Parquet is having a quiet comeback in Australian villas, boutique hotels and renovated apartments, and European oak parquet engineered hardwood flooring is one of the lines buyers keep asking us about. Before any order goes into production, though, there is a short list of things worth confirming - top-layer thickness, board format, fixing method, subfloor condition and the paperwork that gets the goods through customs. This article walks through each item using our European Oak Parquet Engineered Hardwood Flooring as the worked example.

Why parquet keeps appearing in Australian project briefs

Parquet patterns - herringbone, chevron, brick-set blocks and square panels - carry a lot of visual information in a small area. On a villa entry hall, a hotel corridor or an open-plan living room, they give the floor a sense of craft that a plain plank run does not, while still reading as warm timber rather than tile or vinyl.

Australian clients often specify parquet alongside other finishes we supply on the same project: engineered wood flooring in the bedrooms, wall panelling and cladding, joinery and custom cabinetry. Sourcing those items from one one-stop furniture and building materials supplier reduces the number of separate suppliers a site team has to coordinate, which is usually where schedule slippage comes from.

What this specific product actually offers

The product record for our 1848 line states three things plainly, and it is worth quoting them rather than dressing them up:

  • A 3 mm solid oak wear layer over a multi-layer engineered base.
  • A multi-layer construction described as stable, helping resist deformation as humidity changes.
  • A classic parquet layout with warm, natural European oak grain, listed as suitable for home renovation and compatible with underfloor heating.

That is the marketing description, not a laboratory test report. Two of those points - the 3 mm top layer and the underfloor-heating compatibility - are exactly what an Australian buyer should put in writing on the purchase order, because both drive installation decisions later. If your project needs a specific overall board thickness, a particular surface treatment or a written statement about use over a hydronic system, ask for it to be confirmed against the production specification before the order is placed, not after.

A practical rule: if a number matters to your install crew or your certifier, get it from the factory's specification sheet in writing. Do not rely on a product page paragraph.

Six things to verify before you place the order

1. Wear layer and how much sanding you may ever need

A 3 mm solid oak top layer is a real timber surface, not a printed film. What matters commercially is whether that thickness suits the life you expect from the floor and whether the factory will state any refinishing allowance for the finish they are applying. Ask the question directly and record the answer.

2. Board format, module size and pattern direction

Parquet is sold as individual blocks, as small modules or as larger engineered panels with the pattern applied on top. These behave differently on site and they take up different amounts of material once you allow for cuts. Confirm the exact module dimensions, the thickness of each layer, and which direction the pattern runs - then lay out a setting-out drawing before ordering, so your cutting loss is planned rather than discovered.

3. Surface finish and grade

European oak varies noticeably in colour and grain from board to board, and that variation is part of what you are buying. Confirm the finish type (oiled, lacquered or UV-cured), whether knots and mineral marks are included or excluded, and how wide a colour range the selected grade covers. Request the same batch for one continuous area, and keep a few spare boards from that batch on site for later repairs.

4. Fixing method and subfloor preparation

Engineered parquet is normally glued down or floated, depending on format and site conditions. Before the containers ship, settle three things with your installer: the adhesive type, the acceptable moisture content of the screed or substrate, and the flatness tolerance they will work to. Australian slabs, timber subfloors and raised floors each behave differently, and no overseas supplier can assess yours from a drawing alone. Get the preparation requirements in writing and hand them to the site team as part of the delivery pack.

5. Underfloor heating compatibility, in writing

The product description lists this floor as compatible with underfloor heating. For a project that relies on it, ask for the operating limits the factory applies - maximum surface temperature and the ramp-up procedure - and confirm which fixing method they recommend over a heated substrate. Then have your installer follow that procedure rather than the usual habit of their trade.

6. Import paperwork and delivered terms

Flooring arrives with the rest of the fit-out, so the documents need to arrive in step as well. Our logistics service covers freight by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery, including commercial invoices, packing lists and certificates of origin. For an Australian consignee, confirm the Incoterms you are buying on, who is acting as importer of record, and the duty and GST position for your specific consignment before goods depart - our team arranges the shipping documents, but the local assessment sits with your customs broker.

How a flooring order normally runs

StageWhat happensWho signs it off
SpecificationModule size, grade, finish and wear layer agreed against the project schedule of finishes.Architect / buyer
Sample approvalPhysical boards reviewed under site lighting, with the approved sample retained as the reference.Client / site team
ProductionBoards produced and packed for the agreed container plan; quantities reconciled against the setting-out drawing.Factory QC
Freight and clearanceBooking, documents, tracking, customs clearance and delivery to site or store.Buyer / broker
Acclimatisation and layingSubfloor tested and prepared, adhesive applied, pattern laid to the setting-out plan.Installer
HandoverSnag list closed out, spare boards stored, care routine handed to the building operator.Client

Two of these stages cause almost every dispute we see on flooring orders: approving a sample under showroom lighting instead of site lighting, and laying over a subfloor that was never moisture-tested. Both are cheap to get right and expensive to unwind.

A short verification checklist

  • Written confirmation of the 3 mm wear layer, total thickness and layer build-up.
  • Selected grade, colour range and surface finish recorded on the order.
  • Module dimensions plus a setting-out drawing with cutting allowance agreed.
  • Fixing method, adhesive and subfloor moisture limits issued to the installer.
  • Underfloor-heating operating limits confirmed by the factory if heating is present.
  • Incoterms, importer of record, documents and delivery address agreed before shipping.
  • Spare boards from the same batch held on site for future repairs.

Ordering alongside the rest of the fit-out

Floors rarely sit alone in a scope. On the villa and hospitality projects we work on, flooring is usually ordered together with wall finishes, joinery and interior fixtures - for example custom built-in kitchen cabinets or stone and marble surfaces - so the thresholds, transitions and reveal heights have to be resolved once, across all three trades, instead of three times. Where a project needs bespoke sizes or a non-standard pattern layout, our custom and OEM service covers material and finish selection from an approved specification.

Send us your flooring schedule

Share the room list, module format and substrate details for your Australian project and we will confirm what we can produce, how it ships and what your site team needs to prepare before laying.

Contact SANTERSON - attention PHILLIP. Our turnkey project solutions cover design coordination, production and door-to-door delivery.

Product specifications quoted above are taken from the SANTERSON product page for this line. Request a current written specification and a physical sample before placing an order; substrate preparation, local installation standards and import assessments remain the responsibility of the site team and their broker.