An outdoor conversation set looks simple on a mood board and complicated on a purchase order. A lounge suite made of woven synthetic rattan, cushions and two round tables has to survive sun, wind, salt air and daily guest use, and it still has to match the design intent that was signed off months earlier. Most disputes we see in project procurement are not caused by bad furniture; they are caused by thin documentation. The set is fine, but nobody wrote down which version of it was ordered.

If your project includes the All-Weather Wicker Outdoor Conversation Sofa Set with Round Coffee Tables — a 2-seater wicker sofa, two woven armchairs and a pair of mixed round coffee tables on a hidden aluminium frame — the following record is what we ask buyers to build before production starts. It works just as well for any other woven lounge suite in an outdoor schedule.

1. Configuration: exactly which pieces, in which quantity

Write the set out piece by piece rather than as one line item. "Conversation set, 4 pcs" tells a factory nothing and invites substitutions later.

  • Number of each module: sofa (2-seater), armchairs, coffee tables — and whether the two round tables are identical or a mixed pair in different diameters and heights.
  • Whether modules can be reordered on site, and which pieces share one cushion size.
  • Total footprint per seating cluster, plus clearances for walkways, doors and pool coping.
  • Quantities per location: pool deck, garden courtyard, lobby terrace, guest villa patio. The same set rarely appears in one repeated layout across a resort.

2. Materials as specified, not as named

"All-weather wicker" is a category, not a specification. Two weaves with the same marketing name can differ in resin formulation, cross-section and how they behave after two summers of UV exposure. For this set the outer layer is a fine open-lattice synthetic rattan woven over a hidden aluminium frame; document each layer separately.

LayerWhat to record on the purchase order
WeaveWicker type (synthetic rattan / resin weave), open-lattice or tight pattern, colour code from a physical sample, weave direction on arms and back
FrameAluminium frame, tube size and wall thickness where the factory provides them, surface treatment (powder-coat colour or anodised finish), fixing points for legs and table tops
CushionsFabric name and colour code, whether covers are removable and how they close, foam density and thickness, base colour of the beige cushion set
Table topsRound tabletop material and finish for each table, edge detail, whether the tops are fixed or replaceable
Material names on a website are descriptions, not test certificates. Where a performance claim matters for your project — UV resistance, salt-spray behaviour, fire rating for a hospitality venue — ask the supplier to confirm it in writing for the exact specification you are buying, and check it against the requirements of the local authority or operator.

3. Customisation options to lock down early

Woven lounge suites are usually adjusted rather than ordered off the shelf. For hospitality projects we regularly change wicker colour, cushion fabric and tabletops to follow the interior design scheme. Decide these before the first sample, because a late colour change resets the whole production queue.

  • Wicker colour: approve from a physical sample board, not a screen image or a photograph of another project.
  • Cushion fabric: confirm the fabric range, colour and whether an indoor-look fabric is acceptable in your exposure conditions; keep one spare set per layout for rotation and replacement.
  • Tabletops: if the design calls for a different top material from the standard pairing, record it per table.
  • Dimensions: note any change to seat depth, overall length or table height, since these affect comfort targets and how the cluster fits the paving grid.

SANTERSON works as a custom and OEM furniture manufacturer, so wicker colour, cushion fabrics and table tops on this set are adjusted to project requirements. If you are furnishing several venues, the same customisation route covers cabinetry, lighting, sanitaryware and finishes as well — see our one-stop solution page for how those scopes sit under one contract.

4. Placement and use conditions per location

Record where each cluster will actually sit, because placement drives the specification more than style does.

  • Exposure: full sun, covered loggia, coastal frontage, or shaded courtyard. The breathable open weave stays comfortable in heat, but cushions and tops take the wear.
  • Duty level: guest use at a resort, resident use at a villa, or occasional event use. Higher duty means more spare modules and stronger cushion fill.
  • Storage and wintering: whether sets stay out year-round or are moved under cover seasonally, and where they are stored.
  • Cleaning regime: who cleans, how often, and which methods the operator allows on woven material and cushion covers.

5. Spares, maintenance and handover documents

A handover pack for outdoor furniture should let a facilities team re-order parts three years later without a designer involved.

  • Spare cushion covers in the approved fabric, plus one spare armchair or sofa module per property type.
  • A part list keyed to the drawings: weave sample reference, fabric code, frame finish code, tabletop reference.
  • Cleaning and storage instructions accepted by the operator.
  • Photographs of the approved pre-production sample, with the sign-off date — this is the fastest way to settle a "this does not look like the sample" argument.

6. Logistics and site-readiness records

Outdoor sets arrive bulky and are often the last items scheduled, into areas that are still under construction. Our logistics and door-to-door delivery service covers freight, customs paperwork, packaging and container loading, but the receiving side still needs its own documentation.

  • Packing list per crate with module names matching the purchase order, so inspection on arrival is quick.
  • Delivery window, access route and lift or crane needs for terraces and upper-level decks.
  • Inspection checklist at delivery: weave integrity, frame finish, cushion covers, tabletop condition, and photo records of any damage claim.
  • Storage area on site, dry and off the ground, until installation.

7. Commercial terms worth writing down

  • Unit price per module, not only per set, so later top-up orders are priced consistently.
  • Minimum order quantity and how re-orders below that quantity are handled.
  • Sample cost, who pays freight for samples, and how the approved sample is retained.
  • Incoterms, insurance responsibility and named destination, confirmed project by project with the supplier's logistics coordinator.
  • Warranty scope and exclusions in writing, including what counts as normal wear on woven material and cushions.

A short documentation checklist before you place the order

  • Module-by-module quantities and layout drawings per location
  • Weave, frame, cushion and tabletop specifications with physical sample references
  • Approved colour and fabric samples, signed and dated
  • Placement conditions and duty level for each cluster
  • Spare-parts list and handover pack contents
  • Packing, delivery window, inspection checklist and on-site storage plan
  • Unit pricing, MOQ, Incoterms and warranty terms in writing

If you would like this documentation built with you rather than for you, send us the layout drawings and finish schedule for your outdoor areas. As a China-based furniture and building materials manufacturer, we produce woven conversation sets alongside aluminium-frame lounge suites, pergolas, loungers and dining sets, and coordinate them with the interior finishes of the same project.

Talk to us about your outdoor furniture schedule.

Send your drawings, quantities and target locations, and we will return a specification sheet for the All-Weather Wicker Outdoor Conversation Sofa Set with Round Coffee Tables or the closest matching configuration, with sample references you can approve before production.

Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com