A compact bar cabinet looks like a small item on a bill of quantities, yet it is one of the most specification-heavy pieces in a villa or hospitality fit-out. It has to sit inside a joinery run, carry glassware and bottles, sometimes take integrated lighting and an appliance, and match finishes that appear elsewhere in the project. A request for quote that only says "bar cabinet, as drawing" almost always comes back with a price that does not match what the designer had in mind. The following is the information we need from buyers and project teams so that a quotation for Santerson Compact Bar Cabinets can be issued with fewer revision rounds.
Start with the opening, not the cabinet
Send the wall elevation or joinery drawing that shows where the unit goes, with finished floor level and the surrounding run dimensioned. Compact bar units are usually built into a larger cabinetry line, so we need to know whether the cabinet is free-standing, recessed into a niche, or butted against tall cabinets on both sides. Note anything that constrains the box: skirting, cornices, structural columns, floor outlets, or a window sill that crosses the opening.
Give us the three working dimensions you care about — overall width, height and depth — and state which are maximums and which are targets. Made-to-measure sizing is standard on our compact bar cabinets, so an exact opening size with a tolerance stated plainly is more useful than a nominal module size.
Say what the cabinet has to hold
Interior layout follows from contents, not taste. Tell us whether the unit stores stemware, bottles upright or on rails, decanters, a small fridge or wine conditioner, ice buckets, bar tools, or dry goods such as glassware and linen. That single list decides drawer count, shelf spacing, load-bearing shelf material, whether a cut-out is needed for an appliance, and whether ventilation clearance has to be built in.
- Glassware type and quantity — stemware rails need different clearances than stacked tumblers.
- Bottle capacity and orientation — upright racks, display rows or diamond bins take very different depths.
- Appliances — brand and model if already selected, so we can match cut-outs and clearance.
- Loose items — where trays, shakers and open bottles should live day to day.
If the space is too small for a compact unit, our Santerson Wall Mounted Bar Units and Santerson Integrated Bar Systems cover the same brief at a shallower depth, and an island bar unit works when the bar sits in an open-plan kitchen rather than against a wall. Naming the alternative you are considering in the RFQ lets us price both options side by side.
Specify finishes against the rest of the project
Tell us which existing finish the cabinet must match: a kitchen door front, a veneer column, a wall panel, or metal framing. Send the reference by name and supplier where possible, or ship a physical sample. Veneer tone, sheen level and grain direction are where matching fails most often, and a photograph is not reliable for either. Our compact bar cabinets are offered with configurable material and finish options, so we can also propose a deliberate contrast if that is the design intent.
State the hardware expectations too — handleless profile, integrated pull, knob, soft-close on drawers and doors, and any lock requirement for a shared or public area.
Cover lighting and services early
Integrated lighting changes both the carcass and the quotation. Specify whether you want shelf-edge, in-cabinet or back-panel illumination, the colour temperature, and where the driver and switch will sit. Where we supply the fixtures, tell us the destination country's voltage and plug standard so drivers are matched at production rather than swapped on site.
Give the commercial and delivery context
A usable quote also needs the project frame. Please include:
- Quantity and unit mix — how many identical units, and where one-off variations exist.
- Destination city and site access, so freight can be quoted realistically.
- Preferred delivery basis, whether goods are needed for a single handover or in stages.
- Programme dates: design freeze, production window and required site arrival.
- Whether you want us to coordinate the surrounding trades — our services run from design coordination through production, door-to-door logistics and installation support.
For villa and hospitality work we generally supply compact bar cabinets as part of a wider joinery package. Grouping them with the tall bar cabinets, pantry and display units in one enquiry keeps veneer batch, finish and hardware consistent across the run.
Common gaps we see in enquiries
The most frequent cause of a re-quote is an opening dimension taken from a drawing that has not been checked on site. The second is an appliance selected after the carcass was designed, which forces ventilation and cut-out changes. The third is a finish reference given as a colour name with no supplier — two manufacturers can produce very different results under the same descriptor. Confirming those three items in the first message is usually enough to keep the quotation valid.
If you are preparing a package for an Australian project, send the drawings and contents list together and we will return a specification sheet for review before pricing is locked. Enquiries reach our team through the contact page.