A matte acrylic wardrobe rarely fails in the workshop. It fails in the approval chain, where four or five people sign off on a finish they have only ever seen as a photograph. This guide sets out how to sequence those approvals so the finish, the layout and the delivery date all survive contact with the client, the designer, the builder and the procurement team.

Why this finish creates more sign-offs than most

A soft-touch matte surface reads as calm and seamless in a rendered drawing, which is exactly why so many people feel entitled to an opinion about it. Three characteristics drive the extra review rounds:

  • The sheen is subjective. "Low gloss" means something different to an interior designer, a developer's sales agent and a trade buyer. Unless the wording is fixed in writing, each reviewer pictures a different panel.
  • Fingerprints and cleaning become project politics. In a family villa or a hotel room turned over daily, housekeeping and end users form views about marks within days of handover.
  • The doors are large, flat and continuous. Any variation in tone between adjacent panels is visible across the whole wall, so approvals that should have covered batch and direction of grain get escalated late.

Our Matte Acrylic Wardrobes are made to measure, with the finish, layout and dimensions specified per project. That flexibility is an advantage in production and a risk in approval, because it means almost every variable is still open when the drawings arrive for signature.

Map the approvers before you draw anything

Before a single dimension is confirmed, list who has to approve what. On residential and villa projects we typically see four roles; on hotel and apartment schemes there are usually six or more.

ApproverWhat they actually decideWhere they usually block the job
Client or end userColour, handle style, internal layout for their own wardrobe habitsWants a change after doors are ordered because the sample looked different at home
Interior designerFinish, panel direction, how the doors meet skirting, ceiling and adjacent joineryAsks for a softer sheen once other finishes on site are installed
Main contractor or builderOpening sizes, floor level, wall squareness, access for deliveryLevels and finishes change after the wardrobe dimensions were signed off
Procurement or developer representativePackage price, unit-to-unit consistency, replacement stockNeeds identical panels across units sourced at different times

Put each name against a single deliverable — finish sample, elevation drawing, internal layout, delivery window — and give every item one decision-maker rather than a committee. Two approvers with equal authority over the same panel is the most common cause of a re-made door set.

Set the approval order, not just the approval list

Sequencing matters more than speed. Finish sign-off should be locked before layout drawings are circulated, because once someone sees a full wardrobe elevation they start judging proportion and colour together, and every later colour change re-opens drawings everyone already signed.

Stage 1 — Confirm the finish on a physical panel

Approve the surface from a sample that is at least A4 in size, viewed in the actual room under both daylight and artificial light. Screen colours are not a basis for sign-off on any matte product. Record the approved sample with a reference code and keep the physical piece; it becomes your evidence at handover if a reviewer later claims the installed doors do not match what they saw.

Stage 2 — Confirm the door style and opening type

The same matte finish behaves differently on hinged, sliding and handleless panels. Sliding leaves a visible reveal between leaves; handleless relies on shadow gaps that must be agreed with the builder's ceiling and floor lines. If your project needs sliding doors in this finish, review Matte Sliding Door Wardrobes at the same time as the finish sample so the door type is approved alongside it.

Stage 3 — Confirm internal layout with the end user, not the designer alone

Hanging heights, drawer zones and shelf spacing are personal. Hand the end user a simple layout sheet and let them move things once, before production. Where storage capacity rather than appearance is the priority, a custom minimalist bedroom wardrobe brief — flat panels, handleless fronts, custom internal zoning — gives you a structure to react to instead of an abstract drawing.

Stage 4 — Confirm site conditions with the builder in writing

Floor finish height, wall squareness and ceiling level all change the made-to-measure envelope. Ask the contractor to confirm these figures against the same drawing they sign, dated. This is the single most effective way to prevent a wardrobe that arrives correct on paper and wrong on site.

Run one consolidated approval document

Send finish, elevation, internal layout and site dimensions as a single pack with a signature block for each role. Separate emails create separate versions, and version drift is how jobs end up built to superseded information.

  • Number every sheet and date it; state clearly which sheets require a signature and which are for information only.
  • Require one written reply per role. Silence is not approval, and verbal approval from a site meeting has no value at handover.
  • Log the decision-maker's name, the date and the sheet number for each sign-off.
  • Set a change cut-off: after production release, changes are quoted as variations rather than absorbed quietly.

Practical rule: if an approver cannot state which sheet they signed and what on it, the approval has not happened yet. Re-circulate that sheet before releasing production.

Handle the change requests you will actually receive

Three requests account for most of the delay on matte wardrobe packages:

  • "Can we go slightly lighter?" Answer with samples, never with a description. Re-approving a colour after layout sign-off means re-issuing every elevation.
  • "Can this unit match the kitchen fronts?" Wardrobe doors and Matte Acrylic Cabinets for the kitchen can be specified in coordinated finishes, but they should be ordered as one package with one finish reference so both come from matching production runs.
  • "Can we mix a glass insert into one door?" Combination designs such as Glass & Acrylic Combination Wardrobes are workable, but a late mix of materials changes hardware, lead time and price. Decide it at Stage 2.

Close out with a handover checklist

At installation, walk the room with the same people who signed the drawings. Check door alignment and gaps, that every panel matches the retained sample, that drawers run freely, and that the internal layout matches the sheet the end user approved. Give the client one file containing the approved sheets, the finish reference and the contact for after-sales support. That document is what protects you when someone asks, months later, why the doors are not gloss.

SANTERSON supplies made-to-measure wardrobes, cabinetry and interior fixtures for villa, apartment and hospitality projects, with custom/OEM specification, door-to-door delivery and installation support. Send us your drawings and finish references and we will return a wardrobe package your approval chain can sign in one pass — contact PHILLIP on +86-13928214007 or through our contact page.