Two quotations for the same 8-metre swim spa can differ by tens of thousands because one includes a swim training system and the other does not, or because one lists a heat pump as standard and the other prices it as an extra. This guide shows procurement teams how to compare samples and written proposals for Outdoor Swim Spa WS-PC08T on a like-for-like basis, so the decision rests on scope rather than on the headline number.

Start From the Configuration Sheet, Not the Price Sheet

WS-PC08T is a configurable outdoor swim and hydrotherapy unit in our catalogue, listed at 8000 × 3000 × 1500 mm with water jets, LED lighting, ozone sanitisation and a swim training system among the features shown. Because options such as control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps are quoted separately, two proposals that both say "WS-PC08T" are not automatically comparable.

Before you compare any numbers, ask each supplier to restate their offer against a single configuration sheet that you wrote. That sheet should fix the shell size, the number and type of jets, whether a swim training system is included, which pump set is fitted, how the water is sanitised and heated, what insulation is specified for the site climate, and which access items such as steps are required. Anything a supplier leaves out of your sheet either drops out of their price or reappears later as a variation.

Read the Specification Line by Line

Specification tables are where proposals diverge most often, and where the differences are easiest to miss. For this model our catalogue records a control system of one set, one swim training system set, one water pump, one filter pump, a jet total of 28 pieces, three LED lights and a total power figure of 10.85 kW. Treat those figures as the reference point you confirm on your own order, not as guarantees that every quoted unit is built the same way.

Specification lineWhat to verify in each proposal
Shell dimensionsInternal water envelope versus overall footprint, and whether the quoted height includes the deck or coping detail you intend to build.
Jet count and layoutTotal jets is only half the story. Ask for a jet map showing seating positions, so hydrotherapy zones can be compared rather than just counted.
Swim training systemConfirm that one set is included, and ask what the system consists of and how it is controlled.
PumpsWater pump and filter pump quantities and duty. A proposal with fewer pumps may be cheaper to buy and more expensive to run.
Total powerConfirm the installed load for your chosen configuration, then check it against the electrical supply available at the site.
SanitisationOzone is listed as a feature; ask whether UV sterilisation or sand filtration is included, quoted as an option, or omitted entirely.
Insulation and stepsCatalogue options that are frequently left out of a base quotation and added later.

Where a supplier's table is silent on one of these lines, write "not included" in your comparison sheet rather than assuming it is present. Silence is the most common source of a price gap that only becomes visible after order confirmation.

Compare Within Our Own Model Family First

A useful sanity check is to compare WS-PC08T against adjacent models in the same range, because they share an 8-metre shell length while differing in width, depth and equipment. The catalogue shows Outdoor Swim Spa WS-PC08U at the same 8000 × 3000 × 1500 mm envelope but with four water pumps, a jet total of 33 pieces and one LED light; no swim training system is stated for that model. Outdoor Swim Spa WS-PC08ST steps down to 8000 × 2400 × 1470 mm with six jets and four LED lights, and its catalogue entry leaves the water pump line blank.

That comparison matters when a buyer tells you "I want the 8-metre one." The width, jet count and whether a swim training system is fitted change the experience and the running load far more than the model suffix does. If a competing supplier quotes you an 8-metre unit at a much lower price, check which of these variables they have changed before concluding that they are simply cheaper.

What to Inspect on a Sample or Reference Unit

For villa and hospitality projects we normally advise buyers to see a physical unit, or at minimum a detailed walk-through video of a completed installation, before signing. On the sample itself, focus on the parts that photographs do not show:

  • Cabinet and shell construction. Look at how the acrylic or composite shell meets the frame, how access panels are hinged, and whether plant components are reachable without removing the deck.
  • Jet hardware. Feel the jet faces, check for corrosion on fittings, and ask what material the wet end is made from.
  • Control system operation. Run the display through its modes, including heating setpoint, filtration scheduling and lighting, and confirm the interface language available on site.
  • Noise under load. Ask for the pumps and the swim training system to be running while you stand at the nearest occupied position, particularly for resort or villa sites close to bedrooms.
  • Finish quality. Check LED lens sealing, edge trim, and the condition of any insulation that is visible in the plant bay.

Take notes against the same configuration sheet you used for the proposals. A sample that does not match your sheet is a sample of something else, and comparing it to your quotation will mislead you.

Five questions every proposal should answer in writing

  • Which items from the catalogue option list are included, and which are priced as extras?
  • What is the installed electrical load for this exact configuration, and what supply does the site need to provide?
  • Who supplies the foundation, deck, power feed and any structural or waterproofing works around the unit?
  • What delivery terms apply to the site — port, door, or set-in-place — and which party handles customs clearance?
  • What is covered after handover, for how long, and what happens if a pump, controller or jet fails in year two?

Delivery, Installation and After-Sales Scope Is Part of the Price

A swim spa quotation that stops at "unit delivered" is not comparable to one that covers freight, packaging and container loading, customs paperwork, on-site installation, inspection and snag closure. Our service pages describe a workflow running from consultation and design through production, logistics, installation and after-sales support, with logistics and door-to-door delivery handled as a defined stage rather than left to the buyer.

For projects in Australia we also coordinate swim spas alongside the rest of the outdoor and interior package, because the same container and the same site programme often carry furniture and building materials for the villa or resort. Buyers sourcing several categories from one supplier should compare total delivered and installed cost across the whole package, not the unit price of each line.

Specifications quoted in this article are transcribed from our catalogue pages for the referenced models and describe the standard configuration shown there. Included equipment, options and electrical requirements vary by configuration and must be confirmed on your own order before you compare prices or place an order.

Build a Single Comparison Sheet Before You Decide

The practical outcome of this process is one spreadsheet: rows for shell size, jet count and layout, swim training system, pumps, sanitisation, lighting, insulation, steps, installed power load, delivery terms, installation scope and after-sales terms. Fill it from the suppliers' written documents only, never from verbal assurances or marketing images. When every column has a source document behind it, the lowest bid usually stops being the lowest number and becomes the offer whose scope you can actually verify.

Send us your configuration sheet

If you are evaluating an outdoor swim spa for a villa, resort or residential development, share the dimensions of your site and the equipment you expect to be included. We will confirm what WS-PC08T covers in that configuration, what is quoted separately, and which adjacent model in the range fits the space and budget better.