A ten-metre swim spa is not an off-the-shelf purchase. Before you send a deposit to a factory abroad, you need a clear specification sheet, a confirmed equipment list and a delivery plan that covers freight, site preparation and commissioning. This guide walks through how buyers source the Outdoor Swim Spa WS-S10 from an overseas manufacturer, what to pin down at quotation stage, and which details most often go wrong in cross-border spa projects.
What the WS-S10 Actually Is
The WS-S10 sits in the long-format end of our swim and hydrotherapy range. The catalog lists a shell of 10000 × 2200 × 1420 mm, which means it reads less like a spa and more like a narrow lap pool with a massage zone attached — a shape that suits terraces, rooftop decks, villa gardens and resort perimeters where width is constrained but length is available.
The equipment shown on the catalog page gives you the starting point for any purchase conversation:
| Model | WS-S10 |
| Catalog dimensions | 10000 × 2200 × 1420 mm |
| Control system | 1 set |
| Water pump | 2 pcs |
| Filter pump | 1 pc |
| Jet total | 76 pcs |
| LED lighting | 1 light plus 40 small LED lights |
| Total power | 7.65 kW |
| Features shown | Water jets, LED lighting, Ozone |
Two points deserve emphasis before you compare prices with other suppliers. First, the catalog does not list a swim training system for this model; if your buyer brief calls for counter-current swimming, that is a different variant and needs to be specified explicitly. Second, "total power" of 7.65 kW is the equipment figure on the page, not an electrical design value for your site. Supply capacity, circuit sizing, protection devices and earthing arrangements must be confirmed with the manufacturer's wiring documentation and checked by a local electrician against your national and local rules.
Step 1: Fix the Specification Before Asking for a Price
The single most expensive mistake in overseas spa sourcing is a vague enquiry. "One 10m swim spa, please quote" invites three different answers from three factories, and none of them comparable.
Send a specification sheet that states:
- Overall external dimensions and the shell depth you require, plus the finished water level relative to the deck if the spa is recessed or semi-in-ground.
- Jet count and jet layout — 76 jets on this model can be arranged differently depending on whether the priority is lap swimming, hydrotherapy seating or a mixed-use family pool.
- Pump set: two water pumps and one filter pump as standard, with any upgrade to variable-speed or higher-flow units written into the quote.
- Water treatment: ozone is shown as standard; UV sterilisation is an optional accessory and must be requested if required.
- Heating: a heat pump is an option rather than an inclusion. Specify whether you want one, at what capacity, and to what target water temperature.
- Insulation and steps: both are catalog options that affect price, delivery volume and how the unit performs in cooler climates.
- Filtration type: sand filtration is listed as an option alongside the standard cartridge arrangement.
Optional accessories — control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps — vary by model and configuration. Ask the factory to confirm availability and compatibility for your exact build rather than assuming any option fits any shell.
Step 2: Match the Model to the Use Case
Buyers often ask whether the WS-S10 is the right length. Compare it against the adjacent model in the same series rather than guessing. The Outdoor Swim Spa WS-S12 is listed at 11740 × 2200 × 1470 mm with 73 jets, one filter pump, two water pumps, one main LED light with 50 small LEDs and the same 7.65 kW total power figure. If site length allows an extra 1.7 metres and you prefer a larger relaxation zone over a slightly higher jet count, the S12 is worth quoting side by side.
Where swimming performance is the driver, look at the -T variant of the same shell. The WS-S10-T carries identical 10000 × 2200 × 1420 mm dimensions and the same 76-jet, 7.65 kW equipment set, but adds one swim training system to the specification. That is usually the cleaner route for fitness-focused villas and hotel wellness areas than trying to retrofit a current generator into a non-T shell later.
For projects where the standard rectangular format does not suit the architecture — curved terraces, courtyard layouts, spa precincts with a designed sightline — our range also includes a Customizable Shape Outdoor Spa built in square, round, oval and curved configurations with an acrylic shell and structural reinforcement. And where the brief calls for a clearly separated exercise zone and soak zone, a Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool sets that division out explicitly on the page.
Step 3: Verify the Manufacturer, Not Just the Price
A swim spa is a twenty-year asset installed on a structure you cannot easily move. Supplier diligence matters more than a few percent of unit price.
- Ask for the actual product page and specification sheet. Reputable manufacturers publish model-by-model dimensions, pump counts and power figures. If only a brochure with no model codes exists, treat it as a generic shell being rebadged.
- Confirm factory and production scope directly. SANTERSON operates from China as a furniture and building materials manufacturer with in-house production and custom/OEM capability, which is why swim spas can be ordered alongside the rest of a villa or hotel package — outdoor furniture, paving, pergolas, lighting and interior fixtures from one coordination point. See Custom & OEM Service for how bespoke specification work is handled.
- Check project references in your region. Published case work includes villa projects in Willoughby, Perth, North Turramurra, Melbourne and Sydney, so Australian buyers are not the first to run this supply route. Ask for references relevant to your project type rather than accepting a general export claim.
- Test the after-sales position in writing. Spares for pumps, jets, controls and ozone generators should be named by model in the contract, with the replacement terms stated rather than implied. Our Installation & After-sales Support covers on-site installation, inspection and snags, spare parts and ongoing maintenance — but the specific warranty period and exclusions for your configuration should be confirmed in writing before order.
Step 4: Get the Freight and Site Work Right
A 10-metre shell is an oversize shipment. This is where overseas sourcing either succeeds or becomes a costly lesson.
- Agree the shipping mode and Incoterms early. Long spa shells are usually handled as flat-rack, open-top or break-bulk rather than inside a standard container. The quoted price changes materially depending on whether you buy FOB, CIF or door-to-door. Our Logistics & Door-to-Door Delivery service covers freight forwarding by sea, air and rail, customs paperwork including commercial invoices, packing lists and certificates of origin, packaging and container loading, shipment tracking and delivery to site.
- Confirm import terms for your country case by case. Duties, taxes, permits and inspection requirements are the buyer's responsibility to verify with a local broker. Do not assume a quoted landed price covers everything.
- Book the crane and the access route before the ship sails. A ten-metre shell needs a lift path that matches its dimensions and weight. Check gate widths, overhead lines, tree cover and the ground-bearing capacity of the delivery area.
- Prepare the base and services in parallel with production. The slab or pedestal, drainage, water supply, electrical supply and any plant-room routing should be designed from the manufacturer's dimensional and wiring drawings, not improvised on arrival.
Step 5: Commissioning and Handover
Ask what a completed handover looks like before you sign. A reasonable close-out includes:
- Hydrostatic fill and a leak check on shell, jets and pipework.
- Functional test of each pump, the control system, ozone generation and all lighting circuits.
- Flow and jet performance verified against the agreed specification sheet.
- A named spare-parts pack and consumables list handed over with the unit.
- Operating and maintenance documentation in English, covering water chemistry, filter cleaning intervals and winterisation where relevant.
For resort and hotel buyers, add a training session for engineering staff to that list. Most early "faults" on swim spas are control-panel settings and water balance, not equipment failure, and trained operators prevent the first year of avoidable service calls.
A Practical Checklist Before You Order
- Model code and shell dimensions confirmed against site drawings.
- Jet count, pump set, control system and lighting schedule written into the contract.
- Heat pump, insulation, UV sterilisation, sand filtration and steps either ordered or explicitly excluded.
- Electrical supply requirements obtained from the manufacturer and signed off by a local electrician.
- Incoterms, freight mode, insurance and delivery address agreed in writing.
- Crane, access route and base preparation scheduled against the production lead time.
- Warranty terms, spare-parts list and after-sales response stated in the purchase document.
Discuss your swim spa specification with our project team. Send us your site dimensions, intended use and target water temperature, and we will confirm which configuration in the Swimming Pools and Swim Spas range fits — including the WS-S10, the WS-S12 and custom-shape hydrotherapy pools — together with a freight plan to your site.
Contact: PHILLIP | Phone / WhatsApp: +86-13928214007 | Email: santerson@qq.com | Contact Us