An above-counter basin looks simple on a drawing sheet and then turns into a coordination problem on site: the vanity top height, the tap reach, the waste position, the mirror line and the splash zone all have to agree before anything is cut. This article sets out the measurements and project inputs that let us price, build and deliver a Santerson Vessel Basin (Above Counter) specification correctly the first time, so your procurement team can send one clean enquiry instead of five rounds of clarifications.
Why a vessel basin needs more inputs than an undermount bowl
The Santerson Undermount Basin sits below the counter, so the finished deck level is the only height that matters. A vessel basin rests on top of the deck, which means the bowl itself adds to the working height, and the tap has to clear the rim while still reaching into the bowl. That single change ripples through every other dimension in the vanity zone.
Our bathroom products are made to measure rather than supplied in a fixed size grid. Finish, layout and dimensions for the vessel basin are specified per project, so we do not publish one universal dimension drawing for this item. What we can tell you is exactly which numbers we need from your side, and what happens if they arrive late or incomplete.
The measurements to send with your enquiry
| Input | What it controls | How we use it |
|---|---|---|
| Rough opening and clear wall width, including tiles or cladding build-up | Maximum basin footprint and any side clearance to a shower screen or wall | Sets the bowl size band and confirms the deck can carry it once finishes are applied |
| Finished floor level to finished vanity top | Comfortable wash height once the bowl sits above the deck | We check the combined height of top plus bowl against your user profile before production |
| Deck thickness and material | Tap hole position, waste bore, edge profile | Determines tap reach and whether the cut-out needs a radiused or square corner |
| Waste outlet position and trap type | Cut-out placement on the deck and clearance inside the vanity carcass | We coordinate the cut-out with drawer runs, so storage is not blocked after installation |
| Tap style: deck-mounted, wall-hung or tall vessel mixer | Distance from bowl rim to spout, plus splash zone depth | We position bores and confirm the tap you nominate clears the rim of the chosen bowl shape |
| Mirror or cabinet centre line | Sight line for the user standing at the basin | We align the bowl to the mirror, not merely to the carcass |
Send these as a dimensioned sketch or an exported bathroom elevation. A photograph with measurements written on it is acceptable at enquiry stage; a marked-up drawing is what we need before we release drawings for your sign-off.
Project inputs beyond the tape measure
Who uses the room, and how often
A guest powder room, a family bathroom and a hotel guest bathroom place different demands on the same basin. Guest rooms favour compact bowls with generous deck space for amenities; family bathrooms need splash control and storage under the deck; hotel rooms need hardware and surfaces that survive daily housekeeping. Tell us the room type and we will steer bowl shape, countertop material and finish accordingly.
Countertop pairing
The vessel basin is only half of the wash zone. Where you want the deck and bowl package matched to stone or marble, our Santerson Stone & Marble Surfaces range is specified with the same made-to-measure logic, so the material, edge and cut-out are drawn together rather than ordered from two suppliers and reconciled on site.
Vanity carcass choice
If the basin sits on a fitted unit rather than a console table, tell us which carcass you intend. A Santerson Floating Vanity changes where the waste and trap can fall, because the wall fixing zone is fixed and the drawer layout has to clear the bowl outlet. For a shared family bathroom or a two-guest-room layout, we plan the pair as one run: see the Santerson Double Vanity and the Santerson Double Basin Countertop, where basin spacing is one of the inputs we confirm before cutting.
Lighting and mirror line
A bowl standing above the deck throws shadows differently from a recessed bowl, so the light source needs to sit at face and shoulder height rather than directly overhead. Our Vanity Lighting is also specified per project, which means we can match its finish to the tapware and basin package instead of leaving that to chance on site.
How these inputs travel through our process
SANTERSON works as a one-stop furniture and building materials supplier, so the same team that draws your basin handles the cabinetry, wall finishes and joinery around it. For an enquiry on this item the sequence is straightforward:
- Brief and dimensions. You send the measurements above plus room type, quantity per bathroom and target finish.
- Specification and quotation. We confirm bowl shape, deck material, tap and waste arrangement, then issue a quotation tied to that specification.
- Drawings for sign-off. Cut-out positions, finished heights and carcass details go back to you before production starts.
- Production and packing. Bathroom ceramics and stone decks are packed as separate items with the fixings listed on the packing list, so nothing is opened in the wrong sequence on site.
Because we also supply wall panel systems, engineered flooring and lighting for the same project, one specification file covers the finishes that meet the basin. That matters most on villa and hotel work, where a tap bore cut 20 mm out of position on one deck becomes a delay across three trades.
A short pre-order checklist
- Finished floor level, finished deck height and clear wall width, all measured after tiling or cladding is accounted for
- Bowl shape and rim height you have chosen, with the tap model nominated against it
- Waste outlet position and trap type, checked against the carcass drawer layout
- Countertop material, edge profile and thickness, matched to the deck drawing
- Mirror or cabinet centre line, and the vanity lighting position
- Quantities per bathroom type, plus the delivery location and access route for larger decks
Note on published figures. We do not list a single dimension set, weight or load rating for this basin online. Made-to-measure configurations change those numbers, so the confirmed values are the ones on your approved drawing and quotation. Please send your dimensions and we will return a specification you can sign off.
Send your drawings
If you have bathroom elevations, a fixture schedule or even a marked-up floor plan, send them to us with the quantities and destination. We will check the vessel basin against your deck, tapware and carcass arrangement, flag any clash before production, and quote the wash zone as one coordinated package rather than a list of separate parts.