A high gloss veneer wardrobe looks flawless in the showroom render and in the first week after installation. The finish that sells it, however, is also the surface that shows fingerprints, swirl marks, edge lifting and every misalignment between door and carcass. That is why experienced buyers judge this product twice: once when they approve the sample, and once when they read what happens after the wardrobe leaves the factory. Before you place an order, here are the after-sales details worth putting in writing.
1. What exactly does the warranty cover on a veneer surface?
Ask for the warranty terms as text, not as a sentence in a quotation. For High Gloss Veneer Wardrobes, the practical questions are narrower than "is it covered": which defects count as manufacturing faults, and which get classified as on-site damage. Adhesive failure at the veneer edge, gloss-layer separation, discolouration under normal indoor use and hardware failure usually belong to the supplier. Chips caused by impact during site works, water left on a door face, or cleaning with an abrasive product usually do not.
Also ask what the remedy looks like in practice. A replacement panel shipped from the factory is easy to promise; matching that replacement to a wardrobe that has been in a lit room for two years is the hard part. Veneer and gloss surfaces can read slightly differently across production batches, so confirm whether the supplier will keep your batch reference and whether a matched replacement door or panel can be produced later.
2. Who installs it, and who answers when the doors do not line up?
Most complaints about glossy wardrobes are alignment complaints: a door that sits a few millimetres proud, a sliding panel that rubs the track, a light gap along a scribed edge. These are installation issues that surface days after handover, so the ownership of them must be settled before delivery. SANTERSON lists on-site installation, inspection and snag handling as part of its installation and after-sales support, which is useful when a project needs one party responsible for both production and fitting rather than two parties arguing across a shipping container.
Whichever route you choose, get the same three answers: who attends site to install, who signs off the snag list, and who pays for the second visit if the wardrobe has to be re-scribed to an uneven wall. For villa and hotel work in Australia, also confirm whether installation is carried out by the supplier's own team or by a local contractor engaged on your side.
3. Can spare parts still be obtained in three years?
Wardrobe bodies last far longer than the hardware bolted to them. Ask for the hinge, slide, handle and track brands and model references used on your order, and keep them with the drawings. A supplier who states spare-parts supply and replacement as part of after-sales service should be able to quote those parts by reference number later, without a new shop drawing.
For made-to-measure work this matters more than for stock furniture. If a bespoke door panel has to be remade, you are not buying a panel; you are re-entering a production run. Confirm the supplier can reproduce your finish from an approved sample and that they retain the project specification.
4. What response time is written into the agreement?
SANTERSON's after-sales page states response and issue-resolution targets, including a 48-hour aim. Treat published figures as a starting point for negotiation rather than an entitlement: confirm in your contract what "response" means (a reply, a diagnosis, or a dispatched part), which defects fall inside the stated window, and how a claim is raised once the project is handed over.
5. What maintenance guidance comes with the handover?
A glossy veneer door fails early mainly through cleaning habits. Ask for written care instructions covering what to wipe the surface with, what to avoid, and how to treat the edges where moisture collects. Then check whether those instructions are attached to the project file or only printed on a leaflet that disappears during site cleaning. For hospitality work, this document becomes part of the operator's housekeeping brief.
6. How is damage found after the container is opened?
Photograph packaging and panels at the moment of unpacking, note any damage on the delivery note, and report it against the packing list line rather than in an email body weeks later. Ask the supplier beforehand how they want claims documented and what evidence they need; a pre-agreed process turns a disputed claim into a replacement panel.
The questions to send with your enquiry
- Which defects on a high gloss veneer surface are covered, and which are excluded as site damage or misuse?
- Can a matched replacement door or panel be produced from my approved sample and batch reference later?
- Who installs on site, who signs off the snag list, and who covers a second visit for re-scribing?
- What hinge, slide and track brands are used, and can I buy those spares by part number in future years?
- How is a claim raised after handover, and what does the stated response time actually commit to?
- Are written care and cleaning instructions issued as part of the project handover documentation?
Related wardrobe options from the same collection
If gloss is being specified for a bedroom with strong daylight, compare it against lower-sheen alternatives in the wood veneer range before you commit. Matte Finish Veneer Wardrobes and Walnut Veneer Wardrobes are made to the same project-specific sizing approach, with finish, layout and dimensions specified per space. Lower sheen does not remove the need for the after-sales terms above, but it changes what shows up first: a matte veneer reads dust and surface marks rather than fingerprints and reflections.
What to do before you sign the order
Keep the paperwork thin and specific. One approved finish sample, one set of shop drawings with door swings and scribed edges marked, one quotation that names the hardware, and one paragraph of warranty terms attached to it. A buyer who has those four items can resolve almost every dispute that later arises over a glossy wardrobe, because each question above has a written answer already on file.
Dimensions, finishes and after-sales terms for made-to-measure wardrobes are confirmed per project. Ask for them in writing on your quotation before production is released.