A quotation for an outdoor swim spa usually arrives looking complete: a model number, a set of dimensions, a jet count and a price. What it rarely answers is whether the unit will actually work on your site, at your voltage, on your substrate, in your climate, with your maintenance routine. The difference between a good proposal and a usable one is almost never the headline specification — it is what sits outside the table.

This guide walks through how to read a manufacturer's proposal for Outdoor Swim Spa WS-PC06CH, the 6000 × 3000 × 900 mm configurable model in our outdoor swim and hydrotherapy range, and what to demand in writing before you place an order. The same checks apply to any comparable swim spa you are evaluating from another supplier.

1. Start with the envelope, not the features

Catalogue dimensions for WS-PC06CH are 6000 × 3000 × 900 mm. Before you look at jets or lighting, put that footprint against your actual site drawing and ask three practical questions.

  • Does the shell fit the clear opening? A spa delivered to a rear terrace has to pass through a gate, around a corner and over a step. Measure the narrowest point of the delivery route, not just the pad.
  • What does 900 mm water depth mean for your users? Depth governs whether an adult can stand comfortably, whether a child is safe unattended, and whether the swimming position is workable rather than cramped.
  • Is the pad built to carry it? A filled shell of this size is a heavy point load. The proposal should state the shipping weight and the filled weight so your engineer or deck builder can size the slab, footings or deck framing from real numbers.

If a proposal gives only external dimensions and no weights, ask for both in writing. A supplier who cannot supply them has not finished designing the product for your site.

2. Read the equipment list line by line

The published specification for WS-PC06CH lists one control system, two water pumps, one filter pump, a jet total of 38, one LED light and a total power figure of 3.25 kW, with water jets, LED lighting and ozone shown as features. Two habits matter when you compare that against a competing offer.

First, separate included from available. Our catalogue lists options such as control systems, UV sterilisation, additional water pumps, heat pumps, sand filtration, insulation and steps — availability and compatibility vary by model. A supplier quoting a lower price may simply have moved those items into a paid option you were never shown. Ask them to mark every line as included, optional or excluded.

Second, check that the power figure matches your supply. The 3.25 kW total for this configuration is what the catalogue records; it is not a guarantee for a modified build. Once you add a heat pump or change pumps, the electrical demand changes with it. A competent proposal states voltage, phase, circuit sizing, protection device and whether the electrical work up to the isolator is in the supplier's scope or yours.

A useful test: ask the manufacturer to confirm, in one sentence, what is not supplied. Suppliers who quote confidently will answer immediately. Vague answers usually mean cost items still hidden in the file.

3. Compare like for like across the range

Configurable ranges are easy to miscompare, because a shorter shell often means a smaller pump set and a lower electrical load rather than a "cheaper version of the same spa". Our 5000 × 3000 × 900 mm model, Outdoor Swim Spa WS-PC05CH, is the nearest sibling in the same configurable family and shows how the specification scales with size.

Specification (catalogue)WS-PC06CHWS-PC05CH
Catalogue dimensions6000 × 3000 × 900 mm5000 × 3000 × 900 mm
Water pumps2 pcs1 pc
Filter pump1 pc1 pc
Jet total38 pcs30 pcs
Total power3.25 kW2.45 kW
Swim training systemNot listedNot listed

The lesson for procurement: never compare two proposals on jet count alone. The 38 jets and two water pumps recorded for the larger shell belong to a longer basin; if your priority is lap swimming rather than hydrotherapy, ask instead what swim-current or swim-training equipment the model carries, because the catalogue does not list one for either of these configurations. If continuous swim resistance is the requirement, look at the dedicated long-channel designs such as our Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool, which pairs a swimming channel with a separate relaxation area.

4. Ask what the shell is made of and how it is supported

Two details decide how well a swim spa ages outdoors, and both are usually missing from a one-page quote: the interior surface and the structure behind it. In our premium outdoor swim spa designs the interior is acrylic with a reinforced cabinet and a high-performance water system — that combination matters because an acrylic shell can be repaired locally, while a laminate shell often cannot, and because an unsupported shell flexes under load and cracks at the corners.

Ask any manufacturer, ours included, to state:

  • the interior material and its thickness, and whether repairs are possible in the field;
  • what the cabinet or reinforcement is made of, and how it resists a wet, outdoor environment;
  • what insulation is fitted, and where — relevant if the spa sits somewhere used through cooler months;
  • how access to pumps, filters and the control system is provided for servicing.

5. Treat water treatment as a specification, not an accessory

Ozone is shown as a feature on WS-PC06CH, and UV sterilisation appears in the options list. Neither should be accepted as a line item without a maintenance question attached: what does the dosing and filtration regime actually require from the owner each week, what consumables must be replaced and how often, and what is the filter capacity relative to the water volume? A proposal that answers these questions tells you the supplier expects the spa to be used; one that does not is selling a showroom photo.

6. Check delivery, installation and after-sales scope

For an imported swim spa the commercial risk usually sits in logistics and handover, not the shell. When we quote a project we set out the stages explicitly — design and specification confirmation, production and quality control, freight and door-to-door delivery, then installation support, inspection of snags, warranty terms and spare parts. Ask any supplier to do the same, and specifically pin down:

  • Incoterms and who handles customs clearance at destination;
  • whether packaging and container loading are described, not just promised;
  • who supplies the crane or placement labour for the final move to the pad;
  • which components carry warranty, for how long, and what voids it;
  • how spares such as pumps, jets, seals and the control system are sourced after year one.

These are the terms that decide whether a low quote stays low. As part of our logistics and door-to-door delivery service we arrange freight forwarding, customs paperwork and shipment tracking; installation and after-sales support are handled as a separate documented stage rather than folded into a price line.

7. Verify the supplier can build to your configuration

A swim spa in a villa or resort scheme rarely stays standard. Colour, steps, insulation level, pump arrangement and filtration may all need to change to suit the site. That is where custom and OEM service becomes a procurement question rather than a marketing one: ask for a production sample or a reference build, confirm minimum order quantities, and get written confirmation of which changes are engineering work and which are cosmetic. A manufacturer who has engineered configurable ranges — different shell lengths on the same cabinet family — can usually absorb these changes cleanly; a trader reselling one fixed SKU cannot.

Our swim and hydrotherapy range covers many configurations beyond these two models, so a proposal can be matched to the site rather than the site forced to fit the product. Where an outdoor spa is only one part of a wider scheme, our turnkey solutions cover villa and hospitality projects from design through handover.

A short pre-order checklist

  • Clear opening measured on the delivery route, not just the pad size.
  • Shipping weight and filled weight stated in writing.
  • Voltage, phase, circuit sizing and electrical scope boundaries confirmed for the chosen configuration.
  • Every item marked included, optional or excluded.
  • Interior material, reinforcement method and insulation described.
  • Weekly maintenance regime and consumable schedule written out.
  • Incoterms, customs responsibility and placement labour assigned by name.
  • Warranty period, exclusions and spare-parts route documented.

If a proposal answers all eight, price comparison becomes meaningful. If it answers three, you are not comparing spas — you are comparing risk.

Send us the site drawing and the specification sheet you were quoted, and we will return a configuration for WS-PC06CH with equipment, electrical demand, freight terms and after-sales scope set out separately. Contact details are on our contact page.