A design brief that reads well in a mood board often stops working the moment it reaches a paneling workshop. The joiner needs dimensions, substrate decisions, finish references and an idea of how the niche will be used before they can price anything. If you are sourcing custom niche paneling for a bathroom or bedroom wall and want an enquiry that comes back with a real quotation rather than a list of follow-up questions, here is exactly what to send and in what order.
Start With the Job the Niche Has to Do
Before drawing anything, write down how the recess will be used day to day. A niche beside a basin has to survive steam, splashes and frequent cleaning. A niche in a bedroom wall is mostly display and light storage. A niche set into a partition may need to hide a service run behind it. Those three cases lead to different material choices, different depths and very different prices, so state the use in the first line of your brief.
Then note what sits inside the recess: bottles and glassware, towels, framed art, plants, decorative objects, or nothing at all. The load and the item sizes set the shelf span and depth. If you intend to place heavy stone or ceramic pieces on a shelf, say so early — it changes the substrate and the fixing detail.
Send Dimensions That a Workshop Can Actually Build From
Paneling is made to measure, so approximate dimensions only delay the job. For each niche, supply:
- The clear opening width and height, plus the finished depth you want inside the recess.
- Height from floor level to the base of the niche, and from floor level to its head.
- Distance from a fixed reference — a completed wall face, a door reveal, a waste outlet — not from another loose item.
- The thickness of any return or shadow gap you want where the panel meets the surrounding wall.
- Whether the niche sits on a stud wall, a masonry wall or inside a joinery unit, because that determines how the carcass is supported.
Where several niches appear on one wall, give the spacing between them and confirm whether they share a single backing panel. Repeating elements are where tolerances show up most visibly, so a sketch with dimensions beats a photograph every time.
Name the Finish System, Not Just the Colour
"Grey" is not a specification. The same tone behaves differently in matte lacquer, textured melamine, wood veneer or stone. For niche paneling, decide on two things and state both:
Substrate and construction
Tell the workshop what the recess lining is made of and how you want edges handled — a mitred edge, a wrapped edge or a matching trim. Also say whether the niche should read as part of a continuous surface or sit proud of it as a framed element.
Surface finish and sheen
If the paneling continues across the rest of the wall, match it to that system rather than choosing independently. Our wall panel systems, wood panel partitions and stone and marble panels are specified the same way, so sending one finish schedule for the whole wall keeps the tones consistent across elements that were produced in different batches.
Where a door is set into the same panelled surface, include it in the same enquiry. Integrated door and paneling has to share the reveal, the hinge direction and the finish with the surrounding panels, and retrofitting it later almost never aligns cleanly.
Decide How the Niche Is Lit Before Production
Lighting is the most commonly missed item. Recessed strip lighting inside a niche needs a channel in the lining, a route for the cable and space behind the panel for the driver or transformer. None of that can be added after the panel is machined.
For each lit niche, confirm:
- Whether light comes from the top, the base, the back or a concealed reveal on one side.
- Warm or cool colour temperature, and whether the fitting is dimmed.
- Where the driver sits and whether you need access to it for maintenance.
- Whether the switch is existing or new work by your electrician.
If you have not settled this yet, say so in the enquiry and ask for the panel to be prepared for a cable run. That single sentence prevents a second production round.
Attach the Documents That Speed Up Pricing
| What you have | Why it helps |
|---|---|
| A dimensioned sketch, even hand drawn | Gives width, height, depth and reference points in one view |
| A site photograph showing the wall and its neighbours | Reveals skirting, cornices, outlets and floor finishes that affect setting out |
| A finish schedule or sample reference | Removes guesswork on colour, sheen and grain direction |
| A room list with quantities per wall | Lets the workshop group repeat elements into one production run |
| Delivery address and access notes | Determines packaging, crate size and how panels are split for transport |
Send everything in one message. Enquiries that arrive as five separate emails with one new detail each are the slowest route to a quotation.
Confirm Fit-Out Scope and Site Practicalities
Paneling rarely travels alone. If your project also needs vanities, storage walls, wardrobes or bathroom fixtures, group them in the same enquiry so one production schedule covers the whole room — you can review our interior fixtures range alongside the joinery. Mention site conditions that affect installation: finished floor levels that are not yet set, other trades working in the same room, or a fixed handover date.
For projects outside China, tell us the destination city and how the goods will be received — a private villa with street parking and a lift is handled differently from a restricted apartment block. Our logistics and door-to-door delivery service covers freight arrangements, and installation arrangements can be planned around your site programme.
What a Good Enquiry Looks Like in Practice
Here is a short example that would come back with a usable quotation:
"Two niches on the main bathroom wall, each 600 mm wide by 400 mm high, 100 mm finished depth, set into a stud wall, base at 1,150 mm from finished floor level. Lining to match the surrounding paneling with mitred internal edges and a 10 mm shadow gap. Concealed LED strip in the top reveal, warm white, dimmed from an existing switch; driver to sit behind the vanity panel for access. Heavy ceramic objects will sit inside, so please specify a lining that carries the load without visible deflection. Panels 2 and 3 on the same wall share one backing sheet. Finish schedule attached. Delivery to Melbourne apartment, lift available, handover expected in Q1."
That paragraph answers the questions a workshop would otherwise ask across two weeks.
Before You Press Send
- Every niche has width, height, depth and a floor-level reference.
- The substrate, edge detail and finish are named, not just the colour.
- Lighting is either specified or flagged as pending.
- Any integrated door or shared backing panel is mentioned.
- Quantities, destination and site access are stated.
Send that and the conversation moves from clarifying questions to drawings, samples and a quotation.
SANTERSON — Custom Partitions & Paneling
Made-to-measure paneling, partitions and built-in joinery for residential and hospitality projects. Send your dimensions, finish schedule and site notes to the enquiry address listed on our contact page, and we will confirm each niche specification before production begins.