A glossy wardrobe door looks identical on two sample boards and behaves very differently after eighteen months of guest use. If you are specifying glossy finish melamine wardrobes for serviced apartments, a hotel floor, an apartment block or a villa fit-out, the supplier conversation is where the risk sits — not the finish itself. This guide sets out what to ask each supplier, what evidence to expect back, and how to score the answers so two quotations can be compared on the same basis.

What "glossy melamine" actually means in a quotation

The phrase covers more than one construction. Before comparing prices, pin down what each supplier is offering, because two lines that both read "high gloss melamine wardrobe" can differ in substrate, in how the gloss layer is formed, and in how the door edge is closed.

  • Substrate. The panel carrying the decorative surface — particleboard, MDF or a moisture-resistant board for wet-adjacent rooms. Ask the supplier to state it per line item, not once in a brochure.
  • Surface. A melamine-impregnated decorative paper pressed onto the substrate, versus an acrylic or lacquer gloss over a laminated door. The sheen can look similar; the resistance to edge lifting and to cleaning chemicals will not.
  • Edge treatment. On a gloss door the edge band is the first place wear shows. Ask what adhesive, what band thickness and what colour match are used, and see a cut sample rather than a finished door.
  • Body versus door. A quotation may specify gloss on the doors and leave the carcass finish open. Confirm the carcass board, its thickness and its edge treatment separately.

Our own catalogue keeps these variants as separate lines — matte finish melamine wardrobes, two tone melamine wardrobes and wood grain melamine wardrobes — so that a specification picks one construction instead of assuming the whole family behaves the same way. Each is made to measure, with material and finish options and a layout set to suit the individual space.

Seven questions that separate suppliers

Send the same short list to every supplier on your tender list. The quality of the answers is usually more revealing than the headline rate.

  1. Which substrate and which surface process, stated per line? A supplier who can answer in one sentence has a fixed production method; a vague answer usually means the specification will be decided on the shop floor.
  2. Can you supply a full door sample including the edge, plus a carcass corner sample? Gloss colour and depth of sheen cannot be judged from a swatch card or a photograph.
  3. How are dimensions captured and confirmed? For commercial work, made-to-measure sizing against drawings or site surveys matters more than a catalogue width range. Ask which one you are buying.
  4. What hardware is included, and who makes it? Hinges, slides, legs and brackets are often quoted as an option. Fix the make and the cycle rating in writing before award.
  5. How do you handle a repeat-order colour match? Guest-room floors are built in phases. Ask what batch control exists so phase two doors match phase one.
  6. What is your pack and delivery method for gloss panels? Gloss faces scratch in transit. Ask for edge protection, interleaving, carton marking and the container loading plan.
  7. Who installs, and what happens to snags? Confirm whether installation support, snag rectification and spare panels are included or priced separately.

Comparing the answers: a practical scoring grid

Score each supplier 0–3 per row. A single low score on a hard requirement — edge treatment, colour batch control — should outweigh a lower price.

CriterionWeak answerStrong answer
Construction detail"High gloss melamine" with no substrate or edge statedSubstrate, surface process and edge band stated per line item
SamplesColour card or rendered image onlyFull door sample with visible edge plus carcass corner sample
DimensioningCatalogue sizes, site to adaptMade-to-measure against drawings or a site survey, with a confirmed shop drawing stage
Hardware"Included" with no brand or ratingNamed hardware, cycle rating and spare-parts supply stated
Batch consistencyNo comment on repeat ordersDocumented colour batch records and a phase-matching commitment
Packaging for glossStandard cartonEdge protection, interleaving, marked cartons, loading plan shared before shipment
After the saleClaims onlyWritten snag process, replacement-lead times and installation support scope

Where a single-supplier model helps on wardrobe packages

Wardrobes rarely sit alone in a commercial package. The same joinery trade usually touches custom built-in kitchen cabinets, vanity units, media joinery and door linings. Splitting those across suppliers multiplies the number of tolerance conversations, delivery windows and snag lists your site team has to manage.

Our route on multi-trade packages is a single coordinated scope: design consultation and space planning, material and product specification, manufacturing with quality control at our own facility in Foshan, project management with site coordination, then installation and handover. We have worked as a furniture and building materials manufacturer supplying that combined scope since 2008, and the service navigation on this site sets out one-stop supply, custom and OEM work, logistics and door-to-door delivery and installation and after-sales support as separate, named stages rather than a single promise.

For Australian buyers this matters most on the coordination side. The project references published on this site include villas and housing work in Willoughby, Perth, North Turramurra, Melbourne and Sydney. We do not claim an Australian office or local trade certification — freight terms, duties and site access are confirmed case by case with each buyer.

Sample-stage tests worth running before you award

Once two suppliers have answered the seven questions, put their samples through the same short routine. It takes a day and settles most arguments.

  • Edge lift check. Run a fingernail along the banding join and leave the sample in a warm room with a damp cloth over one corner for a few hours. Watch for swelling at the join.
  • Cleaning test. Wipe a gloss panel with the detergent your housekeeping team actually uses, then check for haze. Gloss shows cleaning residue far earlier than matte.
  • Hardware cycle feel. Open and close the sample door repeatedly with the quoted hinges fitted; listen for the sound the mechanism makes once dust has worked into it.
  • Colour under site lighting. View the gloss sample under the same colour temperature as the rooms, not in a showroom. Gloss reflects ambient light and shifts appearance between warm 2700K and cooler 4000K schemes.

One thing to fix in writing before award: the substrate, the edge band specification and the hardware make. Everything else on a glossy melamine wardrobe can be adjusted during shop-drawing review; these three decide how the doors look in year two.

A short procurement sequence

The order of work below is the sequence we follow on project enquiries, and it works equally well as a checklist when you run your own tender. It keeps the comparison honest and avoids paying twice for changes:

  1. Issue the same specification sheet to every supplier, including room-by-room elevations.
  2. Collect sample doors and carcass corners; run the four sample tests above.
  3. Score with the grid, then shortlist on evidence rather than price alone.
  4. Review shop drawings for the first phase — dimensions, opening direction, hardware positions, edge detail.
  5. Confirm packaging, container loading and delivery sequence against your site programme.
  6. Agree the snag list process and spare-panel supply before production starts.

FAQ

Is glossy melamine suitable for high-traffic guest rooms?

It performs well when the edge band and hardware are specified properly, and it wipes clean easily. Where a floor sees very heavy daily use with aggressive cleaning products, matte or textured surfaces in the same panel family hide handling marks better — compare textured melamine wardrobes alongside the gloss option before fixing a whole floor on one finish.

Can wardrobe doors and kitchen cabinets be ordered from one factory?

Yes, and keeping panel colour consistent across wardrobes, kitchen joinery and other built-in furniture is one of the main reasons buyers consolidate. Panel materials, surface finishes and matching hardware are specified together, which reduces colour mismatch between trades.

What drawings do you need to quote made-to-measure wardrobes?

Room elevations with floor-to-ceiling heights, a note on skirting and cornice treatment, and the intended internal layout — hanging zones, drawers, shelving. Where the site is already built, surveyed dimensions are preferable to architectural defaults.

Send your elevations and finish shortlist and we will return a specification sheet with substrate, edge band, hardware and packaging stated line by line, so you can place it side by side with your other quotations. Contact PHILLIP on +86-13928214007 or through the enquiry page.