Doors & Joinery Procurement

Interior doors are one of the last packages a hospitality project signs off and one of the first things every guest touches. A wood veneer hinged door has to look consistent across dozens of identical rooms, survive housekeeping carts and luggage impact, and still sit square in its frame after two heating and cooling seasons. That is why the door schedule deserves the same procurement discipline as casegoods or stone: it needs a defined opening list, a fixed finish system, ironed-out hardware coordination, and one supplier accountable for the whole set.

This guide walks through how buyers, contractors and designers specify Santerson Wood Veneer Hinged Doors for a hotel, serviced apartment or resort project — from the room-type schedule to the mock-up sign-off and the delivery sequence.

Why wood veneer hinged doors end up on hospitality schedules

Hinged (swing) doors remain the default for guest-room entrances, bathrooms and back-of-house rooms because they seal better than most sliding options, use hardware every local tradesman already knows, and are the easiest set to replace one leaf at a time during operation. The veneer face is what carries the design intent: it lets the door leaf read as part of the wall paneling and joinery family rather than as separate bought-in items.

SANTERSON's product page for this line describes a configurable scope — finish, layout and dimensions specified per space, with made-to-measure sizing plus material and finish options. For a project that means the same veneer species and cut can be carried across doors, wall paneling and built-in cabinetry when those packages come from one manufacturer, which is exactly where grain and sheen consistency becomes manageable instead of a headache.

Where the range fits in a typical schedule:

  • Guest-room entry leaves — full-height veneer faces aligned with the corridor paneling, usually specified with the matching frame and architrave from the same batch.
  • Bathroom and ensuite doors — same species, with a finish and core build confirmed against bathroom humidity for that specific project.
  • Suite and villa openings — wider leaves, feature grain matching, or a switch to Santerson Wood Veneer Pocket Doors where a swing leaf would fight the furniture plan.
  • Suites and lobbies needing flush detailing — Santerson Flush Hinged Doors when the brief calls for a minimal, wall-aligned reveal instead of a visible frame.
  • Corridor and back-of-house sets — where durability and hardware duty class matter more than figure-matched grain.

Step 1: Build the door schedule before asking for a price

A quotation is only comparable if every supplier is pricing the same thing. Before any enquiry goes out, lock down a schedule with one row per door type, not one row per room:

Schedule fieldWhat to fix before quoting
Leaf size and quantityClear opening width and height per room type, plus the total leaf count including spares. Made-to-measure production means non-standard sizes are possible, but each new size adds tooling and packaging variants.
Wall build-upFinished wall thickness at each location so frames, jambs and architraves arrive matching the partition, not approximated on site.
Veneer species, cut and gradeSpecies, slicing direction (rotary, crown or quarter), grain figure allowed, and the acceptable colour range across a batch.
Finish systemSheen level and lacquer type, plus whether the finish is applied at the factory for all faces and edges.
Core and performance intentWhat each leaf must achieve — acoustic separation between rooms, fire-rated locations, impact resistance in high-traffic areas — so the build-up is engineered per location rather than guessed.
Hardware packageHinge type and count, lock body format, lever set, closers, door stops and seals, with cutouts pre-machined to the exact hardware you will install.
Interface detailsThreshold levels, floor finish build-up, seal and drop-bottom requirements, plus signage or room-number plates.

Two practical habits pay for themselves later. First, mark every opening on the drawings with a door-type code that matches the schedule, so a site query never turns into "which one is this?". Second, group openings by type rather than by floor: a hospitality project usually has three to six recurring room types, and keeping the count tight keeps grain matching, pricing and installation sequencing manageable.

Step 2: Specify veneer, core and finish against real conditions

Veneer and visual consistency

With veneered doors the risk is never one bad leaf — it is twenty leaves that look slightly different once they are installed under corridor lighting. Specify the species and cut, agree a colour range with physical samples, and ask for leaves from the same production batch to ship together in one container. If your project also uses Wood Veneer Panels on feature walls, order doors and panels against the same approved sample so grain direction and sheen line up where the two meet.

Core build for the location, not the catalogue

Guest-room entry leaves face noise from the corridor; bathroom leaves face humidity cycles; back-of-house doors face trolleys. Rather than choosing one construction for the whole building, list performance intent per door type and let the build-up follow it. For acoustic partitions, the leaf is only half of the result — frame detail, seals and threshold detailing decide whether the target is met on site.

Finish system and edge treatment

Confirm that all six faces are finished, including the top and bottom edges of leaves going into wet or humid locations. Factory-applied finishes with a controlled curing environment give you far more consistent sheen than site touch-up, so plan for pre-finished delivery and protect the leaves on site instead.

Verification note: The manufacturer's own page states that dimensions and selected specifications must be confirmed for each project, and that these listings give a configurable overview rather than a fixed spec sheet. Treat species availability, core construction, fire and acoustic performance, hardware compatibility and finish systems as items to confirm in writing for your order — not as assumed catalogue facts.

Step 3: Mock-up one room type before releasing the full order

For any door package above a handful of leaves, request a mock-up set — one leaf with its frame and architrave, finished, hardware machined — and install it in a test location. The mock-up review is where you check:

  • Colour and grain against the approved sample under actual corridor and room lighting.
  • Frame-to-wall alignment, architrave profile, and how the reveal reads next to the joinery already installed.
  • Hinge positions, latch feel, closer speed, and clearance over the finished floor level.
  • Edge and face finish quality after transport, unpacking and installation.

Sign the mock-up off in writing with photographs, keep one spare leaf stored on site as the reference standard, and only then release the production order for the remaining room types. This single step removes most of the arguments that appear at handover.

Step 4: Sequence production, packaging and delivery around site programme

Made-to-measure doors arrive in two failure modes: too early, so they sit on site absorbing moisture and getting damaged, or too late, so painting and flooring stall behind them. Plan the door package against the actual installation window:

  • Release by zone. Order the first building block or floor first; keep later phases for the second shipment once the mock-up standard is fixed.
  • Pack by room type, not by size. Leaves and their matching frames labelled with the door-type code and room number go straight to the right opening, which cuts installation time and prevents mixed batches.
  • Ship hardware and leaves together. Pre-machined cutouts are only useful if the specified hinges and lock bodies land in the same delivery.
  • Hold spares. Order a percentage of extra leaves for future replacement during operation — matching veneer is far cheaper to buy with the original batch than years later.

SANTERSON's logistics service covers international freight forwarding, customs documentation, packaging and container loading through door-to-door delivery. Confirm Incoterms, duties, insurance and the exact delivery point for your country in the contract; transit arrangements and lead times should be agreed per project rather than assumed from marketing material.

Step 5: Coordinate with one supplier across the fit-out

Doors rarely fail alone — they fail at the junction with wall paneling, flooring levels and built-in joinery. Consolidating doors with the related timber packages from a manufacturer that also produces wall paneling, cabinetry and custom millwork means one production schedule, one approved finish standard and one point of accountability for the timber scope. That is the practical reason hospitality buyers group these packages instead of running five separate tenders.

SANTERSON positions itself as a China-based furniture and building materials manufacturer offering custom/OEM work alongside design coordination, production, logistics and after-sales support — services relevant when your door schedule has to match joinery you are already buying. Ask what the custom service actually covers for your project: prototype approval, finish matching to existing samples, and drawing coordination with your local detailer.

Buyer's checklist before signing the purchase order

  • Door schedule signed off: quantities, sizes, wall thicknesses and door-type codes reconciled with the latest architectural drawings.
  • Veneer sample approved physically, with a stated colour range and grain allowance for the batch.
  • Core build and performance requirement confirmed per door type in writing.
  • Finish system, sheen level and six-face finishing confirmed; factory-finished delivery agreed.
  • Hardware schedule matched to machined cutouts, with hinge duty class and lock format fixed.
  • Mock-up installed, reviewed under real lighting and approved before mass production is released.
  • Delivery split by zone, packing labelled per room type, spares included in the order.
  • Inspection points agreed: pre-shipment approval photographs plus a receiving check against the schedule on site.

FAQ

Can hinged, pocket and folding leaves share one veneer specification?

Yes, and it is worth doing. Specifying the same species, cut and finish across hinged, pocket and Santerson Wood Veneer Folding Doors keeps the design language consistent where room types differ. Confirm each mechanism's frame and track detail separately — the finish can match while the ironmongery differs completely.

What is the difference between this line and flush hinged doors?

Both are swing doors; the difference is the reveal. A wood veneer hinged door is typically presented with a visible frame and architrave detail, while flush hinged doors are detailed to sit wall-aligned with a minimal or concealed frame. Choose per location: guest-room corridors often suit the flush detail, while renovation contexts and standard partitions are usually easier with a conventional frame.

How should I handle veneer consistency across many identical rooms?

Keep the room types few, order each batch together, ship them in one consignment, and approve a physical sample with an agreed colour range before production. Then install a mock-up under real lighting so you catch variation before it repeats down a corridor.

What documentation should I require with the shipment?

Ask for the as-built door schedule matched to packing labels, finish system details, hardware specification, and your chosen shipping documents (commercial invoice, packing list, certificate of origin). Keep approved samples and mock-up photographs in the project file — they become the reference standard at handover and for future replacements.

Send us your door schedule

Share your room-type schedule, drawings and finish references, and our team will review them with you against the Wood Veneer Hinged Doors configuration options — sizing, veneer and finish selection, hardware coordination and phased delivery.

Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com

Enquiry page: SANTERSON Contact Us