A single swim spa crossing an ocean is not a parcel. It is a 7-metre fabricated shell with pumps, jets, lighting and a control system inside it, and every one of those components has to arrive working. Below is the practical sequence we follow when a project team orders the Outdoor Swim Spa WS-S07B-T for a villa, resort or wellness facility overseas — from the first specification sheet to handover on site.

Start With the Configuration, Not the Freight Quote

Freight cost and packing method both depend on what the unit actually contains when it leaves the factory. The WS-S07B-T is listed in our catalogue at 7000 × 2200 × 1365 mm, with a swim training system, water jets, LED lighting and ozone sanitisation as shown features. Before any shipping discussion begins, we ask the buyer to confirm each line item against that configuration:

ModelWS-S07B-T
Catalogue dimensions7000 × 2200 × 1365 mm
Control system1 set
Swim training system1 set
Water pump / filter pump1 pcs / 1 pc
Jet total44 pcs
LED lighting3 lights; 26 small LED lights
Total power8.75 kW
Optional accessoriesControl systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation, steps — availability and compatibility vary by model

Two of these lines change the shipping plan more than anything else. The first is the accessory list: a heat pump, a sand filter and an insulated cabinet add their own crates, their own weight and sometimes their own customs classification. The second is total power. At 8.75 kW, the spa needs an electrical supply that matches it, and the supply available on site determines which pumps, controls and heating option we build in. We would rather resolve this during the quotation stage than after a container has been booked.

Confirm the Site Conditions Before Production Is Scheduled

A project order fails far more often at the receiving end than in transit. For this model, we ask for four things in writing before production starts:

  • Access route. A 7000 mm shell needs a clear path from the delivery vehicle to the pad. Measure gates, side passages and turning radii, and note overhead wires or canopies along the route.
  • Slab and bearing. Confirm the finished pad level, its load rating and drainage around the perimeter. The catalogue depth of 1365 mm matters for how much of the shell sits above the finished ground line.
  • Electrical provision. Phase, voltage, dedicated circuit sizing and the location of the isolator — all matched to the confirmed configuration rather than a generic assumption.
  • Water, drainage and commissioning access. Fill source, drain point, and enough working space for the filter pump and control system to be serviced after handover.

If the spa is one element of a wider outdoor build — decking, paving, a pergola or poolside lounge — it belongs in the same programme as those trades. Our Interior Design Services team handles that kind of coordination on villa and hospitality projects: space layout planning, furniture layouts and 3D renderings, and design coordination through to on-site guidance.

Choose the Packing and Container Plan Around the Unit

Swim spa shells are long, and the constraint is almost never weight — it is length and protection of the acrylic or composite surface. Our Logistics & Door-to-Door Delivery team arranges freight by sea, air and rail, and for an item of this size the normal answer is ocean freight with a container selected against the measured crate dimensions rather than the catalogue dimensions. In practice we decide three things together with the buyer:

  • Consolidated or separate. If the same project is also ordering outdoor furniture for villas and resorts, pergolas, loungers or cabana daybeds, those items can share the container and reduce handling on site. Loose furniture crates are generally loaded alongside or after the spa shell so that nothing abrasives sits against it.
  • How loose equipment travels. Jets, LED fittings, control components and any heat pump or sand filter option may ship crated inside the shell or as separate packages, depending on what protects them best over the route booked.
  • Who books the vessel. We handle packaging and container loading, customs paperwork and shipment tracking, and we can arrange cargo insurance for the consignment. The Incoterms agreed in the quotation decide where our responsibility ends and yours begins, and that line should be explicit before payment terms are signed off.

Get the Export and Import Paperwork Right the First Time

Delay at a destination port usually traces back to documents, not cargo. For a swim spa consignment we prepare commercial invoices, packing lists and certificates of origin, and where the importing country requires permits we work through them with the buyer's clearing agent. The paperwork has to describe what actually shipped — model number, quantity of crates, gross and net weight, and the accessory items listed separately if they travel in their own packages.

Two points are worth raising with your customs broker before the vessel sails:

  • Duty classification of options. A heat pump or sand filter shipped as a separate package may be assessed differently from the spa shell. Ask the broker how they want those lines presented on the invoice.
  • Electrical components and local requirements. Import rules for electrical equipment differ by market. Tell us the destination country early so the control system, pumps and lighting specified at order stage are compatible with what the site can legally and practically energise.

Sequence the Delivery Against the Site Programme

A spa delivered before the pad is finished sits in the weather; a spa delivered after the decking is closed in has nowhere to go. On project orders we align the production completion date with your site programme and confirm the delivery window once the vessel has an ETA, so that the receiving team, lifting equipment and any crane or forklift are booked for the same day.

Our Installation & After-sales Support covers on-site installation, inspection and snag lists, spare parts and ongoing maintenance. For a swim spa this is where commissioning happens: filling, energising the control system, checking each of the jet circuits and the swim training unit, verifying ozone or optional UV sanitisation, and confirming that LED circuits and steps are correctly fixed. We record what was tested at handover so both sides have the same reference point if a fault appears later.

A Pre-Order Checklist for Project Buyers

  • Configuration signed off line by line, including which optional accessories are in the order.
  • Site measurements: access route, pad level and load, drainage, electrical provision.
  • Incoterms, named place of delivery and who arranges inland transport at destination.
  • Clearing agent identified, with draft invoice and packing list reviewed before shipment.
  • Delivery date matched to site programme, with lifting equipment booked.
  • Commissioning and snag process agreed, including spare parts contact after handover.

On the numbers in this article: dimensions, jet counts, lighting counts and the 8.75 kW figure are the values published for WS-S07B-T in our catalogue. Optional accessories vary by model and configuration. Treat them as the starting point for a quotation, not as a fixed specification — we confirm the exact build with you before production.

Ordering It as Part of a Larger Project Package

Most swim spa orders we ship are not standalone. They arrive together with pergolas, sun loungers, daybeds and the interior fit-out of the same villa or resort. Buying through a One-stop Furniture and Building Materials Supplier means one production schedule, one consolidated shipment and one point of contact for snags across all of it — which is materially easier to manage than coordinating six separate vendors against the same site programme. Where a project needs non-standard finishes or dimensions, our Custom & OEM Service covers bespoke material finishes and textures, prototyping and private labelling.

Planning a project order for the WS-S07B-T or another model in our swim spa range? Send us the destination country, your site measurements and the accessories you want included, and we will return a configuration sheet with a freight plan built around it. Contact PHILLIP — Phone / WhatsApp +86-13928214007, email santerson@qq.com — or send your enquiry through our contact page.