Grey shaker cabinets sit in an awkward middle ground for a buyer. The door profile is simple enough that almost every cabinet workshop claims to make it, but the colour, the panel construction and the finish are where projects go wrong. That is exactly why enquiries opened with a single line — "please quote grey shaker cabinets" — usually come back with prices that cannot be compared, and why the first reply from a serious supplier is a set of questions rather than a number.

If you are sourcing grey shaker cabinets for a villa renovation, an apartment fit-out or a hotel kitchen package, the quality of the quotation you receive is decided before you send it. Here is what to have ready.

1. The drawings and measurements you can actually hand over

A cabinet is built to millimetres, so a sketch with no dimensions produces an estimate with no meaning. Before contacting a supplier, gather:

  • Cabinet elevation or a full kitchen layout, marked with overall run lengths, room height and the position of windows, doors, radiators and downstands.
  • Appliance schedule: oven, hob, extractor, dishwasher, fridge, microwave or wine cooler, each with its published cut-out dimensions.
  • Sink and tap positions, plus waste and water supply locations if they are already fixed on site.
  • Countertop material and thickness, because the worktop determines carcass heights, upstand details and edge returns.
  • Notes on uneven walls, non-right-angle corners or floor level differences — these drive scribing and filler panels, and they are the most common cause of an installation day overrun.

If you have no drawings yet, say so plainly. Interior design services covering space planning, furniture layouts and 3D renderings exist precisely for projects that start with a floor plan and nothing else, and it is cheaper to settle the layout on paper than on site.

2. Be specific about what "grey" means

Grey is not one finish. In the same collection you will find cool charcoal, warm greige, light dove grey and two-tone schemes that pair grey bases with off-white wall units. Two suppliers can both deliver "grey shaker" and produce cabinets that do not match each other under site lighting.

State the finish type, not just the colour name — painted, lacquered, foil-wrapped or laminated — and give a reference: a RAL or Pantone code, an existing door sample you can post, or a photograph of the project's other joinery. Ask for a physical door sample before you commit to a full order; a grey that reads as neutral in a showroom can pull blue or green against a particular floor or splashback. Where the palette is still open, two-tone shaker cabinets are worth pricing alongside a single-colour scheme, since a darker base with lighter wall units changes both the cost and how a small kitchen reads.

3. The specification details that change the price

These are the questions a manufacturer will ask. Answering them in your first message removes the round trips:

Item to confirmWhy it matters to the quotation
Carcass and door substrateDetermines cost, weight and how the door edge is finished; plywood, particleboard and MDF-based doors behave differently near sinks and dishwashers.
Door constructionA five-piece shaker door with an applied centre panel and a one-piece routed door can look similar in a photograph but are built, priced and repaired very differently.
Made-to-measure or modular sizingProject-specific dimensions let you close awkward gaps and hit exact appliance heights; standard modules are cheaper but force compromise at the ends of a run.
Hardware brand and typeHinges, drawer runners, soft-close mechanisms and handleless profiles are usually quoted separately and are where buyers cut budget and regret it later.
Internal fittingsPull-out trays, corner carousels, larder racking, cutlery organisation and appliance tall cabinets each carry their own price line.
Integrated lighting and glassGlass display units, open niches and LED lighting need wiring routes decided before the carcasses are built, not after delivery.
Delivery termsIncoterms, container loading, destination port or site address and who handles customs all sit in the landed cost, not just the cabinet price.

4. Know which project type you are buying for

A single villa kitchen, a repeat-unit apartment block and a hotel kitchen package are specified differently. Repeat units need identical colour batches across floors and staged deliveries. Hotel work is usually part of a wider fit-out, so the cabinets arrive alongside bathroom fixtures, lighting and loose furniture from other vendors, and the interface details — where cabinetry meets wall panelling, skirting or an integrated appliance tall cabinet — have to be agreed with the other trades.

If your grey shaker run is one line item in a larger package, say so at the outset. A one-stop furniture and building materials supplier can coordinate cabinetry with the flooring, wall panels, doors, lighting and loose furniture around it, which removes the coordination burden you would otherwise carry between several factories.

5. Decide in advance what you are willing to customise

Custom work is not a single switch. The useful question is which of these you need: dimensions only, door profile and colour, substrate and finish, or internal layout and hardware. For most projects, made-to-measure sizing plus a chosen finish and hardware set is enough. Full bespoke design and prototyping matters when the kitchen has to match existing joinery or a brand standard.

For repeat-unit or branded work, custom furniture manufacturer and OEM routes are worth asking about directly: material and finish selection, prototyping before series production, and flexible order quantities. Ask what the minimum order is for your chosen door style, because a bespoke finish on a small run behaves very differently in price from a standard one.

6. The questions to put to the supplier

  • Which grey finishes are stocked as standard, and which require a custom paint or foil run?
  • Is the quoted price for the full layout including filler panels, plinths, scribing and end panels, or only the visible units?
  • What hardware is included, what brand, and what does the upgrade cost?
  • How are cabinet dimensions confirmed before production — shop drawings signed off by you, or your own measurements taken as final?
  • How is colour consistency handled across a split shipment or a second order placed months later?
  • What packaging and container loading plan protects door faces on a long sea leg?
  • Who installs, and what happens if panels arrive damaged — replacement parts, spare hardware, lead time?
One practical habit: ask every supplier to quote against the same signed layout drawing and the same hardware schedule. Comparing two quotations that were built from different assumptions is how projects end up paying more for the cheaper-looking option.

A short preparation checklist

  • Layout drawing with dimensions, ceiling height and fixed services marked
  • Appliance schedule with cut-out sizes
  • Countertop material and thickness decided
  • Finish reference supplied (RAL/Pantone code, posted sample or project photographs)
  • Hardware preference stated, with an upgrade option priced
  • Project type and unit quantities stated clearly
  • Site address, delivery terms and target on-site date given

Where to take the enquiry next

If you want a comparable quotation rather than a rough number, send the layout drawing, the finish reference and the hardware preference in one message. Grey shaker cabinetry for custom kitchen cabinets for residential and hotel projects can then be priced against your actual run — including tall cabinets, integrated appliances and any glass display units — instead of against a generic module count. For work that goes beyond the kitchen into panelling, doors, wardrobes and outdoor areas, project-based coordination from design through production, delivery and installation is what keeps the joinery consistent across the whole building.