A swim spa is often specified as an "outdoor extra", but on hotel and villa projects it usually decides how a whole zone works. The Outdoor Swim Spa WS-115EⅢ-U is a 5280 × 2200 × 1250 mm hydrotherapy unit with water jets, LED lighting and ozone, supplied as part of our configurable outdoor swim and hydrotherapy range. Because it arrives as a self-contained unit rather than a built pool, it fits sites where a full swimming pool would be impractical — and that single fact determines most of the locations listed below.

What the WS-115EⅢ-U actually delivers on site

Before choosing a location, it helps to know what the unit brings. The catalogue specification for this model is:

Catalogue dimensions5280 × 2200 × 1250 mm
Jet total24 pcs
Water pump / filter pump3 pcs / 1 pc
LED lights2 pcs
Control system1 set
Total power9.65 kW
Features shownWater jets, LED lighting, Ozone

Two details drive placement decisions. First, the footprint is roughly a single parking bay in plan, so it can sit on a deck, terrace or courtyard slab that would never take a pool. Second, total power is 9.65 kW for this configuration, which is real electrical load — not something to be improvised at the last minute on site.

Catalogue-listed options include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so the equipment list and electrical requirements must be confirmed for the selected configuration before ordering.

Hotel projects: where this model earns its place

1. Rooftop and podium decks in city hotels

City hotels rarely have ground-level space for a lap pool, but they do have rooftop bars, podium terraces and setback decks. A unit of this size can be positioned within an existing structural bay, with the jet side facing the view and the plant side kept away from guest-facing glazing. For a boutique property, one swim spa plus aluminium sling sun loungers creates a credible wellness offer without the excavation, tank and plant room a pool demands.

2. Spa and wellness zones as a treatment extension

The 24 jets and ozone system make the unit a natural companion to a treatment programme rather than a swimming facility. Placed adjacent to the spa, it works as a pre-treatment warm-up or a post-treatment hydrotherapy circuit, and guests can be booked into short slots instead of being counted as pool traffic. Keep the circulation path short and covered — robe-and-slippers distance matters more than square metres.

3. Resort pool decks as a quieter alternative

Where a main pool already exists, this unit answers a different demand: adults who want jet massage and a calmer environment away from family swimming. Positioning it at the far end of the deck, screened by planting or a pergola, gives it its own character. Pair it with aluminium cabana daybeds to define a private relaxation area that guests read as premium.

4. Guest-room and suite terraces

For villa-style resort units and premium suites, the spa becomes part of the room product. Here the specification conversation shifts to privacy screening, drainage routes, night-time lighting levels and how housekeeping accesses plant without crossing guest space. This is where early coordination between the room layout and the unit pays for itself.

Villa projects: where it fits better than a pool

1. Courtyards and side setbacks

On infill villas, the outdoor room is usually a courtyard or narrow side setback. A full pool cannot be maintained there — access for plant, cleaning and safety compliance all become problems. This model sits comfortably along a boundary with a deck strip for circulation, and the water jets turn a modest footprint into something you actually use year-round.

2. Terrace and podium levels above ground

For villas with living space lifted to an upper level, the spa belongs on the terrace that serves it. Structural loading, waterproofing to the deck build-up, and a route for the control system all need to be resolved at design stage rather than after the slab is poured. We support this as part of interior design and space planning services, so the unit appears in drawings before it appears on site.

3. Indoor-outdoor spa rooms

Because the unit is self-contained, it also works inside a glazed garden room or a dedicated spa wing, opening to the courtyard through sliding glass. In that setting the LED lighting and ozone system do most of the atmosphere work, and insulation becomes the option worth discussing for year-round use.

4. Gym and wellness annexes

Larger villas with a gym annexe can treat the spa as the recovery station — jets for post-exercise work, warm water for winter training. It is a smaller commitment than a plunge pool plus a separate hot tub, and it occupies one position on the plan instead of two.

How to shortlist the right model for each position

The 115 series is not one unit but several, and length is usually the deciding dimension. If a project needs a swim current as well as jets, look at models whose features include a swim training system — for example WS-115FⅢ at 5000 × 2200 × 1250 mm, or the shorter WS-115AⅢ at 3880 × 2200 × 1250 mm. Where the brief is hydrotherapy and entertainment rather than swimming laps, the WS-115EⅢ-U's longer shell with three water pumps suits it better.

The practical test for each candidate position:

  • Is there a clear delivery and crane or lift path to that position, not just the plan area?
  • Can the required power for the chosen configuration be supplied from an existing or planned board?
  • Where does deck drainage, overflow and maintenance access go?
  • What screens the unit from overlooking neighbours, public areas or the road?
  • Which options — heat pump, insulation, sand filtration, steps, UV sterilization — belong in this installation?
One supplier for the whole outdoor zone. A swim spa rarely stands alone: poolside loungers, cabana daybeds, dining sets and hardtop gazebos are ordered around it, and they come from different vendors on most projects. Sourcing them alongside the spa from one swimming pools and swim spas range keeps frame finishes, textile palettes and delivery windows aligned.

Procurement: what we handle end to end

Specifying a swim spa inside a hotel or villa fit-out means coordinating it with flooring, wall finishes, lighting, landscaping and sometimes sanitary fixtures. That coordination is where split procurement usually fails. Our turnkey solutions for hospitality and villa projects cover design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover.

For freight, we arrange sea, air and rail forwarding with the paperwork that goes with it — commercial invoices, packing lists and certificates of origin — through logistics and door-to-door delivery, followed by installation and after-sales support. Import terms, duties and delivery scope for a specific country are confirmed case by case in the quotation, so nothing is assumed at tender stage.

Before you place the order

Send us the plan of the position you have in mind, together with the model and option list you want. We will confirm the included equipment, the electrical requirement for that configuration, and how the unit coordinates with the surrounding deck and finishes. If the site is in Australia — where we have delivered villa and interior projects in Sydney, Melbourne, Perth and Willoughby — tell us the access conditions at the property as well, since delivery routes on tight residential sites are frequently the real constraint.

Talk to our project team about swim spa positions for your hotel or villa. Contact: https://www.santerson.com/contact/ · Email: santerson@qq.com · Phone / WhatsApp: +86-13928214007 (PHILLIP)