A glass open wardrobe looks simple on a mood board: rails, shelves, a transparent front, no doors to swing. It is only when the drawings reach production that the difference shows up. The details below are the ones our project team asks for before a Glass Open Wardrobes goes into manufacturing, and they apply whether you are fitting out one bedroom or a whole villa floor.

1. The dimensions you send decide what can be made

Open wardrobes in our range are made to measure, so the first project detail is the dimensional information itself. A finished opening width, a finished height and the usable depth are what we need — not a nominal room size taken off a floor plan. Note where skirting, architraves, ceiling cornices, downlights, air-conditioning grilles and curtain boxes intrude into the wardrobe zone, because those elements cut into the carcass envelope more often than buyers expect.

Tell us early whether the unit is built in between walls, fitted into a recess, fixed to the wall as a wall mounted open wardrobe, or standing free as a freestanding piece. Each fixing method needs different allowance at the top and sides, and it changes what the wall substrate has to carry.

2. What sits behind the wardrobe matters as much as what sits in front

With no doors, an open wardrobe shows everything around it. A plasterboard wall that reads well behind a closed door can look flat behind glass shelving. On our side we can match carcass and back panels to Wall Panel Systems so the storage runs into the panelling instead of stopping against it, which is the usual reason a project's bedroom joinery looks resolved rather than added on.

Lighting is the second hidden detail. Shelves without a light source go dark once clothes hang in them. If recessed strip lighting is wanted, we need to know at the drawing stage: cable routes, driver position and switching all have to be built into the carcass, not chased in on site.

3. Frame material and glass type set the character

Within the open wardrobe collection, an aluminium-framed unit gives a slim sightline and suits a crisp modern scheme; metal frame open wardrobes read slightly more industrial, while wood tone open wardrobes carry warmth into a bedroom already using veneer or engineered oak flooring. Where the brief asks for glass frontage rather than fully open bays, tinted and textured options behave very differently under light: clear glass keeps a room visually large, frosted and ribbed glass hide the contents, bronze and smoked tints deepen the tone of the frame.

Project conditionDetail to confirm
Small bedroom, single aspect daylightClear glass with a slim aluminium frame; shallow shelf depth
Ensuite or bathroom-adjacent wallFrosted glass and moisture-resistant board for carcass and back panel
Dressing room with display intentRibbed or bronze-tinted glass, integrated shelf lighting, deeper bay
Villa bedroom matching joinery elsewhereWood tone frame matched to wardrobe and door veneers across the floor

4. How the interior will actually be used

Send the hanging mix you want: long hang for dresses and coats, double hang for shirts, drawer height for folded knits, tray depth for accessories. A wardrobe specified from a rendering usually fails here, because the drawing shows an empty box rather than a household's clothing. For apartment and hotel-room work we also check whether luggage has a home in the unit, since that single decision changes the top-shelf height more than anything else.

If the layout is modular rather than one fixed run, say so at quotation stage — open modular wardrobes are configured differently from a single built-in carcass, and the two should not be priced on the same assumption.

5. Surfaces, finishes and the rest of the room

Glass reflects whatever it is next to. A high gloss lacquer beside a mirrored screen multiplies light in a way nobody intended, so we ask which other finishes the wardrobe sits against: High Gloss Lacquer Wardrobes, mirror cabinets, engineered oak flooring or a stone-clad wall. Finish samples are specified together, in the same package, so the tones are compared under the same light rather than discovered on site.

6. Site conditions and the delivery sequence

Glass components and floor levels are a bad combination when measured too late. Confirm finished floor levels, wall flatness and the load capacity of any wall the unit is fixed to before we finalise the drawings. Then fix the order of work: the wardrobe should follow painting, flooring and lighting commissioning, with enough clear path from the lift or entrance to the room for the longest panel. Where a project has several bedroom types repeating, one prototype bay approved on site saves every later floor from the same correction.

Confirm dimensions and selected specifications for each project. Glass type, board specification, frame profile and lighting are agreed in writing before production starts, so nothing is assumed from a photograph.

Sending us the right information

As a China-based furniture and building materials manufacturer working on villa, hotel and office projects, we handle these wardrobes as made-to-measure work under our Custom & OEM Service, alongside the cabinetry, wall panelling, flooring and lighting they sit beside. A complete enquiry usually contains the finished opening dimensions, a fixing method, the hanging mix, the adjacent finishes, and the site programme. With those details we can quote, produce and ship through Logistics & Door-to-Door Delivery, then support installation on site.

Planning a bedroom or dressing room package? Send your drawings and finish schedule to SANTERSON and we will specify the glass, frame and interior layout around them — one supplier, from production through to handover.