A square swim spa that fits a villa terrace, a resort courtyard or a compact garden plot is easy to shortlist and hard to specify. Outdoor Swim Spa WS-PC03 is one model in our configurable outdoor swim and hydrotherapy range, and like the rest of that range it is quoted as a configuration rather than a fixed box. The difference between a spa that performs for years and one that disappoints usually comes down to what the buyer and supplier agreed before production started. This article sets out the specific options worth putting on the table, and the questions we ask project buyers when they specify this model.

Start From What WS-PC03 Ships As Standard

Before discussing customisation it helps to fix the baseline. The catalogue entry for WS-PC03 records a 3000 × 3000 × 1000 mm shell, one control system, one water pump, one filter pump, a jet package of 50 jets including four water columns, one LED light and a total power figure of 2.75 kW, with water jets, LED lighting and ozone listed as the features shown on the page.

  • Model: WS-PC03
  • Catalogue dimensions: 3000 × 3000 × 1000 mm
  • Control system: 1 set
  • Water pump: 1 pc; filter pump: 1 pc
  • Jet total: 50 pcs, including 4 water columns
  • LED lights: 1 pc
  • Total power: 2.75 kW
  • Features shown on the page: water jets, LED lighting, ozone

Two things in that list matter for procurement. First, no swim training system is listed for this model, so if a project needs current-based lap swimming you raise it as an addition rather than assume it is included. Second, the power figure and pump count belong to one particular configuration. Change the jet package, add a heat pump or change the filtration route, and the electrical load changes with it. Treat every number above as a starting point for a quotation, not as a finished specification.

Hydrotherapy And Jet Layout

Jet count on its own tells you very little. Fifty jets arranged around a seating bench behave completely differently from fifty jets concentrated along two lounging stations. When we quote WS-PC03 for a project we ask how the space will actually be used, because that answer drives the layout:

  • Seated massage — jets aimed at the lower back and shoulders of people sitting on the bench, the usual choice for resort terraces and hotel wellness areas where guests soak rather than exercise.
  • Lounging and hydrotherapy — jets positioned along reclining positions, which is what most residential buyers with a single daily user ask for.
  • Water columns — the four water columns in the standard package give a visible, neck-and-back-directed flow. Buyers often ask whether these stay, move or are replaced by air or rotary jets.
  • Jet material and finish — stainless versus ABS faces, colour-matched to the shell, matters in salt-water or heavily chlorinated settings.

Ask for a jet layout drawing with station positions marked against the internal dimensions. A drawing settles arguments that a jet count never resolves.

Filtration And Water Treatment

The catalogue configuration shows one filter pump and ozone as the treatment feature shown on the page. Both are open to discussion, and this is where public-use installations differ most from private ones.

  • Filtration route — cartridge filtration is common on standard configurations; sand filtration appears in the optional accessory list for this range and suits installations where debris load is higher or where a project team prefers backwashing over cartridge changes.
  • Secondary sterilisation — UV sterilisation is listed as an option across the range. For a villa it is a comfort choice; for a spa used by rotating guests, most operators want it specified from the start rather than retrofitted.
  • Ozone — shown on this model's page, but confirm dosage sizing and the service interval with us in writing, since ozone output has to match the water volume of the finished configuration.
  • Filtration cycle — how many times per day the full volume turns over, and whether that cycle is included in the quoted pump duty.
A spa quoted for a hotel, resort or membership facility is a different specification exercise from a private villa installation. Tell us the access pattern — number of users per day and whether children use it — before we lock the treatment package.

Heating, Insulation And Running Cost

Heat pumps appear in the optional accessory list for this range, and insulation likewise. These two options together decide what the spa costs to hold at temperature, which is the line item buyers feel every month.

  • Heat source — confirm whether a heat pump is included or supplied separately, its capacity against the water volume of the agreed configuration, and the ambient conditions it is rated for at your site.
  • Insulation — full-body insulation versus cabinet-only insulation changes both heat retention and noise. In a villa where the spa sits near bedrooms, this is worth specifying deliberately.
  • Cover — an insulating cover is the single cheapest reduction in heat loss; confirm whether it is in the price and what its load rating is.
  • Total power of the finished build — the 2.75 kW on the catalogue page describes the standard configuration. Ask for the revised total after heating, additional pumps and lighting are added, so your electrician has the correct figure.

Shell, Cabinet And Finish

Other entries in our swim spa and outdoor spa range describe an acrylic shell with reinforced cabinet construction. Confirm the shell material, cabinet build and reinforcement for the exact unit you are ordering rather than carrying a description across from another page. The finish decisions worth making early:

  • Shell colour — light and dark interiors read very differently under LED lighting and in direct sun.
  • Cabinet cladding — the exterior has to sit with the surrounding terrace, decking or paving. Coordinate the cladding with your outdoor furniture for villas and resorts so the spa does not look like a delivered appliance in the middle of a designed space.
  • Steps and access — steps are listed among the range's optional accessories. Internal steps take water volume; external steps take deck space. Choose with the plan in front of you.
  • Bench and lounger positions — where seats sit determines both jet placement and how many people the spa comfortably holds.

Lighting And Controls

One LED light is shown in the catalogue specification. Lighting upgrades are among the most requested changes, particularly for spas visible from a living room or used after dark:

  • Number and position of lights — underwater lighting, cabinet accent lighting and perimeter lighting are separate decisions.
  • Colour control — single colour, fixed colour change or remote/app control.
  • Control system placement — one control system is included; agree whether it is mounted on the cabinet, recessed into a wall, or placed in a plant room, and whether you want a second display point.
  • Language and interface — for hospitality projects, confirm the panel language and any lockout settings staff need.

Site Preparation And Electrical

This is where customisation conversations most often go wrong, because the spa is only half of the installation. Before production we want the site conditions confirmed:

  • Slab or plinth design and load rating, with the finished mass of a full spa accounted for.
  • Drainage route and overflow handling at the installation position.
  • Electrical supply: voltage, phase, dedicated circuit sizing and protective device, all based on the revised power figure of the agreed configuration.
  • Access for delivery and crane or forklift routing to the final position.
  • Service clearances — enough room to reach the pump, filter and control system without draining or moving the unit.
  • Wind, shade and exposure at an outdoor position, and how the cover will be stored day to day.

How This Fits A Larger Project Package

Most of our swim spa enquiries do not arrive alone. They come with terrace furniture, paving, pergolas and shading, bathroom fixtures for the adjacent changing room, and lighting for the surrounding landscape. Specifying WS-PC03 through the same one-stop furniture and building materials supplier as those items keeps one party accountable for dimensions, finishes and delivery sequencing. Our custom furniture manufacturer service covers bespoke joinery and finishes around the spa — cabinet cladding, bench seating, storage for chemicals and towels — and our logistics team handles freight by sea, air and rail with door-to-door delivery, so the spa arrives on the same window as the rest of the outdoor package.

If the square 3000 × 3000 footprint is not right for the site, the wider swimming pools and swim spas range covers other sizes and shapes in the configurable outdoor spa line, so a change of format is a discussion we can have before anything is committed.

The Six Questions To Put In Your Enquiry

  • Private residence or commercial use, and roughly how many users per day?
  • Is a swim training or current system required, given that none is listed for WS-PC03 as catalogued?
  • Filtration route and sterilisation package — cartridge or sand, ozone only or ozone plus UV?
  • Heating source and insulation level, with the target water temperature and the local winter condition stated.
  • Shell colour, cabinet cladding, steps type and seat layout, referenced to your site plan.
  • Voltage, phase and circuit available at the position, plus slab design and drainage route.

Send us your site conditions and we will quote WS-PC03 as a configuration

Share the location, exposure, intended use and available electrical supply, and we will return a specification sheet for Outdoor Swim Spa WS-PC03 with equipment list, revised power figure and finish options confirmed line by line — before anything enters production.