A walnut wardrobe is one of the more expensive items on a bedroom fit-out schedule, and it is specified long before anyone sees a sample. If you are sourcing joinery for villas, serviced apartments or a private house, the difference between a good order and an expensive mistake usually comes down to five questions asked early: what is actually solid wood, which walnut finish you are buying, how the interior is laid out, who measures and manufactures to those dimensions, and what happens when the units arrive on site.
This guide walks through each of those questions from a buyer's point of view, using our own Walnut Solid Wood Wardrobes as the reference product so you can see exactly what we ask a project to confirm.
Start With the Scope, Not the Finish
Most wardrobe enquiries begin with a colour and a mood board. That is the wrong order. Before finish selection, fix three things in writing:
- Which rooms need wardrobes, and how many linear metres. A bedroom with a 3.2 m wall needs a different door plan than a walk-in with two returns.
- Built-in or freestanding. Built-in units are manufactured to the opening and usually travel as panels that are assembled and fixed on site; freestanding units arrive as casings. The delivery, packaging and installation sequence differ, and so does the risk of a site mismatch.
- Who signs off the final dimensions. On multi-unit projects this is where variation creeps in: slab levels, skirting, cornice lines, air-conditioning returns and door swings all change what a wardrobe can occupy.
Getting these three answers settled is what makes the rest of the process comparable. Two quotations for "walnut wardrobes, master bedroom" are not comparable unless both cover the same opening, the same door type and the same internal layout.
What "Solid Wood" Means When You Compare Quotations
The phrase gets used loosely in catalogues. When you compare two suppliers, ask which parts of the unit are solid timber, which are engineered board, and which are a decorative surface over a substrate. Each has a legitimate role:
- Solid timber for doors, frames and drawer fronts gives you a material you can re-sand and re-finish, and a grain that reads as genuine up close.
- Engineered substrates are widely used for large panels precisely because they move less with humidity than a single wide board. That matters in heated or air-conditioned interiors.
- Veneered surfaces deliver a consistent figure across a run of doors, which is often what a designer actually wants when several bedrooms must match.
Our catalogue carries both routes for this reason. If the priority is a solid timber construction through the wardrobe, look at the Oak Solid Wood Wardrobes and Classic Paneled Solid Wood Wardrobes pages alongside the walnut option. If a consistent, calm figure across many doors matters more than solid construction, our Walnut Veneer Wardrobes in the Wood Veneer Wardrobes collection is usually the better fit. Both are made to measure, and both can be specified with project-specific dimensions and finish options.
Decide the Walnut Tone Before You Compare Prices
"Walnut" covers a wide tonal range, and the sheen changes how it reads under bedroom lighting. Two practical checks before you commit:
- Ask for the finish schedule, not just the species name. Clear lacquer, matte lacquer and oil-finished surfaces look different on the same board and wear differently over time.
- Judge the sample next to the flooring and the joinery it will sit beside. Our Dark Brown European Oak Engineered Wood Flooring and Charcoal European Oak Engineered Wood Flooring are the sort of surfaces a walnut wardrobe is specified against — a sample held against the actual flooring batch settles the argument faster than any render.
On multi-unit projects, also ask how the supplier manages grain and tone consistency across a run. A single wardrobes sample looks excellent in isolation; what matters is twenty identical doors installed across several floors.
Specify the Interior Layout Around How You Actually Store Things
The carcass is only half the purchase. The interior plan determines whether the wardrobe works, and it is where buyers most often under-specify. For each unit, decide:
- Hanging ratio. Long-hang for coats and dresses, double-hang for shirts and folded tops. Count the items, do not guess.
- Drawer count and depth. Drawers are the most requested upgrade after installation, which makes them expensive to add later.
- Shelving versus open display. Closed storage keeps dust off off-season clothing; open niches work better for daily-use items and accessories.
- Lighting. Integrated interior lighting changes both the wiring plan and the panel detail, so it has to be resolved before production.
Our wardrobe range is specified layout by layout rather than sold as fixed sizes: made-to-measure sizing, material and finish options, and a layout tailored to the project. For corner rooms and awkward returns, the L Shaped Corner Wardrobes family covers plans that a straight run cannot solve. Where the brief is a dressing room rather than a wardrobe wall, Boutique Style Walk in Wardrobes and the wider walk-in range cover island and full-perimeter layouts.
Read the Door Plan as a Clearance Problem
Door type is the single most common source of regret, because it interacts with the room, not just the wardrobe.
| Door type | Works well when | Check before ordering |
|---|---|---|
| Hinged doors | There is standing room in front of the unit and the doors can swing clear of the bed, the cornice and any ceiling return. | Furniture placement, skirting and architraves that stop the door closing square. |
| Sliding doors | The bedroom is tight and a swing arc would block circulation. | You lose roughly half the opening at any one time, and the track needs a level, fixed head condition. |
| Glass or framed glass fronts | A hotel suite or small room benefits from reflected light. | Interior presentation quality — glass shows everything inside, so shelving hardware has to look finished. |
| Open wardrobes | Dressing areas and boutique-style displays with daily-use clothing. | Dust control and whether the room's use supports open storage. |
If you are weighing a hinged versus sliding decision for a specific plan, send us the elevation and we will mark up the clearance rather than guess from a floor plan.
Check the Supplier's Measurement and Production Chain
A made-to-measure claim is only as good as the measurement behind it. Before you place an order on any wardrobe, ask:
- Who takes the site dimensions, and at what stage. On new builds, screed, plaster and flooring all move the finished level. Dimensions taken off a drawing are not finished dimensions.
- What is produced from those dimensions. Ask for shop drawings showing elevations, internal layout and the fixing detail to wall and ceiling.
- How tolerances are handled on site. Out-of-plumb walls are normal in renovation work. A supplier who plans for scribing and packers is cheaper than one whose unit simply will not sit flush.
- What travels, and how it is packed. Panelised units need protection on edges and corners through freight handling, and clear labelling so the installer knows which panel belongs to which room.
This is where a custom furniture manufacturer working inside a project process differs from a showroom order. We work from the project brief through design and detail confirmation, then production, shipment and follow-up — with shop drawings signed off before anything is cut.
Price a Wardrobe by What Is Included
Wardrobe quotations are rarely comparable at the headline number. Rebuild every quote against the same checklist:
- Carcass, doors and hardware — and which hardware brand and hinge type is quoted
- Interior fittings: drawers, soft-close runners, shelving, lighting
- Site measurement and shop drawings
- Packaging, freight and insurance to the site
- On-site installation, fixing and snag rectification
- What is excluded — electrical connection, making good, plinth or cornice returns
A lower unit price that excludes measurement, freight and installation usually lands higher than a fuller quotation once the site works are added. For projects buying wardrobes alongside kitchen cabinetry, vanities, doors and flooring, consolidating with a one-stop furniture and building materials supplier also reduces the number of trades arguing over who is responsible for an interface.
Plan the Delivery and Installation Sequence Early
Wardrobes are a trade that depends on everyone else finishing first. On site, they typically follow plaster, painting, flooring and the air-conditioning and electrical rough-in. If you import them, that sequencing has to be built backwards from the site programme, not forwards from the factory.
Order wardrobes against your site programme, not against the factory's lead time. Confirm which trades must complete before installation, and confirm who makes good around the unit afterwards.
For international projects we handle freight by sea, air and rail with customs paperwork and door-to-door delivery, then installation and after-sales support including inspection and snag rectification. Import terms, duties and transit arrangements are confirmed case by case for each destination rather than quoted as a blanket service level.
How We Would Specify This on Your Project
If you are shortlisting walnut joinery, here is the sequence we would follow with you:
- Send the room elevations and the number of units required.
- Agree construction route — solid wood through the wardrobe, or veneered surfaces for tonal consistency across a run.
- Confirm finish schedule and sheen against the actual flooring and adjacent joinery.
- Fix the internal layout per unit: hanging, drawers, shelving, lighting.
- Take finished site dimensions and issue shop drawings for sign-off.
- Produce, pack, ship and install to the agreed programme, then close out snags.
Dimensions and selected specifications are confirmed for each project before production, so nothing on this list is assumed from a catalogue page.
Common Questions Buyers Ask
Is a solid wood wardrobe worth the premium over veneered doors?
It depends on what you are buying for. Solid timber doors and frames can be refinished in future years and read as genuine material at close range. Veneered surfaces give a more uniform figure across many doors, which is often the better answer in a multi-bedroom project where consistency matters more than the ability to re-sand later.
Can walnut wardrobes be matched to existing flooring and cabinetry?
Yes, but match with physical samples rather than images. Send us the flooring batch reference and the adjacent joinery finish; we will confirm the finish schedule against those before production.
Do you supply wardrobes only, or the whole bedroom fit-out?
The wardrobe is normally specified with the rest of the interior: interior fixtures including kitchen cabinetry and vanities, engineered wood flooring, doors, wall panelling and lighting. Coordinating these under one procurement reduces interface disputes on site.
How do I compare two wardrobe quotations fairly?
Rebuild both against the same checklist — construction, hardware, interior fittings, measurement and drawings, freight and insurance, installation, and exclusions. Two quotes for the same room are usually only comparable after those lines are itemised.
Before you place a wardrobe order
- Finished site dimensions confirmed, not drawing dimensions
- Construction route agreed: solid wood or veneered surface
- Finish schedule and sheen approved against flooring and adjacent joinery
- Internal layout signed off per unit, including drawers and lighting
- Door type checked against real clearance in the room
- Freight, packaging, installation and snag scope written into the order
Send your elevations, unit count and target programme to PHILLIP by email at santerson@qq.com, or by phone/WhatsApp on +86-13928214007. We will return shop drawings for the walnut wardrobe layouts you are pricing, along with the finish schedule for the project. Browse the wider built-in furniture range to see how wardrobes coordinate with cabinetry and storage walls across a full project.