A two tone acrylic wardrobe looks simple on a render and complicated on the workshop floor. The gloss panel that reads as "off-white" in your mood board can read as cream once it sits next to a matte charcoal carcass under warm downlights. Getting that right is not a matter of luck — it is a matter of what you hand the factory before the first cutting list is drawn. Below is the brief we work to, and the information that lets us quote, sample and build without three rounds of corrections.
What "two tone" actually commits you to
Two tone means two surface finishes on one joinery item: usually a door face in one colour or sheen and a carcass, return or open niche in another. In our Two Tone Acrylic Wardrobes the split is decided per project — finish, layout and dimensions are specified to suit each space rather than chosen from a fixed size grid. That flexibility is the reason the brief matters. When nothing is fixed until you confirm it, every decision you leave open comes back later as a change order.
The wardrobe itself sits inside our Acrylic Wardrobes collection alongside Matte Acrylic Wardrobes and the high gloss variants, so if a two tone scheme is only half working, we can usually move one side of the pair rather than rebuild the whole run.
The six items that belong in your brief
Send these and we can quote properly. Leave them out and the first reply will simply be a list of questions.
| Item | What to state | Why it changes the build |
|---|---|---|
| Room and unit count | Master, second bedroom, hallway run, plus how many linear metres per room | Determines whether a made-to-measure item or a modular layout is more efficient |
| Door system | Hinged, sliding, corner, walk-in or open — and the clear opening width | Sliding and corner units need different tolerances and hardware than hinged doors |
| The two tones | Which surface is which colour, and whether both are acrylic or one side is another material | Mixing an acrylic face with a veneer or glass return changes edge treatment and lead sequencing |
| Sheen split | Gloss with matte, gloss with gloss, or matte with a textured panel | Gloss and matte reflect differently; the pairing decides how visible fingerprints and light banding are |
| Interior configuration | Hanging heights, drawer stacks, shelves, lighting, mirror or glass inserts | Internal fit-out is cut into the carcass, so it has to be known before panels are machined |
| Site conditions | Floor and ceiling levels, skirting, cornice, doors or radiators in the run, access to the room | Built-in joinery is set out against real walls, not drawing lines |
Give us the drawings you already have
A dimensioned plan, an elevation of each run, and a finish schedule with two or three reference samples is enough to start. If your scheme came from a designer, send their boards — we work from them constantly. Where there are no drawings yet, our interior design service covers space layout planning, concept and mood boards, furniture layouts and 3D visual renderings, so the wardrobe can be resolved against the room instead of guessed at.
How to specify the colour split without surprises
Three practical habits save more rework than any other part of the brief:
- Name the dominant tone and say which surface carries it. "Charcoal doors, warm grey carcass" is a specification. "Dark and light" is not.
- Decide the sheen before the colour. A gloss panel picks up the room; a matte panel absorbs it. The same grey behaves differently in each, and samples photographed under studio light will not show you that.
- Order physical samples and view them on site. Ask for both finishes side by side, taped to the wall where the unit will stand, and look at them morning and evening. Where an exact match to another fitting matters — a two tone acrylic kitchen visible from the bedroom, for instance — send us a sample of that existing surface rather than a colour name.
One thing we will not do is promise that a named brand colour matches our acrylic batch. Where a match to an existing fitting is critical, we confirm it against a physical sample you approve before production, and the approved sample becomes part of the order record.
What we need to know about the make
Our custom and OEM service covers bespoke finishes and textures, prototyping and made-to-measure sizing, with flexible minimum order quantities. For wardrobes that means we can vary the door profile, the panel split, edge detail and interior layout per project — but it also means each variation has to be written down and signed off. Our working sequence is straightforward: a project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up. Nothing enters the cutting queue until the details are confirmed in writing.
If you are buying wardrobes alongside other joinery for the same building — cabinetry, vanities, wall panelling, doors — group them on one order. Same supplier, same finish references, one coordination thread instead of several.
Delivery, installation and what happens after
Freight is arranged by sea, air or rail with customs paperwork, packaging and container loading handled on our side, and door-to-door delivery to the site. For projects outside China we normally split a joinery order into loads by room so the bedroom run is not sitting behind a kitchen that has not cleared yet.
On arrival we cover on-site installation, inspection and snag lists, with warranty coverage and spare parts handled afterwards. Where an acrylic door panel is damaged in the course of site works, replacement is straightforward when the approved finish reference and cutting list are still on file — which is one more reason to keep the sample and the confirmed drawings rather than discarding them at handover.
Questions we get asked most
Can I change the colour split after production starts? Not on panels already cut. Colour and sheen are fixed at detail confirmation; that is the point of the sign-off stage.
Is two tone available on sliding as well as hinged doors? Yes, both configurations are made to measure — send the clear opening width and we will tell you which system suits the run.
What if my ceiling is not level? Common in older villas and renovated homes. Built-in units are set out against measured levels; we work from site dimensions rather than nominal drawing sizes, and scribe or panel returns handle the difference.
Can I order one wardrobe to test the finish before a whole floor? Yes. A sample unit is the usual way to prove colour, sheen and interior layout across a multi-unit order.
Send the brief
SANTERSON has been making furniture and building materials in China since 2008, supplying project orders that need joinery, fixtures and finishes coordinated by one team. If you have drawings, send them; if you have a mood board and a rough dimension, send that instead and we will come back with questions and options.
Contact PHILLIP for wardrobe enquiries — email santerson@qq.com, or phone/WhatsApp +86-13928214007. Enquiries are answered within 24 hours during our working week, Monday to Saturday, 8:00 AM–6:00 PM (GMT+8).