Two quotes for walnut veneer wardrobes can look identical on the page and behave very differently once installed. One keeps a warm, even grain across a full-height wall; the other shows banding at eye level, mismatched edges and doors that sit proud of the frame. The difference is decided before production, in what the samples show and what the proposal actually states.
Walnut veneer wardrobes are made-to-measure built-in pieces: dimensions, layout, substrate, grain direction and finish are all specified per project. That makes them harder to compare than a catalogue item with a fixed price. The steps below follow the order we recommend buyers, contractors and designers work through when they are assessing quotations for a villa or apartment bedroom, a guest room floor, or a whole-house fit-out.
1. Put Both Proposals on the Same Basis Before Reading the Prices
Most price gaps disappear once scope is aligned. Ask each supplier to restate their offer against the same list, and keep the answers in writing:
- The exact opening dimensions supplied, including how skirting, cornices, uneven floors and out-of-square walls are handled.
- Total height reached — whether the wardrobe runs to the ceiling or stops below it, and what happens in the gap.
- Door type and count: hinged, sliding or open, plus the hardware brand and opening cycle rating if quoted.
- Internal layout: hanging rails, shelves, drawers, pull-out accessories, integrated lighting, and which items are included rather than optional extras.
- Edge banding and visible-edge material — the edge of a veneer panel is where quality shows first.
- What is excluded: delivery to the site, hoisting, installation, packaging removal, snag rectification.
A supplier working from your drawings should be able to confirm each line item without being asked twice. Where a proposal says only "walnut veneer wardrobe, made to measure", treat the price as incomplete and request the breakdown before comparing it with anything else.
2. Read the Specification Line for the Veneer Itself
"Walnut veneer" covers a wide range of materials, and the wording in the proposal tells you which one you are buying:
- Cut veneer — sliced from a log, so grain figures vary panel to panel. It needs sequencing and matching across a run of doors.
- Engineered or reconstituted veneer — more uniform repeat, often chosen for long runs where consistency matters more than natural variation.
- Printed decorative laminate in a walnut look — durable and consistent, but it has no real wood surface to refinish.
Ask which of these is quoted, the cutting method if cut veneer is offered, and whether the grain will run continuously across adjacent doors. Also ask what the substrate is and how the veneer is bonded and pressed, because a good face on a poor board is still a poor board.
A practical test: ask the supplier to state, in the proposal, that panels for one wardrobe are cut and sequenced from matching stock. If they will not commit it in writing, expect variation on site.
3. Ask for Samples You Can Actually Judge
A single offcut tells you very little. Request a sample set that mirrors what will be installed:
- A veneer panel in the quoted finish, large enough to judge grain at furniture scale rather than at postcard scale.
- A finished corner or edge sample showing the banding material and how it meets the face.
- A second panel in an alternative sheen — matte against a low-sheen or high-gloss option — so you can see how each reflects the room's light.
- The door handle, pull or integrated profile, plus a drawer front with its runner fitted.
Judge the samples in the room where the wardrobe is going, at both day and night. Walnut reads warm under warm lighting and can turn flat and grey under cool white light. Run your hand across the surface to check for a raised grain or a thick build of lacquer, and look along the edge of the panel for telegraphing — the outline of the substrate showing through the veneer.
4. Compare Finish Systems, Not Colour Names
Colour names are not comparable between suppliers; a finish specification is. Our Walnut Veneer Wardrobes are specified by finish, layout and dimension per project rather than by a fixed shade code, and the same approach works when you assess anyone else's offer. Ask each supplier to state:
- The finish type — lacquer, oil, or other surface treatment — and the sheen level as a number.
- Number of coats and whether sanding occurs between coats.
- Whether the finish is applied in the factory or on site, and what protection is used after installation.
- What is covered for repair if a panel is damaged during delivery or fitting.
The same walnut can look inexpensive under one finish and considered under another. If two proposals differ mainly in sheen and coat count, the cheaper one may need more on-site work to reach the appearance you approved.
5. Match Walnut Veneer Against the Alternatives You Were Quoted
Buyers rarely compare walnut veneer against walnut veneer alone. The table below sets out how we usually explain the trade-offs, using our own product ranges as the reference points.
| Option | What it gives you | Where to look closer |
|---|---|---|
| Walnut Veneer Wardrobes | Natural walnut grain over a made-to-measure carcass; warm tone across large built-in runs; finish and layout specified per project. | Grain sequencing across doors, edge treatment, sheen consistency on tall panels. |
| Walnut Solid Wood Wardrobes | Full timber construction in the same walnut palette, which some buyers and their clients specifically ask for. | Movement across wide panels, cost per linear metre, and how doors are built to stay flat. |
| Matte Finish Veneer Wardrobes | A lower-sheen surface that hides fingerprints and reads calm in bright rooms. | How the matte coat behaves around handles and drawer edges over time. |
| High Gloss Veneer Wardrobes | Reflective surfaces that open up a compact bedroom by bouncing light back into it. | Showcase of dust and marks, and the flatness of the panel behind the gloss. |
| Natural Oak Veneer Wardrobes | A lighter wood tone when the scheme is pale floors and linens rather than dark joinery. | Tone difference against existing oak skirting or flooring already on site. |
| Two Tone Veneer Wardrobes | Walnut paired with a lighter body colour, which breaks up the mass of a floor-to-ceiling run. | The line where the two finishes meet, and whether that detail is drawn or improvised on site. |
6. Check How Each Supplier Handles Layout Decisions
The internal arrangement is where day-to-day satisfaction is won or lost, and it is also where proposals are thinnest. Compare the drawings, not just the bill of quantities:
- Hanging heights set for the users — short-hang sections for shirts and folded storage, long-hang for coats and dresses.
- Drawer positions above knee height, not buried at floor level.
- Shelf depths matched to what is stored on them, with adjustable rather than fixed pins where possible.
- A clear plan for the top of the wardrobe: closed bulkhead storage, open shelves, or a finished soffit flush to the ceiling.
- Lighting shown in the drawing with its switch point and cable route, if lighting is included.
Where a supplier offers design support, ask what they produce at quotation stage — a marked-up elevation, a 3D view, or nothing until after payment. A proposal that arrives with elevations already drawn usually carries fewer surprises in production.
7. Test the Doors and Hardware on the Sample
Hardware is the part of a built-in wardrobe that fails first. Open and close every sample door, and check:
- Whether soft-close is quoted for doors, drawers or both — and named as a product, not "soft close mechanism".
- The gap between door and carcass when closed, and whether an out-of-square wall is packed or scribed.
- For sliding doors, the top track fixing and the wheel assembly rating for the door weight.
- Whether handles are fixings through the panel or an integrated routed profile, which changes how a damaged edge can be repaired.
8. Read the Commercial Terms Side by Side
Once the technical comparison is done, put the terms next to each other:
| Term | What to confirm on every proposal |
|---|---|
| Pricing basis | Per linear metre, per square metre of face, or per item — and whether the measurement in your drawings matches it. |
| Inclusions | Delivery, packaging, installation, protective covering, removal of packing waste. |
| Variations | How a change to layout or finish after approval is priced, and the cut-off point for changes. |
| Lead time | Time from approved drawings to despatch, and what restarts the clock if a finish is changed. |
| Payment stages | Deposit, payment before despatch, and any balance held until installation is signed off. |
| Rectification | Who fixes transit damage or an installation snag, and how quickly. |
For an overseas-manufactured fit-out, ask specifically how drawings are approved before production starts, who pays for a re-made panel if the delivered size is wrong, and how spares such as runners, hinges and shelf pins are supplied later. These questions cost nothing at quotation stage and decide whether a low price stays low.
9. Score Both Offers Before You Decide
Write down a simple comparison across the nine points above: scope clarity, veneer specification, sample quality, finish system, layout drawings, hardware, terms, communication and price. A proposal that wins on price but leaves three of those blank is not cheaper — it is unfinished.
Send us your drawings and the specification you are working to
We produce walnut veneer wardrobes as made-to-measure built-in pieces, with finish, layout and dimensions confirmed for each project. Share your room dimensions and reference images and we will return a proposal that states the veneer type, finish system, internal layout and inclusions line by line, so you can compare it against any other quotation on the same basis.
Part of our wider furniture and interior product range, supported by our custom furniture manufacturing and door-to-door delivery and installation coordination for villa, hospitality and apartment projects.
Note on specifications: dimensions, veneer type, finish system and included accessories are confirmed per project before production. Treat any figure in a proposal as agreed only once it appears in the approved drawings.