A round mirror cabinet looks simple on a drawing. It is a circle, a door, some storage behind it. That apparent simplicity is exactly why sample approval matters more for this item than for most others in the bathroom package. A wrong finish on a rectilinear vanity can be argued away as a design choice; a wrong finish on a round cabinet reads as a mistake, because there are no straight edges to hide an inconsistency behind. This guide walks through the sample process we follow for the Santerson Round Mirror Cabinet, stage by stage, so that procurement teams, contractors and designers know what to request, what to compare, and what to sign off before production starts.
Why the round format exposes finish errors
Our round mirror cabinet is a configurable item for residential bathroom projects: dimensions, layout, material and finish are all specified per project rather than fixed to a catalogue size. Two properties of that specification drive the sample process.
First, curvature. A door with a radius shows grain direction, sheen variation and edge banding far more clearly than a flat panel. A wood-effect laminate that looks acceptable on a sample offcut can look wrong once wrapped around a curve, because the grain runs across the arc instead of down it. Second, the mirror itself acts as a reference surface. Whatever sits beside the glass — frame colour, hardware finish, the wall behind — is reflected and compared at close range, under bathroom lighting, several times a day. A metallic frame that photographs well can look dull or overly warm next to the specific mirror glass and handle combination chosen for the job.
For these reasons we treat the round cabinet as an item where physical approval is worth the extra week in the programme, not something to be signed off from a photograph on a screen.
What a finish sample actually covers
A "sample" for this product is not one object. It is a small set of physical references that together describe the finished cabinet. When you request samples, ask for each of these separately, because they come from different production stages and can be approved or rejected independently.
- Body panel sample. The substrate plus its surface treatment — the colour, texture and sheen of the carcass and door faces. This is where wood grain direction, matte versus gloss depth and edge-matching are judged.
- Frame or profile sample. If the specification includes a metal or coated frame around the mirror, request a length of the actual profile, not a flat swatch of the coating. The bend and the corner joint are where quality is visible.
- Mirror glass sample. Glass varies in tint, edge colour and reflectivity. A small offcut with a polished edge lets you check whether the glass casts a green or neutral tone at the rim, which matters most on a round edge where the whole perimeter is visible.
- Hardware sample. Hinges, handles, stays and any internal fittings, as physical pieces. Finish names such as brushed nickel or matte black cover a wide range of actual tones across suppliers.
- Lighting sample (LED configurations only). Where the design calls for integrated lighting, confirm the light output and colour temperature against your own specification before production. We list this as a project-by-project confirmation item rather than a fixed catalogue figure, so put your required value in writing on the enquiry.
Step 1 — Lock the drawing before requesting samples
Samples produced against an unsettled drawing are wasted. Before anything is cut, we ask for a confirmed elevation showing overall diameter, mounting height, door swing direction, and whether the unit sits above a basin or beside it. That last point changes the internal layout and the position of any electrical connection.
Send us the same drawing you will use on site, with your project reference and the room name. If the round cabinet is one item in a wider bathroom package that also includes vanities, basins or tall storage from the same supplier, tell us which items share a finish. We then produce those samples as a matched set from the same production run, so the tones are genuinely comparable rather than close.
Step 2 — Decide how many variants you need
Multi-unit projects usually have more than one bathroom. Where two or more rooms share a finish code, order one sample set per distinct finish code, not per room. Where the design uses different sizes of the same round cabinet across rooms, one finish set is sufficient — but confirm that all sizes will be produced in the same batch so sheen and colour stay consistent.
If your project mixes mirror cabinet types — a round unit in the guest bathroom, a tall mirror cabinet in the main bathroom — request samples for both and place them side by side. Different formats often use different frame profiles, and a finish that works on one can look heavier or lighter on another.
Step 3 — Review samples under real conditions
This is the step most often skipped, and it causes most of the disputes. Judge the samples in the environment where the cabinet will be installed, or as close to it as you can get.
| Check | How to do it properly |
|---|---|
| Colour under actual lighting | View the sample in daylight and with the bathroom's own light source switched on. Warm downlights and cool LED panels shift apparent colour substantially. |
| Grain direction on the curve | Rotate the panel sample and look at how the grain runs. On a round door, note where the figure will sit when the door is closed and centred. |
| Sheen consistency | Tilt the sample through the light. A matte finish should not show bright streaks; a gloss finish should not show orange-peel texture at the edge. |
| Edge banding and radius | Run a fingernail along the edge joint. Gaps, raised adhesive lines and colour mismatch between face and edge are the common defects on curved work. |
| Glass rim tone | Stand the glass offcut against a white surface and look at the polished edge. Decide whether that rim tone is acceptable against the mirror perimeter. |
| Hardware against body | Hold the handle or frame piece against the body panel in the same light. Compare them as a pair, never separately. |
Step 4 — Record what you approve
Verbal approval is where projects lose their leverage. When you sign off, mark each physical sample with the project reference, finish code, room name and date, then send us a signed approval sheet naming exactly which samples were accepted. We keep those approved references against your order and produce to them.
Two practical details save trouble. First, keep one full set of approved samples yourself as the site reference for handover inspection — do not return everything. Second, note on the sheet anything you explicitly did not approve, such as an alternative handle offered during review.
Where sampling fits in our process. Sample approval sits inside the confirmation stage of our workflow — brief and design proposal, then quotation and detail confirmation, then production and shipment. For bathroom fixtures supplied alongside other fit-out items, see our interior fixtures range and the custom furniture manufacturer service, where bespoke finishes and prototyping are handled as part of the same confirmation step.
Step 5 — Pre-shipment inspection against the approved sample
Because you hold the approved physical sample, incoming inspection becomes objective rather than a matter of opinion. Check the delivered unit against the retained sample under the same lighting you used at approval. Confirm door alignment on the round face, that the mirror perimeter is free of chips, and that hardware finish matches the piece you signed off.
For projects where we handle delivery and installation support, this comparison is also the basis of the snag list at handover. Photograph any deviation next to the sample rather than describing it in words; a side-by-side image resolves most queries on the spot.
A short checklist for your next enquiry
- Confirmed elevation with diameter, mounting height and door swing
- Finish codes shared with other bathroom items in the package
- One sample set per distinct finish code, not per room
- Separate samples for body, frame, glass, hardware and — where specified — lighting output
- Review conducted under the actual bathroom light source
- Signed approval sheet naming accepted samples; one set retained on site
- Incoming inspection compared against that retained set
The extra week spent on sample review is inexpensive measured against re-producing a curved door or replacing an installed unit. If you are specifying the round format for several bathrooms, send us the schedule and we will tell you which finish codes can share one sample set and which need their own.
Send your drawings and finish schedule to SANTERSON to arrange a sample set before production is scheduled.