A glass sliding door that arrives intact is a matter of packaging decisions, not luck. Large glass leaves are heavy, rigid and brittle at the edges, and a sliding door kit also carries frames, tracks, rollers and hardware that can scratch or bend if they travel loose. Before you place an order, ask your supplier to put the following points in writing — most disputes over damaged doors turn on details agreed too late.

1. How each leaf is supported and separated

Glass should never sit glass-to-glass or glass-to-timber with nothing in between. Confirm that every leaf travels upright in its own crate compartment, fully supported along the bottom edge, with cushioning on both faces and protection on all four edges. Ask what the separating layer is made of, and whether it holds position if a crate is tilted during handling.

For made-to-measure openings — for example glass sliding doors cut to the dimensions of each room — leaf sizes differ from unit to unit, so the compartment layout changes too. Request a packing drawing or photograph showing where each sized leaf sits, and check that your opening references appear on it.

2. Crate construction and lifting points

Ask whether the crates are timber, plywood or reinforced board, and how they are braced. Sliding door glass is usually shipped upright, so a crate built for flat loading will not carry the same loads. Confirm that the crates show marked lifting points and centre of gravity, and ask whether tilt or shock indicators are fitted where the supplier offers them, so your handling crew uses forks or slings in the right places.

Also confirm how the crates fit into the container. A crate that shifts during ocean transit can be damaged by its neighbours even if the glass inside was packed well. Ask for the container loading plan, and check whether braces, air bags or dunnage are used to fill the voids.

3. How frames, tracks and hardware travel

The moving parts of a sliding door fail in a different way from glass: tracks dent, rollers jam, frames get scratched. Confirm that profiles are wrapped individually, supported flat and packed away from the glass so metal cannot rub against it. Handles, locks, guides and adjustment tools should be boxed separately and itemised on the packing list, not left loose inside a crate.

This matters most on project orders where several door types ship together. A villa package mixing wooden sliding doors with glazed panels and other joinery needs each product family packed to its own requirements, with a packing list that matches the room-by-room schedule your site team will work from.

4. Labelling that lets installers identify every piece

Confirm that each crate label states the make-up of what is inside — leaf size, single or insulated glazing, and the toughened or laminated build where your specification calls for it — together with the opening reference it belongs to. Installers should be able to identify every piece from outside the crate without unpacking the whole consignment. If the project requires a particular safety glass build, that requirement must be agreed before production and repeated on the labels.

Confirm dimensions, glazing make-up and finish for each opening in writing before production starts. Packaging built to the wrong specification protects the wrong door.

5. Documents that travel with the shipment

A clean delivery needs paperwork that mirrors the crates. Confirm in advance that you will receive a packing list keyed to crate numbers and opening references, a container loading plan, the commercial invoice, and whatever customs documents your import requires. Where the supplier arranges freight forwarding and door-to-door delivery, ask who prepares those documents and who carries responsibility if they are wrong.

6. Inspection rights and what happens if something is damaged

Agree the inspection process before the goods leave: photograph each crate on arrival, record any triggered indicator on the delivery note, and open suspect crates with two people present. Confirm in writing how replacement glass is produced and shipped if a leaf is damaged — whether it is remade to the original made-to-measure size, who pays the freight, and how the rest of the order is protected while that happens.

A quick pre-shipment checklist

Point to confirmWhat a clear answer looks like
Leaf supportUpright, one leaf per compartment, cushioned faces, protected edges
Crate buildMaterial and bracing stated; lifting points and centre of gravity marked
Container stowageLoading plan supplied; voids filled; crates blocked and braced
Frames and hardwareProfiles wrapped and supported flat; hardware boxed and itemised
LabellingCrate number, opening reference, size and glazing build on every crate
DocumentsPacking list keyed to crates; invoices and customs papers agreed in advance
Damage handlingWritten process for inspection, remake and replacement freight

The point to take away

Packaging for glass sliding doors is a specification item, not a courtesy from the supplier. Confirm the crate design, stowage plan, labelling and damage process before production begins, and hold the supplier to the same drawings you approved for the doors themselves. Suppliers quoting turnkey projects, with furniture logistics and door-to-door delivery in scope, should already have these answers prepared; if they cannot give them, expect to carry that coordination burden yourself on site.