A concealed door is only as good as the wall it disappears into. Before you place a purchase order, here are the after-sales questions that decide whether a hidden doorway stays flush and quiet for years — or becomes a snag list.
Most buyers specify a Santerson Decorative Concealed Door because of how it looks on the finished wall: no visible frame line, no casing to interrupt the paneling, and a leaf that can carry the same finish as the surrounding surface. That is exactly why the after-sales conversation matters more here than with an ordinary hinged door. A concealed door sits inside a wall build-up — framing, board, plaster or cladding, paint or veneer — so any correction later means opening up a finished surface, not simply swapping a leaf on hinges.
The questions below are the ones worth putting in writing before production starts. They apply whether you are buying a handful of doors for a villa or standardising openings across an apartment or hotel package.
1. Who sets out the opening, and against which drawing?
Concealed doors fail on site far more often because of the opening than because of the leaf. Ask your supplier which party is responsible for setting out the rough opening, and at what stage that information is exchanged.
- Request dimensioned shop drawings showing leaf size, hinge positions, the position of the invisible frame relative to the wall face, and the floor clearance assumed for the finished level.
- Confirm which side the leaf swings and whether the opening allowance accounts for the floor build-up you actually intend to install — screed, adhesive, tile or engineered boards all change the gap.
- Ask what happens if the on-site opening deviates from the drawing: is there a site survey step, an adjustment allowance, or a re-manufacture route with a stated cost and lead time?
2. What exactly is covered after handover?
Warranty language on a quotation is often one sentence long. Break it into the parts that actually matter for a concealed door, and get each answered separately.
- Scope: does the warranty cover the leaf, the concealed frame, the hidden hinges, the magnetic lock or push-open hardware, and the adjustment of all of them — or only the panel itself?
- Duration: how long each component is covered for, since hinges and seals typically carry different terms from the door leaf.
- Exclusions: ask directly whether cracking in the wall finish around the frame, movement caused by building settlement or moisture in a wet-area wall void are excluded. These are the most common concealed-door complaints.
- Claim route: who do you contact, in what format, and who pays for shipping of replacement parts?
3. Can spare parts be reordered years later?
Hardware in a concealed door is hidden by design, which means it cannot be matched at a local hardware shop when it wears out. Two questions protect you on multi-phase projects:
- Are the hinges, magnetic lock, push-open mechanism and adjustment keys standard catalogue items, or specific to the batch you bought?
- If phase two of a project is ordered eighteen months later, will the same hardware and finish reference still be available, and can leaf dimensions be re-cut to the same shop drawings?
For larger packages, ask for a spare-parts kit with the original shipment — typically spare hinges, one set of ironmongery per door type, and adjustment tools. It costs little at the point of manufacture and removes the awkward conversation when something fails after handover.
4. Who installs it, and who fixes it if the fit is wrong?
A concealed door leaf that arrives perfectly flat can still hang badly if the frame was set out of plumb. Decide in advance which side owns that risk.
- If your own trades install the doors, ask for written fixing instructions and a tolerance range for frame alignment, so you know where supplier responsibility ends.
- If installation is supplied as part of the package — SANTERSON lists installation and after-sales support among its project services — ask what the install fee includes: frame setting, leaf hanging, adjustment, seal and finish touch-up, or only assembly.
- Ask whether a snag list is signed off at completion, and how outstanding items are closed out afterwards.
5. What happens if one door arrives damaged?
Doors travel badly. Corners chip, and a concealed leaf with a finish already matched to your wall paneling cannot simply be patched on site.
- Agree the reporting window in days, and the photographic evidence expected, before shipping — not after a crate lands damaged.
- Ask whether a replacement leaf is re-manufactured or held as stock, and what lead time you should plan for on a single replacement versus a full opening set.
- Confirm how freight and insurance are handled for the replacement under your agreed delivery terms.
6. How are finish and colour corrections handled?
Decorative concealed doors are specified precisely because they take the wall finish. When a sample differs from the delivered batch, that difference is visible across an entire elevation.
- Ask for a physical finish sample to approve before production, and keep it — it becomes your reference in any later dispute.
- Confirm whether the approved sample is retained on the supplier's side as the standard for that order.
- Check how batch consistency is handled if doors are produced across more than one run, particularly for painted and lacquered surfaces.
How to compare suppliers on after-sales terms
Buyers often collect prices in a spreadsheet and leave service terms as free text. Turning them into columns forces comparable answers out of every quotation.
| Question to ask | Why it matters |
|---|---|
| Which party sets out the opening, and are shop drawings provided? | Most concealed-door faults originate in the wall build-up, not the leaf. |
| Warranty scope split by leaf, frame, hinges, ironmongery | Hidden hardware cannot be replaced off-the-shelf. |
| Spare parts availability and reorder lead time | Protects phase-two and multi-year projects. |
| Who installs, and what does the fee cover? | Defines where supplier responsibility ends. |
| Damage reporting window and replacement route | A finished leaf cannot be repaired on site. |
| Approved finish sample retained as reference | Settles colour disputes without re-making whole elevations. |
Where the doors themselves come from
SANTERSON manufactures concealed and flush doors as made-to-measure items, with sizing, layout and finish specified per opening. The range also covers handleless concealed doors and flush wall aligned doors, which is useful when a project needs one consistent wall treatment across different opening types. Because the company supplies furniture and building materials under one procurement package, door schedules can be coordinated with the joinery, paneling and flooring they sit against — which reduces the number of trades arguing over tolerances on site.
Material choices, hardware brands and finish systems are confirmed per project rather than published as fixed specifications, so treat everything above as a list to verify in writing during the quotation stage.
Send your door schedule for a written after-sales confirmation
Share opening sizes, swing directions and the wall finish each door sits in, and ask for warranty scope, spare-parts availability and installation terms stated item by item before production begins.
Contact PHILLIP — Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Enquiries: santerson.com/contact
Warranty terms, response arrangements and installation scope vary by project and order; confirm the applicable terms in your contract documents.