Sliding storage panels look simple on a drawing and behave very differently on site. Panel weight, track tolerance, wall flatness and the internal fit-out all decide whether the wall glides quietly for years or binds within a season. If you are sourcing Santerson Sliding Storage Panels for a villa, apartment or hospitality project, the manufacturer you choose matters more than the finish you choose. The steps below are the ones we use to cut a long supplier list down to two or three vendors worth quoting.

Start With the Scope, Not the Supplier List

Before contacting anyone, write down what each wall has to do. Sliding panels can close over storage, hide a television, screen a doorway or divide a room, and each duty carries different hardware and detailing. Note the opening width and height, the number of panels per run, how much of the opening must be clear when the panels are parked, and what sits behind the panels — shelving, hanging rails, drawers, an appliance recess or a television.

Also record the substrate you will fix to. A finished concrete or masonry wall, a framed partition and an uneven older wall each need different fixing details and sometimes additional blocking. Send that information with your enquiry rather than waiting for it in a later email exchange; suppliers who quote without knowing it are guessing.

Confirm the Manufacturer Actually Builds Made-to-Measure Panels

Santerson Sliding Storage Panels sit within our Integrated Storage Walls collection and are specified to project dimensions, with layout, material and finish selected per space. That made-to-measure approach is what you should be checking for in any manufacturer you shortlist, because off-the-shelf panel sizes rarely fit a full-height wall cleanly.

Ask three direct questions:

  • Can the panel size, track length and panel count be changed per opening, or only chosen from fixed options?
  • Which finishes can be supplied — veneer, lacquer, melamine, textured or stone-look surfaces — and can the finish match other joinery in the same project?
  • Who produces the internal fit-out behind the panels: the same factory, or a separate cabinet shop?

A manufacturer that runs cabinetry, wardrobe doors and wall panelling under one roof can usually match grain, sheen and edge detailing across your whole joinery package. That consistency is where most project headaches come from when the work is split between three vendors.

Check Hardware, Not Just the Panel Face

The visible surface sells the design; the hardware decides whether it survives daily use. Ask which sliding system is used, the maximum panel weight and size it supports, whether the track is top-hung or floor-mounted, and how the panels are guided at the base. Floor tracks collect grit in high-traffic areas and need a cleaning routine, while top-hung systems transfer load to the header and demand solid fixing above the opening.

Then ask what happens when hardware fails in two or three years: are replacement runners, guides and handles stocked as spare parts, and can they be shipped individually? A supplier who only ships complete panels will leave you matching a discontinued profile.

Review the Finishes Against Real Samples

Photographs flatter veneers and hide orange peel in lacquer. Before any purchase order, request physical samples of the panel face, the edge treatment and the frame or reveal profile if one is used. Look at them under the lighting you plan to install, at an angle, not straight on.

For projects that also include wardrobes or media walls, ask for the same finish in a second product family. Our catalogue covers closet sliding panels, sliding panel TV systems and acoustic sliding panels, which means one specification can carry across bedrooms, living rooms and dividing walls without changing manufacturer.

Score Suppliers on Their Drawing Process

A serious manufacturer returns shop drawings before you commit. Ask for a set showing panel elevations, track positions, fixing details, clearances at floor and ceiling, and the internal layout behind each panel. Read those drawings as an installer would.

What to look forAcceptableWarning sign
DimensioningSizes taken from site or agreed setting-out drawings, tolerances statedCatalogue sizes carried straight onto your wall
Hardware scheduleNamed system, load rating, quantity per run"Sliding hardware included" with no detail
Internal fit-outShelf, rail and drawer layout drawn to your storage needsEmpty cavity behind the panels
Interface notesHow panels meet flooring, skirting, ceiling and adjacent joineryNo mention of surrounding finishes
Approval stepSigned shop drawings before production startsProduction begins on a purchase order alone

Test Their Ability to Coordinate the Rest of the Fit-Out

Sliding panels rarely arrive alone. Flooring, wall panelling, doors, lighting and cabinetry usually meet them at a reveal. Ask how the manufacturer coordinates with other trades: do they issue setting-out drawings for the builder, confirm sequence of installation, and send fixings that suit your substrate?

For imported packages this extends to freight. Our logistics and door-to-door delivery service covers freight forwarding, packaging and container loading, customs paperwork and shipment tracking, so panels arrive on site rather than at a port with the last leg left to you. Ask any shortlisted supplier exactly where their responsibility ends: ex-factory, CIF, or delivered to the room of installation.

Verify After-Sales Before You Compare Prices

Compare quotes only after each supplier answers the same after-sales questions in writing: what is covered, for how long, who attends site if a panel needs adjustment, and how replacement parts are supplied. A slightly dearer package with clear support usually costs less than a cheap one that leaves your site team solving track alignment alone.

Shortlisting checklist. Made-to-measure sizing confirmed; hardware named with load rating; physical finish samples in hand; shop drawings returned before production; interface details with flooring and ceiling stated; freight scope defined to site; spare parts availability confirmed. Two suppliers who clear all seven are enough to run a final comparison.

Working With SANTERSON

SANTERSON has been manufacturing furniture and building materials in China since 2008, and supplies custom and OEM joinery, wall systems and interior fixtures for villa, hospitality and office projects. Sliding storage walls are specified to your dimensions and finished to match the surrounding cabinetry, with custom and OEM service covering material selection, prototyping and branding where required. Send us the wall elevations, the substrate condition and the finish you are working to, and we will return drawings and a quotation for review.

Enquiries and project drawings can go through our contact page, and related wall systems in the same collection — full height storage walls and partition sliding systems — can be specified together if one manufacturer is to carry the whole joinery package.