A floating vanity looks simple on a drawing. It is one of the easiest bathroom items to get wrong once it reaches site — wall support, basin cut-outs, mirror and lighting positions, and drawer clearances all have to agree before production starts. The checks below show how to judge whether a supplier can actually deliver what your Santerson floating vanity requirement asks for, rather than simply quoting a box with a price on it.

SANTERSON works as a China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects. Vanities sit inside that wider scope alongside ceramics, countertops, mirror cabinets, lighting, cabinetry, flooring and wall finishes. That matters when you assess capability: the useful question is not only "can you build this cabinet", but "can you coordinate everything that has to connect to it".

What a floating vanity requirement really includes

In our catalogue, the floating vanity is listed as a configurable product for residential bathroom projects, with made-to-measure sizing, material and finish options, and a layout tailored to each space. The same configuration logic applies across the wider vanities range — the single vanity, the double vanity for shared bathrooms, and the integrated countertop vanity, where the top and basin are specified as one unit.

Because these units are made to order rather than picked from stock, your requirement is only as good as the specification behind it. Before you ask a supplier for a quotation, be ready to confirm:

  • The finished external width, depth and height of the unit, plus the intended mounting height off the finished floor.
  • The wall build-up that will carry the load — substrate, thickness and fixing method — and who is responsible for confirming it on site.
  • Basin type and how it meets the top: undermount, vessel above-counter or integrated countertop.
  • Drawer and door layout, including which side the openings fall on and what hardware is specified.
  • Finish selection, and whether that finish appears elsewhere in the project so tones match across joinery.

Seven checks on supplier capability

1. Does the supplier make to measure, or only offer fixed sizes?

Ask for a shop drawing at finished dimensions, showing the wall fixing line, basin cut-out and waste position. A supplier who can produce that drawing before you commit is working from a process. A supplier who quotes from a standard size chart and expects site to adapt around it will generate variations later.

2. Can they coordinate the countertop and basin as one scope?

A floating cabinet and a separate stone top from two sources is where most dimensional disputes start. Our undermount basin page asks buyers to confirm cut-out dimensions and countertop compatibility per project, and the above-counter vessel basin page asks the same question about basin and top fit. When cabinet, top and basin come from one manufacturer, cut-out and tap-hole positions are resolved in one drawing set instead of being reconciled between two.

3. Are mirror cabinets and vanity lighting included in the same specification?

Wall-mounted storage and lighting sit directly above a floating unit, so their positions have to be set before the first fix. The LED mirror cabinet record notes that lighting and electrical specifications need confirming for each project, and vanity lighting is likewise specified by finish, layout and dimension. If a supplier treats these as accessories to be chosen after the cabinet is made, expect the mirror to sit off-centre or the light to miss the mirror entirely.

4. Is there custom and OEM capability behind the product?

Bathroom joinery rarely matches a catalogue exactly once tile set-out, pipework and accessibility requirements are factored in. Our Custom & OEM service covers bespoke design and prototyping, material and finish selection across woods, metals, engineered stone and laminates, flexible minimum order quantities, and brand customisation. For an assessor, the practical test is whether the supplier can show how a non-standard width or a different handle detail moves through design, prototype and production — and what it costs in time.

5. Can the same supplier cover the rest of the bathroom?

Consistency across a project is easier to hold when wall-hung WCs, basins, shower systems, mirror cabinets and towel rails come from one source with one finish library. It also shortens the coordination chain: fewer drawings to cross-check, fewer packing lists, fewer parties arguing about where responsibility for a mismatch sits.

6. How is quality controlled before shipment?

Ask what you will actually see before goods leave the factory — signed-off samples or first-article approval, finish and colour verification against an approved standard, hardware and drawer function checks, and packing that protects a wall-hung carcass through ocean freight. Written confirmation of these steps is worth more than a general quality statement.

7. What happens at delivery and after it?

Our service pages describe freight forwarding by sea, air and rail, customs documentation, packaging and container loading, shipment tracking and door-to-door delivery; separately, on-site installation, inspection and snags, warranty coverage, spare parts and ongoing maintenance. Treat the response-time and installer claims on those pages as items to confirm for your specific destination — including Australian import terms, duties, Incoterms, insurance and transit time — rather than assuming a guaranteed service level.

What to ask for in writing

DocumentWhy it matters
Shop drawing at finished dimensionsFixes cabinet size, mounting height, basin cut-out and waste position before production.
Confirmed finish sample referencePrevents tone mismatch between the vanity and other joinery in the same project.
Basin and countertop compatibility noteCut-out, tap-hole and overflow positions agreed as one scope, not two.
Electrical specification for mirror and lightingPositions and ratings set before first fix, avoiding rework on tiled walls.
Packing and container loading planWall-hung carcasses and stone tops are the parts most often damaged in transit.
Delivery terms for your destinationDuties, Incoterms and delivery scope confirmed per project rather than assumed.

Where projects usually go wrong

  • Mounting height fixed too late. A floating unit set at the wrong height off finished floor shifts every dimension above it — mirror, light, tap and waste.
  • Wall build-up not declared. The carcass is only as sound as the substrate carrying it. Confirm the wall make-up and fixing method with the site contractor before production.
  • Basin chosen after the top. Integrated and undermount arrangements need the cut-out resolved at drawing stage; a late basin change means a new top.
  • Finishes specified per room instead of per project. Matching veneer, lacquer or laminate across bathroom, wardrobe and kitchen joinery is easier if the finish library is set once.
  • Snag list left to handover day. Agree inspection points before shipment and again on site, so defects are found while they can still be replaced.
A useful test: send a supplier your bathroom layout and ask what they need back from you before quoting. A capable supplier will come back with questions about wall make-up, waste position, basin type and mirror location. One who does not is quoting a cabinet, not delivering a bathroom.

How the project route works

For vanities bought as part of a wider fit-out, the work follows the same stages we apply across villa and hospitality projects: consultation, design and planning, production, logistics, installation, and after-sales. Interior design support covers space layout planning, concept design, furniture layouts and 3D visual renderings, plus drawing and production coordination with on-site guidance. If your bathroom joinery has to be coordinated with wardrobes, kitchen cabinetry, doors and wall panelling, that single chain of stages is usually simpler than managing each trade separately.

Send us your vanity requirement

Share the bathroom layout, mounting height, basin type and finish preference. We will confirm what is needed to produce shop drawings for approval before production starts.

Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com

Dimensions, finishes, materials, hardware and installation requirements are confirmed per project for each selected configuration.