An integrated countertop vanity looks simple on a render and complicated on site. The unit, the worktop, the basin, the waste, the mirror light and the wall finish all arrive from different places and have to meet at one line. This guide walks through how we take a Santerson Integrated Countertop Vanity from a marked-up drawing sheet to an installed piece that matches what the architect actually drew.

Why the integrated countertop vanity is the hardest bathroom item to coordinate

A freestanding cabinet can be corrected on site. A vanity where the countertop and basin are built as one piece cannot. Once the stone or engineered surface is cut and the basin formed into it, the fall to the waste, the position of the tap holes and the depth of the bowl are fixed forever.

That single fact drives everything below. In villa and hospitality bathrooms we have supplied across Australia and elsewhere, the coordination problems that show up late are almost never about the cabinet carcass. They are about interfaces: where the counter meets a tiled return, whether the waste outlet clears the trap position already set in the slab, whether the mirror light is centred on the basin or on the drawer bank.

Because our vanities are made to measure rather than offered in fixed widths, finish, layout and dimensions are specified per project. That flexibility is useful, but it puts the responsibility for accuracy squarely on the drawing set. A wrong number does not get corrected by choosing a different size off a shelf.

What we need from your drawings before production starts

The list below is what our production team works from. If any line is missing, we ask for it before cutting anything.

Drawing inputWhy it matters
Room set-out with finished wall facesOverall vanity width is measured to finished surfaces, not structural walls. Tile and plasterboard build-up changes the number.
Floor level and threshold heightsDetermines whether a floor-standing or wall-hung floating vanity sits correctly under the window sill or mirror.
Sanitary waste and water supply positionsThe basin bowl, its fall and the outlet must line up with the pipework already set in the floor or wall.
Electrical outlet and light point locationsSets where the mirror cabinet, vanity lighting and any socket are fixed relative to the tap.
Door swing and drawer clearance zoneA drawer or door that fouls the WC or the entry door is a site problem, not a factory one.
Adjacent material scheduleStone, tile and timber returns need to be dimensioned together so edges and mitres are cut in the factory, not on site.
Finish and hardware sample approvalLacquer, veneer, laminate and metal finishes are matched to the approved sample, which has to be signed off before the order enters production.

A note on how we read your pack

We work from architectural and joinery drawings, 3D visualisations when you have them, and a written specification. Where the drawing and the specification disagree, we flag it in writing and wait for a reply rather than deciding for you. That single habit removes most of the arguments that would otherwise happen after delivery.

Matching the vanity to site conditions

Drawings describe an ideal room. Site conditions are messier, and the following checks should be done on site before the order is released.

  • Verify sizes on site, not from the plan. Take tape measurements of the finished opening at three heights and three depths, and record them against the drawing dimension. Older villas and renovated properties rarely give square, plumb walls.
  • Confirm the waste before the worktop is cut. For an undermount basin, the cut-out and the bowl position are decided together with the fall. Once formed, that geometry cannot be revised.
  • Check substrate and fixing points for wall-hung units. A floating vanity needs solid blocking behind the lining. Confirm what is inside the wall before the tile goes on.
  • Agree who supplies what. Tapware, traps, mirror lights and sealants are often excluded from the vanity order. Fix that split in writing so nobody arrives expecting someone else to bring it.
  • Protect the finish through the building works. Stone surfaces and lacquered fronts get damaged by painters and tilers afterwards. Plan storage or wrapping into the site programme.

How a single supplier simplifies the interface problem

When the cabinet, worktop, basin and mirror unit come from four vendors, each one is correct in isolation and the failure sits in the gap between them. Coordinating those items through our interior design and project coordination service means one team holds the dimension that matters: the finished top line of the counter, the basin centre and the tap set-out.

SANTERSON works as a China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects. Our service covers design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then delivery and handover. For bathroom fit-outs that means the vanity, stone and marble surfaces, ceramics, shower systems, lighting and cabinetry can be specified against one drawing set instead of several.

Our custom and OEM service covers bespoke finishes, textures and dimensions, with 3D modelling and prototyping where a project needs a mock-up before the full order. Where a project has several identical bathroom types, that also means one approved sample governs every unit rather than each batch being interpreted separately.

A coordination timeline you can put in your programme

StageWhat happensWho signs off
1. Brief and drawing reviewWe read the architectural pack, list missing information and issue queries in writing.Architect / client
2. Site verificationOpenings, waste positions, levels and substrates checked on site against the drawings.Builder / site supervisor
3. Shop drawing issueDimensioned vanity drawings with basin centre, tap set-out, waste position, drawer layout and finish callouts.Client / designer approval
4. Sample approvalFinish and material sample signed off; production does not start before this.Client
5. Production and QCManufacturing with inspection against the approved shop drawing.Factory QC
6. Packing and shippingPackaging, container loading, freight by sea, air or rail, customs paperwork and tracking through to door-to-door delivery.Logistics coordinator
7. Delivery inspection and installationGoods checked against the packing list on arrival; installation guidance, snag inspection and handover.Site team / our support

Three questions to answer before you release a vanity order

  • Is the shop drawing signed, with the basin centre and tap set-out dimensioned from a fixed wall face?
  • Has the waste position in the floor or wall been confirmed against that drawing, not the original design intent?
  • Is the finish sample physically approved and retained on site for reference during handover?

Related items in the same bathroom package

Bathrooms rarely fail on one item; they fail on the set. Where a project needs more than one basin per counter, a double vanity has to solve two wastes, two tap sets and a mirror light that reads centred across the whole run — a different drawing from a single unit. A single vanity in a smaller guest bathroom still needs the same waste and clearance checks at a tighter scale.

Storage decisions follow the same logic. Mirror cabinets, tall storage units and integrated lighting should be dimensioned against the vanity drawing so that reveals, door swings and light positions are consistent across the room rather than set out separately by different trades.

Common coordination failures and how to avoid them

  • Counter overhang clashes with the WC. Fix the overhang dimension on the shop drawing, checked against the actual WC position after tiling.
  • Tap holes drilled for the wrong tapware. Confirm the exact tap model and its spout reach before the worktop is formed; a change afterwards may not be recoverable.
  • Mirror light off-centre. Set out lighting from the basin centre, not the middle of the wall, and mark it before the lining goes up.
  • Drawer fronts inconsistent between rooms. Approve one finish sample per bathroom type and keep it on site for comparison at handover.
  • Delays caused by missing information. Issue all queries in one written round rather than piecemeal during production.

Getting an accurate quotation

Send the room drawings, the finish preference and the confirmed waste and supply positions, and we will come back with a quotation that reflects what can actually be built and installed rather than an estimate based on a plan view. Where information is still open, we say so on the quotation instead of assuming a figure.

Talk to us about your bathroom package

Send drawings and site conditions for your villa, hotel or apartment project and we will review them against our vanity specifications before production. Contact PHILLIP on +86-13928214007 (phone/WhatsApp), email santerson@qq.com, or use the form on our contact page.

Enquiries are answered Monday to Saturday, 8:00 AM to 6:00 PM (GMT+8).

Specifications, dimensions, finishes and delivery arrangements are confirmed project by project. Figures on drawings are not fixed product sizes; final details are agreed in writing before production.