A square luxury hot spa with a waterfall feature and LED lighting looks straightforward on a mood board. It is not. The dimensions on a rendering are the easy part; what decides whether the installation runs smoothly is whether the shell, the water systems, the lighting circuits and the surrounding deck were all drawn against the same information. Below is the coordination sequence we use on villa and resort projects, from the first drawing mark to the handover checklist.

Start From the Spa Footprint, Not the Mood Board

The first thing a designer needs from the supplier is a plan footprint with service access, not just a water outline. Our catalogue listings for the configurable swim and hydrotherapy range give outer dimensions per model — the Outdoor Swim Spa WS-PC05 is listed at 5000 × 3000 × 1100 mm, and the Outdoor Swim Spa WS-S06 at 5820 × 2220 × 1110 mm. Treat those as catalogue figures for setting out, and re-confirm the shipping dimensions of the exact configuration before any concrete is poured, because cabinet detailing and access panels change the practical envelope.

On the drawing, mark four things at once: the water outline, the cabinet line, the plant/access side, and the finished deck level. If a waterfall feature is involved, its spill edge has to sit on the same section line as the coping, otherwise the stone mason and the spa fabricator will each build to a different height.

Reading the Waterfall Feature Into the Sections

A waterfall is a coordination item, not a decorative sticker. Three details have to appear on the construction documents:

  • Spill width and lip detail. The notch in the coping or shell edge needs a dimension and a material note, so the deck finish can be returned into it cleanly.
  • The collection arrangement. Whether the water falls into the spa basin itself or into a separate catchment channel determines the trench drain, pump pit and overflow routing on the plumbing drawing.
  • The supply line. Waterfall feed is usually a separate circuit from the jet system. Where the model already lists water columns and jets, confirm with the factory which pumps feed which feature so the electrical schedule matches reality.

For projects where the square format is fixed by architecture but the outline itself needs to change — a bay window alcove, a curved terrace edge — we also supply spa shells cut to custom shapes such as square, round, oval and curved, in an acrylic shell with structural reinforcement: see the Customizable Shape Outdoor Spa page for that option.

LED Lighting: Fix Colour Temperature and Control Before Tiling

Lighting is where most spa projects get revised late, because the fixture location, the driver location and the control method are decided after finishes are ordered. Settle these on the drawings:

  • Fixture count and position. Catalogue specifications state the number of LED fittings per model — two on the WS-PC05 configuration, for example, while some larger configurations list additional small accent lights. Positions should be dimensioned against seating benches, not left to the installer.
  • Colour behaviour. Decide whether the scheme wants a fixed warm white or a colour-changing fixture with a controller. Colour-changing light over a waterfall reads very differently at night from a single temperature grazing the spill edge.
  • Driver and control point. Drivers need a dry, ventilated location within cable reach, plus access that survives the finished deck. Specify it on the electrical plan alongside the spa's own power position.
  • Linked scenes. If the spa lighting shares a scene with terrace or garden lighting, the control supplier has to be named on the drawing before the spa order is placed.

Site Requirements to Confirm Before Order

Every one of these belongs in the site information sheet that comes back with the enquiry. Missing one of them is what turns a smooth delivery into weeks of waiting on site.

ItemWhat the drawing or site team must state
Structural supportBearing arrangement under the cabinet and along the perimeter; full-perimeter pedestal, strip footing or suspended platform, with the filled-and-full-water load carried as a stated figure from the supplier.
Power supplyCircuit rating, phase and protection device at the spa location. Catalogue total power varies widely by configuration — 2.25 kW on one basic setup against 6.35 kW on a larger jetted model — so the electrical schedule must reference the exact specification sheet.
Drainage and overflowLocation of drain connection, and how the waterfall catchment or overflow discharges.
Access routeGate width, turning space and crane or forklift needs from the delivery point to the final position, checked against the delivered package size.
Service accessAn access panel or removable deck section aligned with pumps, filters and controls, dimensioned on plan.
Finishes interfaceDeck coping level, wall finish thickness and any cladding that returns over the cabinet line.

Electrical requirements are configuration-dependent. We ask for the confirmed specification sheet to be attached to the project record before the electrician's first fix, because a circuit sized from a brochure rather than the selected build is the most common avoidable error on site.

Coordination note: local building, electrical and barrier requirements are set by the project's own authority having jurisdiction. We supply product information, drawings and installation guidance; permits, certification of electrical work and any pool or spa barrier compliance remain with the local designer, builder and certifying engineer.

How This Fits Into Our Design Coordination Process

The Interior Design Services scope covers space planning, 3D visualisation and project design coordination — drawings, production coordination and on-site guidance — which is where a spa detail normally gets resolved. Practically it runs in four steps:

  • Brief and setting-out. Footprint, capacity, feature list and site constraints are agreed, then marked on the layout before finishes are selected.
  • Specification lock. Model, configuration, options and the associated pumps, lighting and controls are confirmed in writing, so the electrical and plumbing drawings have one source of truth.
  • Production and pre-shipment check. Configuration is verified against the order, with packing list and shipping dimensions issued for the delivery plan.
  • Delivery and site handover. Door-to-door freight is arranged, then installation guidance, inspection and snagging are handled at the end — see Logistics & Door-to-Door Delivery and Installation & After-sales Support.

Where the Square Spa Sits in the Range

If the architecture calls for a square plan with a spill edge, start with the Square Luxury Hot Spa, Waterfall Feature & LED Lighting page, which describes the #304 stainless steel frame, massage and circulation pumps, optional air blower, sealed base and isolated power layout. Note that this product's own title lists a waterfall feature while its specification text details the pumps, frame and cabinet rather than the spill edge — so have the waterfall arrangement confirmed in writing on the selected build before the section drawing is issued.

For a longer basin that doubles as a lap and therapy pool, compare the Luxury Outdoor Swim Spa with Massage Jets, LED & Water Features, and for a compact round plan the Round Outdoor Hot Tub Spa with Hydrotherapy Jets & Underwater LED Lights. The full category is listed under Swimming Pools and Swim Spas.

A Pre-Order Checklist You Can Paste Into the Drawing Notes

  • Footprint and cabinet line dimensioned on plan, with the access side identified.
  • Waterfall spill width, lip detail and catchment route drawn on section.
  • LED fixture count, positions, colour behaviour and control method fixed before finishes are ordered.
  • Power rating taken from the confirmed configuration sheet, not the catalogue summary.
  • Bearing design signed off by the local engineer against the supplier's load information.
  • Delivery route and service access panel shown on the same drawing set.

Send us the spa location, a marked-up plan or section, and the feature list you want — waterfall, jets, lighting colour and control — and our project team will return a configuration with dimensions, power requirements and a coordination drawing for your architect to check. SANTERSON supplies spa shells and the surrounding outdoor living package as a Turnkey Villa Furnishing scope, so the water feature can be ordered together with the terrace furniture, wall finishes and lighting that surround it.