A matte lacquer cabinet quotation is easy to compare on price and hard to compare on substance. Two proposals can look identical in a spreadsheet and behave very differently once the doors are hung, handled daily and cleaned every week. Before you sign, here is how to read the paperwork a manufacturer sends you — and what to ask for when a line is missing.

Start With the Scope Line, Not the Price Line

The first thing to check in any proposal from a furniture and building materials supplier is what the quoted amount actually covers. Kitchen joinery is where scope gaps cost the most, because a run of cabinets involves panels, doors, hardware, appliances, site measurement and installation crews. A low figure often means several of those items sit in someone else’s column.

Write down who supplies each element: carcass and doors; hinges, slides and handles; worktops and splashbacks; integrated appliances; plinth, trims and scribes; delivery to site; installation labour; snag rectification. If the proposal is silent on any of them, treat it as excluded until confirmed in writing.

Read the Finish Description Carefully

“Matte lacquer” is a finish family, not a single specification. In our own catalogue the lacquer kitchen range runs from matte lacquer cabinets through high gloss, metallic and textured lacquer doors, so we know how loosely the word matte gets used in quotations. When you receive a proposal, ask the manufacturer to state:

  • The door substrate, not just “MDF” — density grade and whether moisture-resistant board is used near the sink and dishwasher.
  • The coating system: primer, colour coat and topcoat, and whether the topcoat is specified for fingerprint resistance or anti-yellowing.
  • How many coats and whether edges are wrapped or sprayed. Sprayed edges on a matte door are where wear shows first.
  • Which direction the sample was lit when approved. Matte surfaces shift tone under warm versus cool light, and a sample photographed on a phone is not an approval.

Ask for a physical door sample in the exact colour before production starts, made with the same process as production doors. A small spray-off card is not the same thing as a full door with edges finished.

Check How the Specification Was Fixed

Made-to-measure joinery only works when dimensions come from the finished site, not from architectural drawings alone. Any proposal you assess should state when the site survey happens and who performs it. In our process for projects such as the custom built-in kitchen cabinets supplied to hotel and apartment work, final sizing is taken after floor, wall and ceiling finishes are complete, because a 10 mm floor build-up changes every tall unit on the run.

A useful test: send the manufacturer one problem detail from your drawings — a sloping ceiling, a services riser, an appliance you have not chosen yet — and see how quickly they respond with options. A factory that handles custom work daily will come back with two or three build-ups and their cost effect. One that does not will simply restate the drawing.

Compare Hardware by Brand and Model

ElementWhat a clear proposal statesWeak wording to question
HingesBrand, model, soft-close type, opening angle, cycle rating“Premium soft-close hinges”
Drawer runsLoad rating, extension, run brand and model“Heavy-duty runners”
Handleless detailProfile drawing of the rail or push mechanism“Handleless design included”
CarcassPanel thickness, edge band thickness, back fixing method“High quality board”
AssemblyPre-assembled units or flat-pack on siteSilent

Where a handleless look is specified, confirm the mechanism. A rebate profile and a motorised push-to-open system behave differently in daily use and cost differently to replace.

Ask How the Rest of the Joinery Is Coordinated

Matte lacquer rarely stops at the kitchen. The same finish usually has to continue into wardrobes, media walls and tall storage, and matching a lacquer across separate suppliers is where tone mismatch appears. On our side, the lacquer range continues in matte lacquer wardrobes and in matte lacquer panels for wall systems, which means one factory batch can cover doors, built-in storage and wall cladding on the same project.

A full-house example is our arched niche and full house custom wall cabinet project, where arched display niches, a full-height flush wardrobe, an integrated vanity and stone bathroom countertops were fabricated as one package. Ask your manufacturer which adjacent items they can produce themselves and which they will buy in — each additional trade is another colour approval and another delivery window.

Score the Proposal on Process, Not Promises

Six questions worth asking before you sign

  • Which stage comes first: shop drawings or production scheduling? Shop drawings should be signed off before any board is cut.
  • Who signs the finish sample, and how many revision rounds are included?
  • What is packed together, and how are doors protected for the journey to site?
  • Is installation done by the manufacturer’s own crew or a local subcontractor, and who owns snags?
  • What happens if a door is damaged in transit — remake from stock or remake to the original batch?
  • Which parts are held as spares after handover, for how long?

Answers to these tell you more than any marketing page. A manufacturer that has shipped joinery internationally will answer them with specifics about packing, drawings and remakes. One who has not will answer with assurances.

Put the Two Proposals Side by Side

Take your two or three quotations and rebuild them into one table with the same rows: scope items, substrate, coating system, hardware brand and model, survey stage, drawing approval stage, packing method, installation responsibility, snag and warranty terms. Price then becomes a small row in a much larger comparison, and you will usually find that the cheapest proposal is simply the one that left most of those rows blank.

Specifications, hardware options and service scope vary by project and configuration. Confirm dimensions, materials and current terms directly with the manufacturer before ordering.

SANTERSON is a China-based furniture and building materials manufacturer working on villa, hotel and office projects since 2008, with custom cabinetry, wall systems and built-in joinery produced to project-specific dimensions and finishes. Send us your drawings and finish reference and we will return a proposal you can compare line by line.

Contact: PHILLIP — santerson@qq.com — Phone/WhatsApp +86-13928214007. Enquiry page