A freestanding open wardrobe looks simple on a mood board: no doors, no hardware, nothing to hide. That is exactly why it fails quietly on site when the submittal package is thin. With no door leaf to define the opening, the carcass itself becomes the visible product, and every dimension, edge and finish has to be agreed in writing before production starts. Below is the package we ask project buyers, contractors and designers to review line by line when they specify Freestanding Open Wardrobes for a villa or apartment bedroom.
Why the submittal matters more for an open wardrobe than a closed one
For a hinged or sliding door wardrobe, the reviewer checks the front elevation and the door specification, and the carcass is largely accepted as standard. Remove the doors and three things change at once:
- The structure becomes the finish. Side panels, top rails, shelf edges and hanging-rail fixings are all in the eye line of the user, so edge banding, grain direction and panel thickness have to be shown, not assumed.
- Tolerance is exposed. A door can absorb a 5 mm out-of-plumb wall. An open unit cannot, unless the submittal states how the unit is scribed, packed or aligned on site.
- Dust and load become questions. Open shelving and hanging bays need a stated load assumption for heavy winter garments, plus guidance on shelf spans and rail spacing, otherwise installers improvise.
Section 1: project identification and scope of supply
Start the submittal with a cover sheet that leaves no ambiguity about what is being bought. For wardrobes supplied as part of a wider fit-out, this sheet also prevents double counting against built-in furniture packages elsewhere in the schedule.
| Item | What to record |
|---|---|
| Project and location | Project name, building, level, room or unit number, and the drawing revision the wardrobe was taken from. |
| Room-by-room schedule | Every wardrobe position on one table: type, width, height, depth, finish code, quantity. |
| Scope boundary | What is included (carcass, shelves, hanging rails, drawers, backing) and what is not (lighting, wall scribing, skirting cuts, flooring transitions). |
| Responsible parties | Specifier, main contractor, site trades, and who signs off the final shop drawing. |
Section 2: dimensions and clearances
Our open wardrobe units are made-to-measure, so the submittal must show the design dimension and the site-available dimension side by side. A single combined figure is where most rework claims begin.
- Design versus site-verified size. State which number governs production, and who confirmed it on site after finishes were installed.
- Ceiling and floor conditions. Note whether the unit runs to the finished ceiling or stops below it, and how a suspended ceiling, cornice or skirting is handled.
- Door and circulation clearance. Confirm the bedroom door swing and walkway still work with the wardrobe front fully open — an open unit has no door to close, but its contents project into the room.
- Internal zoning heights. Short-hang, long-hang and shelf zones with clear internal heights, so a client cannot be handed a 2.6 m rail that nothing on site can reach.
Section 3: materials, finishes and substrates
List the substrate and surface for every visible component separately. A line that reads "white wardrobe" is not a specification; a line that names the panel type, the surface material and the finish code can be checked on delivery.
| Component | Typical options to confirm |
|---|---|
| Carcass panels | Panel type and thickness, surface (melamine, lacquer, veneer), two-sided finish where the unit is room-dividing. |
| Shelves | Same or contrasting surface, edge treatment on all four sides, adjustable or fixed, span and support method. |
| Hanging rails | Rail material and diameter, bracket type, whether the rail is topped by a shelf that reduces usable depth. |
| Drawers and inserts | Drawer box finish, runner type and extension, pull-out hampers or trays if specified. |
| Backing | Backing thickness, colour, fixings, and whether it is visible from an adjacent space. |
Where the design calls for a specific look rather than a material, say so plainly. A Wood Tone Open Wardrobe and a veneered unit can photograph identically and age very differently; the submittal is where the difference gets priced and recorded. The same applies to frames: a Metal Frame Open Wardrobe needs its profile section, tube size and coating stated, because those details decide whether the frame can carry the shelf loads shown on the drawing.
Section 4: structural and fixing details
Freestanding units are often assumed to need no fixing detail. In a project they do, and the submittal should show it before anyone drills.
- Annotated elevation with overall width, height, depth and the position of vertical joints between modules.
- Wall-fixing or anti-tip restraint detail, including the fixing centres and the wall build-up they bite into. Where a wall cannot accept fixings, state the alternative restraint being proposed.
- Levelling method for uneven slabs, and whether a plinth, adjustable feet or a scribed filler is used.
- Panel joint and cam-fixing detail at the visible seam between two modules, since an open unit shows that join from the front.
Section 5: accessories and integration
Anything a client will touch or see belongs in the package with a model, quantity and finish: soft-close drawers, trouser and jewellery trays, mirror panels, integrated lighting, display niches. For lighting, state the fitting type, switching, cable route and who provides power — an open wardrobe with a rail light that has no cable path is a snag waiting for handover.
If the same bedroom also contains Minimalist Open Wardrobes, wall-mounted open shelving or a vanity run, put all of them on one finish schedule so the surfaces match across the room instead of being ordered from separate submittals.
Section 6: samples, approvals and sign-off
- Physical sample board for every specified surface, signed and dated by the approver.
- Shop drawing set: elevations, plan, sections, internal zoning, fixing details.
- Written approval record naming who approved, what revision was approved, and the date.
- Change log for any dimension or finish change after approval, with the cost and lead-time impact noted.
Section 7: packing, delivery and installation information
A complete submittal ends with the practical data that protects goods on site: packed dimensions and weight per module, panel protection method, floor-protection requirements, delivery window and access route, plus an installation sequence and a snag list template for handover. Where wardrobes ship internationally with the rest of the fit-out, keep them in the same shipment documentation set as the other joinery so quantities can be reconciled against one container list.
A short test before you approve: could a site foreman install this wardrobe correctly using only the submittal, with no message to the factory? If not, the missing answer belongs in the document, not in a WhatsApp thread.
FAQs
Is a freestanding open wardrobe cheaper to specify than a fitted one?
The unit may be, but the submittal should price the extras that make it work: scribing to an out-of-plumb wall, anti-tip restraint, edge finishing on exposed sides and any lighting. Compare packages, not unit prices.
What is the single most common cause of rework?
A height taken before the finished floor and ceiling levels were fixed. Record the design dimension and the site-verified dimension separately, and state which one governs.
Can open wardrobes be part of a whole-bedroom package?
Yes. Specifying them together with the cabinetry, wall panelling and lighting under one one-stop furniture and building materials scope keeps finishes, tolerances and delivery on a single schedule.
If you are preparing a wardrobe submittal for a villa or apartment project, send us the room schedule and the drawing revision and we will return shop drawings, finish samples and a component-by-component specification for review. Contact SANTERSON to start the submittal.