A quote for custom minimalist kitchen cabinets for a home renovation is only as accurate as the information behind it. Because handleless fronts, flat panels and integrated appliances leave no room to hide uneven walls or improvised dimensions, small gaps in your drawings turn into change orders later. Below is the checklist we work from when we price cabinetry, so you can send one complete enquiry and receive a comparable, itemised quotation instead of a rough estimate.
1. The shell: accurate room dimensions
Send measured drawings rather than a photograph of a floor plan. For every wall we need the length and finished floor height, plus the position of doors, windows, skirting and any structural column. Minimalist runs usually sit flush to the wall with no scribe gap, so out-of-plumb walls and slab levels decide whether panels are cut to size on site or made to a fixed module.
- A dimensioned floor plan and two elevation drawings, in millimetres, showing finished floor and finished ceiling levels.
- Window sill heights and reveal depths, because wall units and worktops must clear them.
- Notes on what stays and what is demolished — an existing run you intend to keep changes the layout completely.
If your renovation is still at concept stage, a sketch with rough measurements is enough for a budgetary figure. We will mark which numbers must be re-verified on site before production starts.
2. The layout and how you actually use the kitchen
Tell us the working triangle — sink, hob and refrigerator — and which units carry the most weight in daily use. A clean look is achieved by moving storage into tall cabinets and deep drawers rather than reducing storage. Specify what you want concealed and what you want on open display.
- Appliance list with model numbers or cut-out dimensions: built-in oven, steam oven, dishwasher, refrigerator, wine cooler, hob extract.
- Internal fittings per cabinet — drawer stacks, pantry shelving, pull-out corners, spice and bottle units, integrated bins.
- Worktop material and edge detail, plus whether the splashback matches the worktop or is a separate panel.
- Island or breakfast bar dimensions and seating overhang, including where services need to be routed.
If you have no layout yet, our interior design service covers space planning and 3D renderings before anything is cut. That stage settles the drawing set that a quotation is finally based on.
3. Door style, finish and handle strategy
Minimalist cabinetry looks simple but hides several distinct build details, and each one has a price. State which of these you want so the quote is not an average of all three.
- Recessed channel handle, surface-mounted profile handle, or touch-to-open mechanism — handleless minimalist kitchen cabinets rely on the opening method rather than visible ironmongery.
- Matte solid colour, wood-grain texture or a two-tone combination of the two, and whether doors run floor to ceiling without a top valance.
- Panel material and surface — matte lacquer, acrylic, melamine, veneer or PVC-wrapped — with a note on which rooms need a wipe-clean, wear-resistant face.
- Mitred or ABS edge banding, and whether the carcass colour matches the door.
Where colour matters, give us a RAL reference or send a physical sample. Matte finishes read differently under warm and cool lighting, and a screen-calibrated swatch is not a reliable basis for approval.
4. Hardware, load and usage expectations
Handleless kitchens are opened far more often than decorated ones, so ironmongery is where quality shows first. Specify soft-close hinges and drawer runners as a requirement rather than an assumption, and tell us the intended load per drawer — heavy plates and pans behave differently from dry goods.
- Soft-close hardware on all doors and drawers, plus integrated cabinet lighting for interiors and under-cabinet strips.
- Support legs, plinth detail and toe-kick height, or a fully recessed base if the run should appear to float.
- Matching hinges, slide rails, brackets and handles supplied with the cabinetry, so nothing is sourced separately on site.
Our custom and OEM service covers bespoke finishes, prototyping and flexible order quantities, which matters when a renovation needs one tall unit in a matching veneer rather than a full second set.
5. Site conditions that affect delivery and installation
Cabinetry is flat-packed, panelled and heavy. Access determines whether full-height pantry doors can be carried in intact or must be built up on site.
- Lift dimensions, stair widths, turning landings and the distance from the kerb to the kitchen door.
- The trade sequence: where plastering, tiling, flooring and electrical first-fix will sit relative to cabinet installation.
- Who installs — your own fitter, or a coordinated crew. We provide installation and after-sales support, including inspection and snag lists, when the site is ready for it.
- Delivery address, delivery window and whether goods must be staged across several floors or units.
For overseas addresses, add local import requirements so paperwork travels with the shipment. Freight by sea, air or rail, customs documentation and door-to-door delivery are arranged through our logistics service; duties and transit terms are confirmed per project rather than quoted as a fixed figure.
6. Budget range, quantities and schedule
A target budget lets us propose the right specification instead of the most expensive one. State your ceiling for cabinetry and worktops separately from appliances and wet trades.
- Number of kitchens or units in the project, and whether later phases will repeat the same specification.
- The date drawings must be approved and the date goods are needed on site, working back from your renovation programme.
- Whether you want one consolidated delivery or staged deliveries by trade.
Single-home renovations, apartment updates and multi-unit projects all draw on the same custom kitchen cabinetry range; only the quantities and phasing change.
What a proper quotation should return
- A unit-by-unit schedule with dimensions, door style, finish and hardware listed against each item.
- Worktop, plinth, panels and fillers shown separately, not buried in a lump sum.
- Drawings or elevations attached for your sign-off before production.
- Packaging, freight terms, lead time to despatch and what is excluded.
Send one complete enquiry
Assemble your drawings, appliance list, finish choices and site notes, and send them together. A single complete brief produces a firm, comparable quotation for custom minimalist kitchen cabinets, and it is the same brief we use across villa and apartment projects delivered through our turnkey project service.
Talk to PHILLIP about your kitchen renovation — WhatsApp +86-13928214007, email santerson@qq.com.