A wall cabinet package that mixes arched niches, full-height hidden storage, a built-in vanity and a stone bathroom top is one of the hardest joinery scopes to buy well. This guide walks through how buyers and project teams can specify it, split the packages and keep every lot on one drawing set.
What This Scope Actually Covers
The reference project for this scope is an arched niche & full house custom wall cabinet project: a run of made-to-measure joinery that carries the whole guest experience along one or more walls — recessed arched display niches with concealed lighting, layered floating shelves, a floor-to-ceiling wardrobe in flush wood-grain panels, an integrated vanity table with drawers, and a stone bathroom countertop. Its page states that "the arched wall niche with built-in LED lighting is designed as a display shelf for artworks and decorative ceramics", while the full-height wardrobe behind flush panels keeps the bedroom wall neat.
The arched element is what separates this scope from ordinary cabinetry. Arch radius, panel grain direction and reveal lines all have to be agreed before any board is cut, because a curved opening cannot be adjusted on site the way a square one can.
Why Hospitality Projects Buy It This Way
Serviced apartments, boutique hotels and villa-rental schemes use this kind of package to get hotel-grade storage without spending on loose furniture that gets damaged and replaced. A wardrobe built into the wall has no free-standing carcass to knock against the wall; a niche with concealed lighting gives each unit a display point for ceramics or art without extra floor lamps.
It also helps operationally. Housekeeping deals with fewer loose pieces, and the joinery carries the finishes that normally come from separate trades — panelling, doors, vanity units and stone tops all arrive as one coordinated package. As a hospitality furniture supplier, we usually see this scope appear in guest rooms, suites, unit-type apartments and the back-of-house storage that sits behind them.
Step 1: Lock the Room Types Before You Price Anything
Procurement goes wrong when a project prices "wall cabinets" as one line item. Break the scope into lots by room type, because each lot carries different specification risk:
- Guest room wall run — full-height wardrobe with flush panels, plus open display niches or floating shelves.
- Vanity area — integrated vanity table with drawers, often paired with arched textured glass to borrow daylight from the bedroom window.
- Bathroom — double sink vanity countertop in natural stone, matched to the joinery finish elsewhere in the room.
- Corridor and arrival wall — arched niches, backlit feature panels, concealed doors that disappear into the panelling.
Price each lot separately and keep a room-by-room schedule. That schedule becomes your inspection list later, and it is what lets you compare like-for-like between suppliers.
Step 2: Set the Drawing and Measurement Gate
For this scope, drawings are the contract. Before confirming an order, the sequence should run site measurement, then 3D rendering, then production — the one-stop order described on our custom project pages, where "all cabinet dimensions are measured precisely on-site to match kitchen appliances and layout perfectly". For a hospitality buyer, that gate should include:
- A dimensioned elevation for every wall run, with arch radius and niche depth marked.
- A finish schedule naming panel material, wood colour, edge treatment and hardware for each lot.
- A lighting schedule showing where LED strips sit inside niches and shelves, plus the driver location and how it will be accessed for maintenance.
- A set-out drawing that coordinates the joinery with skirting, ceiling lines, sprinklers, sockets and door openings.
Ask for a signed-off rendering of one prototype room type before the full order is released. One approved mock-up room removes most of the arguments later.
Step 3: Decide What Is Custom and What Is Configurable
Not everything in this package needs bespoke engineering. Your supplier's catalogue should separate one-off project packages from configurable systems that are made to your dimensions, because knowing which is which controls both cost and lead time.
| Element | How it is normally supplied | What you specify |
|---|---|---|
| Arched niche and display shelving | Made-to-measure within an integrated wall system; see open display niches | Niche width, depth, arch radius, shelf spacing, lighting |
| Full-height wardrobe wall | Made-to-measure; see full height storage walls | Panel layout, wood colour, internal hanging and drawer zones |
| Bathroom vanity and top | Configurable; see double vanity and stone & marble surfaces | Basin spacing, countertop material, storage layout |
| Concealed and flush doors | Made-to-measure; see decorative concealed doors | Panel match to wall, opening direction, hardware |
| Cabinet and niche lighting | Configurable; see integrated cabinet lighting | Colour temperature, driver access, switching |
| Kitchenette cabinetry | Made-to-measure; see custom built-in kitchen cabinets | Layout, door style, hinges, drawer slides, finishes |
Where a product page lists made-to-measure sizing with material and finish options, treat the numbers on that page as illustrative. Confirm dimensions, materials and electrical ratings for your own configuration before anything is fixed in a bill of quantities.
Step 4: Specify Surfaces and Hardware Like an Operator
Hospitality joinery fails on wear, not on design. Write the specification around what the room will go through over several years of guest use:
- Panel surfaces — ask for a wear-resistant, easy-clean finish that can take repeated housekeeping. Warm wood-grain panels read well in guest rooms; matte lacquer and textured melamine are common where fingerprints matter.
- Edge detail on arches — curved openings show every join, so confirm how the radius is wrapped and whether the edge is solid or laminated.
- Glass to arches — where a vanity sits next to an arched textured glass window, agree the glass pattern with the joinery reveal before ordering.
- Hardware — hinges, drawer slides, support legs and brackets should be named in the schedule. Our custom cabinetry pages list matching hardware as part of the supply, which keeps one party accountable for the whole set.
- Stone tops — natural marble veining varies slab by slab. Approve a slab sample, not just a photograph, and specify how many bathrooms share one batch.
Step 5: Split the Packages Without Losing Coordination
A full-house scope usually crosses several categories that most suppliers quote separately. That is where a one-stop project furnishing supplier earns its place: instead of reconciling a cabinet maker, a stone fabricator, a lighting vendor and a door supplier against each other's drawings, one production plan covers the run.
Even so, keep the packages physically separate in the shipment plan:
- Group by room type and floor, not by product category, so crews install one room at a time.
- Ship stone tops with their own crating and handling notes; they are usually the most fragile items in the consignment.
- Pack lighting, drivers and hardware as a labelled accessories set per unit type, so nothing goes missing on site.
For freight, ask about furniture logistics and door-to-door delivery in the same quotation that covers production, so packing, container loading and customs paperwork sit with the party that knows the crate list. Confirm import terms, duties and Incoterms for your own port of entry case by case.
Step 6: Build the Inspection Checklist Into the Purchase
Put acceptance criteria in the order itself. For this scope we suggest:
- Prototype approval — one complete room type signed off, including arch radius and panel grain direction.
- Pre-shipment check — panel colour and grain against the approved sample, hardware list against the schedule, lighting working on every lit niche.
- On-site snag list — door alignment, drawer run, gap consistency between panels, and access to every LED driver.
- Spare parts set — order spare panels, hinges and slides with the main package rather than chasing them after handover. Our installation and after-sales support covers on-site installation, snags, warranty coverage and spare parts; agree the actual terms in writing for your project.
Common Procurement Mistakes to Avoid
- Treating the arch as decoration. The radius drives panel layout across the whole wall. Fix it first.
- Ordering lighting after the joinery. Niche depth and driver position have to be built in, which is why backlit feature walls belong in the drawing stage, not the fit-out stage.
- Mixing suppliers on one wall. A wardrobe from one maker and panelling from another rarely matches at the reveal. Keep each wall with one supplier.
- No prototype. Full-house scopes multiply small errors across every unit type.
- Skipping the spare parts order. Guest rooms get damaged; replacement panels made a year later rarely match the original batch.
A Practical Timeline to Work Back From
Sequence the scope so that each gate closes before the next one opens:
- Brief and room schedule — types, counts, target finishes.
- Site measurement by the supplier or your surveyor.
- 3D design and elevations, revised until approved.
- Quotation with lots priced separately; finish and hardware schedules attached.
- Prototype room produced and signed off.
- Series production, with pre-shipment inspection agreed in advance.
- Packed shipment by room type, tracked to site.
- On-site installation, snag list, handover and spare parts release.
Set your own dates from the project's practical-completion target; do not assume a supplier-side lead time until it is confirmed in writing for your quantities and finish selections.
Requesting a Quotation That Comes Back Comparable
Send the same pack to every bidder so their numbers line up: room-by-room schedule, elevations with arch radii, finish and hardware schedules, lighting layout, stone sample reference, delivery terms and your acceptance criteria. Ask each supplier to price the prototype separately from series production, and to state clearly what is included in installation support.
If you want a second opinion on an existing set of drawings, send us the elevations and the room schedule. We can review the joinery scope against our own production requirements, flag details that will not hold at series volume, and return a lot-by-lot quotation for the arched niche & full house custom wall cabinet project you are specifying.
Send us your room schedule and elevations. We will review the joinery scope, confirm what can be made to your dimensions and finishes, and quote each lot separately — measurement, 3D design, production, delivery and on-site installation covered as one package.
Contact PHILLIP by phone or WhatsApp on +86-13928214007, email santerson@qq.com, or send your drawings through our contact page so we can review them against your room schedule.