A tall cabinet that carries a washer, a dryer, cleaning supplies, linen and a vacuum cleaner in one run does two jobs at once: it frees up floor space in a narrow villa or apartment hallway, and it keeps laundry out of sight next to the bathroom. It is also the item most often quoted wrongly, because "one tall unit with appliances inside" means something different to every factory. The difference between a unit that fits first time and one that arrives with the doors opening into a wall usually comes down to the brief you send before anyone draws a line.
As a China-based furniture and building materials manufacturer working on villa, hotel and office projects, SANTERSON receives both kinds of enquiries. Below is the checklist we use internally when a bespoke tall unit goes into production, written so you can hand it straight to any supplier and compare quotes on the same basis.
Why this category exposes vague instructions
A low cabinet that misses its mark is an inconvenience you can work around. A full-height unit is a bigger commitment: it meets the floor and often the ceiling, it carries appliances with fixed service connections, and it is frequently installed beside a bathroom or a laundry tray. Three things make it demanding.
- Appliance dimensions are not negotiable. Once you name a washer or dryer model, the carcass has to accommodate that machine plus its hoses, vents and clearance — not just the nominal width printed on the spec sheet.
- Ventilation and services need planning before the panel is cut. Enclosing an appliance changes how air moves around it. That requirement has to reach the factory in the drawing stage, not after delivery.
- Finishes have to match what surrounds them. A tall unit that reads as a wall needs the same door style, handle detail and veneer or lacquer as the joinery beside it, which is a decision for the design stage, not the site stage.
A Multi Function Tall Cabinet in our Laundry Integration collection is made to measure, with material and finish options chosen per project. That flexibility only works if the specification you supply is complete: a one-line enquiry gets an approximate answer back.
What a good brief must settle before pricing
Every item below removes one round of questions from the quotation process, and fewer question rounds is how a project keeps to its programme.
| What to supply | Why the factory needs it |
|---|---|
| Three finished dimensions — width, depth, height to the ceiling or soffit | Tall units are built to the room, not to a catalogue size. Note out-of-plumb walls and any skirting you want scribed around. |
| Appliance make and model, or exact appliance drawings | Determines shelf heights, vent gaps, door cut-outs and whether the machine sits on a plinth or a pull-out platform. |
| Service locations — water inlet, waste, power points, isolators | Fixes which side of the carcass the services run through and whether the back panel needs cut-outs at production. |
| Door type and opening direction | Hinged, sliding or open shelving each need different clearances in front of the unit. Corner positions change this again — see our corner tall cabinet option. |
| Finish reference | Veneer, lacquer, melamine, acrylic or an aluminium frame with glass. Quote a brand and code where you have one; post a physical sample where you do not. |
| Internal layout intent — hanging, drawers, shelves, hamper, ironing station | Tells the workshop what hardware to engineer for, and how deep each compartment needs to be. |
Decide the layout before you decide the finish
Most buyers start with colour. Start with what has to live inside instead, because the internal arrangement sets the carcass, and the carcass determines what a finish can be applied to.
Appliance-first layouts
If the unit is built around machines, brief it as an appliance housing first. Our Integrated Appliance Tall Cabinets line is configured around the equipment you specify, with dimensions and finishes set to the space. Confirm three things in writing before production: the appliance envelope including hoses and vents, the ventilation route, and the electrical provision on site.
Storage-first layouts
Where no machine is involved, decide what you actually retrieve daily versus seasonally. Household linen and towels belong in a linen cabinet with adjustable shelving at reachable heights. Cleaning products, vacuum cleaners and brooms suit a utility tall cabinet, where the internal divisions follow the tools rather than a shelf grid. A run that mixes both is normal in a villa hallway and should be drawn as one elevation with different internals per bay.
Open, closed or both
Closed doors hide clutter but need clearance to swing. Open shelf tall cabinets suit display and daily reach, and read lighter in a narrow corridor, but everything on show has to stay tidy. The practical compromise is a split: closed lower bays for supplies, open mid-section for what you use, closed upper bay for things fetched twice a year.
Questions that reveal the quality of a supplier
Ask each supplier these questions and note the answers side by side. Suppliers working to shop drawings will answer them in detail; those quoting from a standard size range will not.
- Is the carcass supplied assembled or flat-packed? Assembled carcasses need a clear path to the room; flat-packed units need competent on-site assembly.
- Who resolves the interface with walls, skirting and ceiling? Scribing and packing are site decisions that should be agreed before measurement is taken.
- Is lighting designed in or added later? Integrated cabinet lighting needs channels and a power feed planned into the carcass, with electrical specifications confirmed against your cabinet design.
- Does the door match surrounding joinery? If the unit reads as a wall, ask for concealed or flush doors in the same finish range and confirm the grain direction and sheen you want before production.
- What is confirmed before the panel is cut? Ask whether a shop drawing is issued for sign-off. Check that drawing against your appliance datasheets, then approve it in writing.
A practical rule: if you cannot supply the appliance drawings and the service locations, do not request a fixed price yet. Ask for an indicative range instead, and treat the quote as provisional until those two inputs are confirmed.
How a made-to-measure order is handled
Working with a supplier that handles furniture and interior fixtures together shortens this sequence, because the tall cabinet, the doors beside it and the wall panelling behind it can be drawn and coordinated as one package rather than three separate orders.
- Brief and space planning. Room dimensions, appliance list, service locations, intended layout.
- Design proposal and shop drawing. Elevations with finished dimensions, internal layout, door type, finish reference.
- Sign-off and quotation. Confirm every specification on the drawing before pricing is fixed.
- Production and quality control. Carcass, doors, hardware and finishes produced to the signed drawing.
- Packaging and shipping. Packed for the transport mode agreed, with a packing list matched to each unit.
- Installation and inspection. Fitted on site, then checked against the signed drawing before handover.
SANTERSON works as a one-stop furniture and building materials supplier, so a tall cabinet order can be placed alongside the bathroom, kitchen and joinery packages it has to match — with custom sizing, freight coordination and installation support handled through the same project team. Our turnkey project solutions cover villa, hospitality and office work, including custom sizing, freight coordination and installation support.
Three configurations we are asked for most
The stacked laundry column. Washer on a pull-out platform at a comfortable loading height, dryer above on a fixed shelf with the vent routed through the top panel, hamper drawers below, and a shallow upper cupboard for detergents. Brief it as one unit and ask the factory to confirm the total depth against both machines plus their hoses.
The hallway utility run. Two bays, one closed with an internal broom and vacuum bay, one open for baskets. Same carcass height and finish as the linen cabinet at the other end of the hall, so the corridor reads as continuous joinery rather than two separate purchases.
The concealed storage wall. A full-height unit finished to match the wall panelling beside it, with a flush door that closes off the whole bay. Where doors and panels have to read as one surface, specify the finish range, grain direction and sheen on the drawing so every element is built to the same note.
Checklist before you send the enquiry
Run this list once and your first quotation should be much closer to final than provisional.
- Room measured at three points for width and height, with notes on uneven walls
- Appliance datasheets attached, not just model names
- Water, waste and power locations marked on a sketch
- Finish specified by brand and code, or a sample posted
- Door type and opening direction chosen against the traffic route in front of the unit
- A named person responsible for approving the shop drawing
Send that and any competent manufacturer can quote you accurately. Compare the answers on those six points rather than on price alone, and what arrives on site is far more likely to be the unit your drawings described.
Tell us what has to fit inside the cabinet. Send your room dimensions and appliance list and our team will prepare shop drawings for a made-to-measure tall cabinet, coordinated with the rest of your joinery package.
SANTERSON | Phone / WhatsApp: +86-13928214007 (PHILLIP) | Email: santerson@qq.com