Model 1003S is a freestanding round ceramic stand basin with a tapered silhouette, supplied by SANTERSON. It suits guest-room powder rooms and secondary bathrooms in boutique hotels, plus villa guest wings, master ensuite alternatives and poolside or garden washrooms. Because it stands on its own pedestal and needs no vanity cabinet, it solves the practical problem small hotel and bathroom layouts create: how to give a room a proper washbasin without spending floor area on cabinetry.

What the 1003S actually is

The Freestanding Pedestal Basin 1003S, Modern Round Ceramic Stand Basin for Bathroom is a vitreous ceramic basin with a dense high-gloss glaze. The glaze is what keeps water stains, limescale and discolouration on the surface rather than in it, which matters when housekeeping cleans the same basin several times a day. The bowl sits on a tapered round column that carries the load to the floor, and the unit is fixed back to the wall through a back panel so it does not rock or tilt with use.

A tap hole is pre-reserved for a single faucet, so no on-site drilling is needed. The page lists the size as 490×490×805 mm; check that figure, together with trap and rough-in details, against the current technical sheet before you put it into a drawing set.

Where it works in a hotel project

In hospitality the 1003S earns its place in the rooms where a vanity run would be over-engineered:

  • Guest powder rooms and cloakrooms. A single basin on a pedestal keeps the footprint tight and leaves space for a mirror and a coat hook.
  • Corridor and lobby washrooms. The wall-fixed back panel gives a solid, anchored feel that guests expect in public facilities.
  • Boutique hotel guest bathrooms with a small layout. No cabinet means the floor stays clear, which makes daily mopping around the pedestal quicker for housekeeping.
  • Renovation and retrofit work. Where existing pipework cannot easily be rebuilt behind a vanity carcass, a freestanding basin is usually the shorter path.

For consistency across a property, the 1003S can be combined with wall-hung basins and toilets from the same sanitary series, so guest-facing bathrooms read as one design rather than a mix of shapes. Wall Hung Ceramic Basin 1003B covers the wall-mounted positions in the same suite, and the matching one-piece washdown toilet handles the WC side.

Where it works in a villa project

Villa programmes have the opposite problem: plenty of floor area, but too many bathrooms to fit out with bespoke joinery at a sensible cost. The 1003S fits where:

  • Guest-wing and ensuite bathrooms repeat across floors and need one reliable specification rather than several.
  • Poolside, garden and pavilion washrooms sit away from the main house, where a vanity unit would be an unnecessary moisture risk.
  • Wet rooms and shower rooms where the design intent is open floor and minimal joinery.
  • Secondary family bathrooms, while the master bathroom gets a vanity or integrated countertop basin instead.

The round, tapered form also softens schemes built on rectified tile, stone cladding and flat-fronted cabinetry. If a project calls for a square footprint instead, Freestanding Ceramic Pedestal Basin 1004S is the compact square version in the same category.

Practical points to settle before you specify

Treat these as a checklist for your mechanical engineer and tiling contractor, not as fixed answers. They decide whether the 1003S drops straight in or needs coordination.
  • Wall fixing. The back panel fixes to the wall, so confirm the wall behind the position is solid or properly framed and packed out, not just tile adhesive over a light partition.
  • Floor finish first. The pedestal lands on the finished floor level. Set the tile or stone before the basin goes in, otherwise the base will sit proud.
  • Trap and rough-in. Confirm drain type and offset against the technical sheet for the exact units you order.
  • Faucet reach and spout height. The reserved tap hole takes a single faucet; check the spout reaches the bowl properly with the round rim.
  • Cleaning regime. Glossy vitreous ceramic wipes clean, but harsh acidic descalants dull any glaze over time — agree the products housekeeping will actually use.

Ordering it as part of a wider fit-out

Specifying basins, toilets, showers, lighting, cabinetry, flooring and wall finishes through one one-stop furniture and building materials supplier removes most of the coordination overhead. SANTERSON is a China-based manufacturer covering furniture and building materials for hospitality, villa and office projects, with custom/OEM work, logistics and door-to-door delivery, installation support and after-sales service under one scope. That means the sanitary suite, the joinery it sits next to and the wall and floor finishes around it arrive on one set of shipping documents instead of six.

The published project cases include villas in Sydney, Melbourne and Perth and housing projects in Willoughby and North Turramurra. If your scheme is Australian, send the drawings early so import terms, duties and Incoterms can be confirmed for that specific delivery.

Frequently asked questions

Does a freestanding basin need a vanity underneath it?

No. The 1003S carries its own weight through the pedestal and is stabilised by the back panel wall fixing, so no cabinet or countertop support is required.

Is one basin enough for a hotel washroom?

For powder rooms and low-traffic guest bathrooms, yes. For higher-traffic public washrooms, pair two units or switch to wall-hung basins so the floor line stays clear between them.

Can it match the rest of the bathroom?

Yes — combine it with wall-hung basins and toilets from the same sanitary series to keep shapes, glaze and detailing consistent across the property.

Talk to us about your bathroom specification

Send us the room schedule or drawing set for your hotel or villa project and we will price the 1003S with the matching sanitary suite, plus the joinery, wall and floor finishes around it. Contact: PHILLIP, +86-13928214007 (phone/WhatsApp), santerson@qq.com — Contact Us.