Two swim spas can share the same footprint and still feel completely different once you are standing in front of them. Shell colour, the way the cabinet is finished, how the equipment compartment is built and what the water line looks like all change how a unit reads on site and how much upkeep it asks for. This guide uses Outdoor Swim Spa WS-PC07ST-L as the reference model and shows buyers, contractors and project teams a practical way to compare materials and finishes across the range, so the specification sheet and the delivered product finally say the same thing.

Start With the Shell Material, Not the Colour

Most units in this category use an acrylic shell, including the models in Santerson's configurable swim and hydrotherapy range. Acrylic is the practical default for a reason: it can be formed to smooth, continuous contours so there are fewer horizontal seams where dirt collects; the surface takes colour evenly, which matters when you are matching a shell to a villa terrace or a resort pool deck; and local repair of a light scratch is normally possible without replacing the panel.

What actually differs between suppliers is thickness consistency, how well the shell is backed with structural reinforcement behind the moulded area, and whether the back side is sealed against moisture. A thin or poorly supported shell flexes when the spa is filled, and that flexing is what eventually cracks gelcoat and loosens jet surrounds. When you compare two finishes, ask what sits behind the acrylic and how the shell meets the frame.

Cabinet Finish: The Part That Ages in Public View

The cabinet is the visible skin of an outdoor swim spa, and it takes sun, rain, hose spray and chlorine vapour every day. Compare finishes on four points rather than on photographs alone:

  • Moisture path. Ask whether the cladding is fixed with a drained cavity behind it or bonded flat to the structure. A drained detail lets the assembly dry out; a sealed flat face holds damp against the substrate.
  • UV exposure. The same panel looks different on an open rooftop than under a pergola. Ask what finish is recommended for full sun in your climate instead of accepting one option globally.
  • Access. A finished cabinet should still allow the equipment compartment to be opened without removing panels. Confirm where service access sits before the finish is chosen.
  • Edge treatment. Corners and cut-outs around jets, steps and the cover track are where finishes fail first. Ask how those edges are closed.

Read the Specification Sheet as a Configuration, Not a Promise

The catalog entry for WS-PC07ST-L lists overall dimensions of 7490 × 2400 × 1470 mm, one control system, one swim training system, one filter pump, six jets, four LED lights and a total power figure of 6.55 kW, with water jets, LED lighting, ozone and the swim training system shown as features. Those numbers describe a catalog configuration. The same model family is also listed in shorter lengths at 7000 × 2400 × 1470 mm, so length variants change the footprint while much of the equipment list carries over.

Two details on that sheet deserve attention before any comparison. First, a water pump is not listed for this model in the captured specification, while other models in the same family do show water pumps and considerably higher jet counts — one 7000 × 3000 mm variant shows four water pumps and 62 jets at 9.55 kW. So "six jets" and "62 jets" are not interchangeable hydrotherapy experiences even though both sit in the same product family. Second, total power is a package figure that moves with options such as heat pumps, water pumps and insulation. Quote power against the exact option list you intend to buy, and confirm the electrical supply your site can deliver.

Practical rule: never compare two swim spas by model name alone. Compare them by length, pump count, jet count, and the option list attached to each quotation.

Options That Change Both Finish and Upkeep

Catalog-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Each one also has a finish consequence:

  • Insulation changes the wall build-up behind the cabinet and affects how the exterior panel is fixed.
  • Sand filtration versus cartridge filtration changes what has to be reached for routine cleaning, which should shape where access panels sit.
  • An automatic cover option, listed on related variants in this family, adds a track and mechanism at the water line that must stay clear of cabinet cladding.
  • Steps can be integrated into the cabinet face or supplied as a separate element; integrated steps look cleaner but tie the finish detail to the entry point.

How to Compare Two Quotations Side by Side

Comparison pointWhat to ask both suppliers
ShellAcrylic grade and thickness, reinforcement method behind the moulding, warranty terms on the shell itself.
CabinetMaterial, fixing method, drained cavity or not, recommended finish for full sun, service access location.
Water systemNumber and type of pumps, jet count and placement, filter type, whether the swim training unit is included or optional.
Power and controlsTotal power for this exact option list, control system make, required supply and protection at the site.
Water treatmentWhat ozone or UV equipment is standard versus optional, and what consumables the owner replaces each year.
Delivery scopePackaging, container loading, who handles installation and commissioning, what after-sales support covers.

Coordinate the Spa With the Rest of the Project

A swim spa rarely arrives on its own. On villa and hospitality jobs it sits next to decking, outdoor furniture, lighting and sometimes a pergola or gazebo, and the finish decisions have to travel together. Santerson supplies Swimming Pools and Swim Spas alongside outdoor furniture, wall panels, flooring, lighting and interior fixtures, which means one supplier can align the cabinet finish with the surrounding cladding and deck detailing rather than leaving that match to chance. Where a standard model will not fit the space, the range also includes Customizable Shape Outdoor Spa - Personalized Hydrotherapy Pool, built in square, round, oval or curved layouts on an acrylic shell with structural reinforcement for gardens and terraces.

The service path the company publishes covers design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover, with logistics arranged by sea, air or rail including customs paperwork and door-to-door delivery. For a swim spa specifically, that coordination matters most at three points: the slab and its load path, the electrical run and protection, and the clearance needed to open equipment access after the deck is finished.

A Short Checklist Before You Order

  • Confirm the exact model variant and its catalog dimensions against your prepared base, including working clearance around it.
  • Ask for the pump and jet schedule of the quoted configuration, not the family maximum.
  • Get the cabinet finish specified by material and fixing detail, with a written note on which options are standard and which are extras.
  • Confirm total power for that option list against your available supply before production starts.
  • Agree in writing who installs and commissions the unit, and what after-sales support and spare parts cover.
Send us the site dimensions, your preferred cabinet finish and the equipment you want included, and we will quote Outdoor Swim Spa WS-PC07ST-L or a closer variant in the range with a full configuration list rather than a model number alone. Enquiries go to our contact page.