A swim spa arrives on a flatbed, gets craned onto a slab and is switched on. That is the version of the story that ends with a call to the supplier twelve weeks later. For the Outdoor Swim Spa WS-PC04CH, a compact 4500 × 3000 × 900 mm unit intended for villas, resort gardens and terrace settings, the installation plan is where the project is actually won or lost. Below is what a complete plan should contain before a single cubic metre of concrete is ordered.

1. A confirmed specification sheet, not a catalogue screenshot

The first document in the pack should be a signed configuration sheet for the exact unit being shipped. Catalogue listings give a starting point; they do not fix what arrives on site. For this model the published figures are:

ItemCatalogue figure
External dimensions4500 × 3000 × 900 mm
Jet total46 pcs
Water pump / filter pump1 pc each
Control system1 set
LED lights1 pc
Total power (as listed)2.45 kW
Features shownWater jets, LED lighting, Ozone

Treat those numbers as the base configuration. Options in the same range — heat pumps, UV sterilisation, sand filtration, additional insulation, steps and upgraded control systems — change both the electrical load and the plant-space requirement. A plan that shows 2.45 kW while the order includes a heat pump is a plan that will be redrawn on site. Every option in the purchase order should appear in the installation drawing with its own circuit, connection point and access need.

Ask for written confirmation of what is included in your configuration before the foundation is poured: pumps, jet count, control system, lighting, ozone or UV unit, insulation package and steps. Confirm the electrical requirement for the assembled specification with our engineering team rather than assuming the base figure.

2. Foundation and structural notes drawn to the shell, not to the deck

A full spa of this footprint carries a substantial water load on top of its own shell and frame. The plan needs a reinforced slab designed for the wet load, level within tolerances your engineer specifies, extending beyond the shell so the perimeter can be accessed. Write down three things explicitly:

  • The bearing area and load the slab is designed for, with the engineer's sign-off attached.
  • A drainage fall away from the shell, plus a channel or trench at the plant end so service water never pools under the cabinet.
  • Clearance on the pump, filter and control side — enough width for one person to work with tools in hand, not just to reach in.

3. Electrical design signed by a licensed electrician

The swim spa is a permanently connected appliance with motors, an ozone generator and lighting operating in a wet environment. The plan should carry the circuit rating, protective device, cable route and bonding details as determined on site under local rules — not copied from a data sheet. Where the installation sits outside Australia's own regulatory context, or anywhere else, the local licensed electrician signs the design; our role is to supply the load and connection requirements for the confirmed configuration so that design can be done correctly the first time.

Include in the drawing: the isolator location within sight of the unit and clear of splash, the dedicated earth and bonding to metal parts of the surrounding structure, and a spare capacity decision if a heat pump or extra lighting may be added later.

4. Access, delivery and lifting method

This is the item most often missing from otherwise careful plans. A 4500 × 3000 mm shell will not pass through a side gate that a garden bed did. The plan should show the delivery route from the truck to the final position: gate widths, overhead cables, pergola beams, glass balustrades and any soft landscaping along the way, plus the lifting method and the crane or forklift's outrigger pads. Where site access is tight, tell us early — we handle logistics and door-to-door delivery including packaging and container loading, and access constraints change the packing and the delivery window.

5. Integration with the surrounding outdoor build

A swim spa is rarely specified alone. In villa and hospitality projects it sits inside a wider outdoor package: swim spas and pools, poolside loungers, cabana daybeds, hardtop gazebos and louvered pergolas for shade. The installation plan should coordinate the spa's position with those elements so that a pergola post never lands where the filter needs to be pulled, and so that lighting circuits and control access stay reachable after the decking is closed in. Our turnkey project solutions cover this coordination — design planning, product specification, production, logistics, site coordination and handover under one scope.

6. Commissioning sequence and handover record

The last page of the plan is the one the owner keeps. It should list the fill and level check, the jet and control-system test run, water-balancing targets for the ozone and filtration cycle, the instruction session for the operator, and a snag list with the parties responsible. Where the project includes other Santerson items — outdoor furniture, shade structures, installation and after-sales support for the wider package — record them on the same handover sheet so warranty and spare-parts questions have one reference point.

Before you pour: five questions to settle

  • Is the configuration confirmed in writing, including every option that affects load or power?
  • Has a local engineer signed the slab for the wet load, and a local electrician the circuit?
  • Is there permanent service access on the plant side after the deck is finished?
  • Is the delivery route and lifting method surveyed, with clearances measured rather than estimated?
  • Does one document carry the commissioning tests, the operator training and the warranty reference?

Send us the site drawings, the intended configuration and the delivery constraints, and we will return the load, connection and access requirements for that exact build, then coordinate production, freight and on-site guidance through to handover.

Talk to SANTERSON about an outdoor swim spa package for your villa or resort project — view the Outdoor Swim Spa WS-PC04CH or contact our project team.