to buy. Ordering these separately is one of the most common causes of delay on site.

6. Quantity, packaging and delivery

Ceramics travel badly when bought in small mixed consignments. Consolidate bidets with the rest of your sanitary ware so that one container, one packing list and one inspection cover the whole order. We pack ceramic ware for export freight and arrange door-to-door delivery by sea, air or rail, including customs paperwork such as commercial invoices, packing lists and certificates of origin.

How a Project Order Is Placed and Delivered

For hotel and villa fit-outs we work from the room schedule rather than a catalogue line. Send us your fixture list with model numbers, quantities and target rough-ins; we confirm what is stocked, what needs production, and what has to be substituted to keep the drainage set-out workable. The steps follow our standard project workflow:

  • Specification review. Your drawings against our technical sheets; substitutions flagged early while changes are still cheap.
  • Quotation and detail confirmation. Model, glaze colour, tapware pairing, packing and marking per room or block.
  • Production and quality control. Sanitary ware produced to the confirmed specification, with pre-shipment inspection before palletising.
  • Logistics. Freight booking, documentation and tracking through to the site or project warehouse.
  • After-sales support. Replacement parts and spares for the models supplied, so future room refurbishments do not break the suite.

Bringing It Back to Model 1038F

Choose the floor-standing 1038F when you want a bidet that installs onto an existing wall and floor, matches the 1038 series toilet and basin, and survives daily commercial cleaning with nothing more than routine wiping. Choose the wall-hung 1004F when the design brief calls for clear floors and a floating line. Either way, lock the rough-in dimensions from the technical sheet before the drainage set-out is signed off — that single decision protects the rest of the specification.

Browse the full range in our Bathroom Sanitary Fixtures category, or send your room schedule and drawings for a quotation on bidets, water closets and basins for the whole project.

SANTERSON — furniture and building materials manufacturer and one-stop supplier for hotel, villa and office projects. Send your sanitary ware schedule and we will quote models, packaging and door-to-door delivery.