A swim spa on a villa terrace or a resort garden is not a single product you pick from a catalogue page. It is a shell, a pump set, a jet layout, a lighting scheme and an electrical load that all have to agree with the slab, the power supply and the people who will use it. The Outdoor Swim Spa WS-S06 sits in the middle of our outdoor swim and hydrotherapy range, and the questions we get about it are almost always project questions rather than product questions. This article walks through the project details that decide whether this model, or another variant in the same family, is the right call.

Start with the room around the spa, not the spa itself

The catalogue dimension for WS-S06 is 5820 × 2220 × 1110 mm. Treat those numbers as the starting point for a site conversation, not as the clearance you need. Three practical points matter more than the shell size: access, structure and water depth.

  • Access route. A shell of this length has to reach the position through gates, side setbacks, lifts or a crane path. On tight terraces we regularly see the delivery route rule out a size that the plan appeared to accept.
  • Support and drainage. The finished slab has to carry the filled weight evenly, and the surrounding finish has to drain away from the shell. Confirm the substrate level and the drainage fall before production starts, not when the spa arrives.
  • Water depth against use. Depth is what separates a hydrotherapy seat from somewhere an adult can stand or a child can play. The catalogue lists 1110 mm as the overall height of this model, so ask for the water depth of the configuration you are buying and check it against how the space will actually be used day to day.

The specification details that change between S06 variants

Clients often ask us for "the S06" as if it were one item. It is a family, and the differences are meaningful once you know what the spa is for. The table below reproduces figures published in the catalogue for three of these models so you can see how quickly the specification moves.

Catalogue itemWS-S06WS-S06CWS-S06M
Dimensions (mm)5820 × 2220 × 11105880 × 2380 × 14005900 × 2200 × 1610
Total power6.35 kW9.95 kW6.95 kW
Water pumps / filter pump2 pcs / 1 pc3 pcs / 1 pc2 pcs / 1 pc
Jet total56 pcs33 pcs48 pcs
Features shown on the pageWater jets, LED lighting, Ozone, Waterfall, 4 water columnsWater jets, Temperature setting, LED lighting, OzoneWater jets, LED lighting, Ozone, 4 water columns

Read those rows as three different briefs. The standard S06 leans on jet count and a waterfall feature; the S06C lists a temperature setting, an extra water pump and a deeper shell; the S06M goes to 1610 mm overall height, which changes both the seating geometry and how the unit reads against a terrace parapet. If your brief says "swim training", check that line explicitly: the catalogue for these three models does not list a swim training system, while other variants in the range do.

Confirm before you order. Pump counts, jet totals, LED quantities and total power are transcribed from the published product pages and they move with the configuration. Ask for the specification sheet of the exact model code you are buying, and confirm the electrical requirements for that configuration before your electrician sizes the supply.

Electrical and plant details people leave too late

Total power is the number that reaches an electrician's drawing, so it should be settled early. Published figures across the S06 family run from 6.35 kW to 13.35 kW depending on pumps and options, which is a wide enough spread to change cable sizing and distribution arrangements on site.

  • Supply and protection. Confirm the available supply, the circuit rating and the protective device arrangement for the confirmed configuration, using local rules applied by the local installer.
  • Plant access. Filter pumps and control systems need to sit where they can be serviced. A spa buried against a boundary with no access panel becomes a maintenance problem quickly.
  • Insulation and heat pump. Both are listed options in the catalogue. On a spa that runs through a cold season, insulation and heating choice affect running load far more than jet count does.

How the project type changes the specification

A private villa, a boutique hotel with several villas and a clubhouse spa are three different briefs even when they use the same shell size. For hospitality work — the kind of coordinated fit-out described on our Hospitality Project Furnishing page — we look at duty cycle first: how many sessions a day, who supervises them, and how quickly the water has to recover between guests. That pushes the specification towards filtration capacity, ozone or UV sterilisation as an option, and durable finishes that tolerate frequent cleaning.

For private villas, the conversation is usually about seating layout, steps, and how the spa relates to the rest of the outdoor living area — the poolside lounge, the outdoor furniture around it, and the shading above it. Our Customizable Shape Outdoor Spa page shows how far shape can be taken — square, round, oval and curved shells — when a terrace plan refuses a rectangle. Where the space is genuinely awkward, that route is often better than forcing a standard shell into a corner.

For comparison across the wider range rather than one model code, our Swimming Pools and Swim Spas category lists the full set of sizes and configurations, including longer layouts that pair a swim current with a separate relaxation area.

A short checklist to send us

  • Site photos and the dimensioned plan, including the delivery route from the gate.
  • Intended use: hydrotherapy, family swimming, swim training, or guest sessions in hospitality.
  • Preferred water depth and seat layout, with the number of regular users.
  • Available electrical supply and where the plant can be located and serviced.
  • Options you want quoted: heat pump, insulation, UV sterilisation, sand filtration, steps, control system.
  • Target handover date for the outdoor area, so production and shipping line up with the site programme.

Send those items and we can come back with a model recommendation instead of a catalogue dump — including whether the standard S06 is right or whether a deeper, higher-power variant fits your slab and supply better.

Talk to us about your swim spa specification

SANTERSON has been manufacturing furniture and building materials since 2008, with outdoor and poolside products supplied for villa, resort and hospitality projects. Share your plan and we will confirm the model, options and electrical requirements for your site before production begins.