A sculptural ceiling fixture is not a line item you can order from a photograph. When buyers ask us to quote the Modern Wavy Ceiling Light, Sculptural LED Flush Mount for Dining Room & Bedroom, the fastest quotations come from clients who send the same six blocks of information a purchasing department would send its own factory. Below is exactly what we need, and why each item changes the price.

1. The room: ceiling height, layout and fixing point

A wave-form flush mount sits directly against the slab, so it behaves differently from a pendant. Please tell us:

  • Floor-to-ceiling height and the clear drop available below any beam, bulkhead or cove.
  • The exact ceiling fixing position, plus whether an existing back box or junction box is already in place.
  • Room dimensions and the size of the dining table or bed, so we can judge whether one fixture reads as a centrepiece or whether two are needed.
  • Whether the ceiling is plasterboard, concrete or a decorative ceiling system such as an aluminium suspended ceiling tile or aluminium strip ceiling. Fixing detail differs, and a metal ceiling grid needs its own support arrangement.

2. Quantity, schedule and where the units are going

Unit price depends on how many pieces run in one production batch and whether they ship together. Send us:

  • Total quantity, split by room type if a project mixes dining rooms, bedrooms and lobby areas.
  • The required site date, not just the order date — lighting that arrives after the painting trade has left becomes a storage problem.
  • Delivery address and whether goods go to a port, a warehouse or directly to site.

For villa and hospitality work we normally group lighting with the other fit-out packages — ceramics, joinery, wall panels, flooring — so one shipment covers several trades. If that suits your programme, tell us which other categories are in scope.

3. Electrical specification

This is the item most often left out of an enquiry. Please confirm:

  • Supply voltage and frequency at the site.
  • Switching arrangement: a single live feed at the fixture, or a driver located elsewhere such as a cupboard or ceiling void.
  • Whether dimming is required, and if so which control system the electrician is installing — trailing-edge, DALI, 0–10 V or a smart-home gateway. Driver compatibility has to be settled before production, not after.
  • Cable and connector expectations at the junction box.
Where a project is subject to local wiring rules, performance standards or a specified luminaire schedule, send that schedule with your enquiry. We confirm the details against current technical documentation for the exact configuration you order rather than assuming a catalogue figure applies.

4. Light output and colour requirements

The wave body carries integrated LED strips, so how the light is distributed matters as much as how bright it is. Tell us:

  • Preferred correlated colour temperature — warmer tones for dining and bedroom ambience, cooler for work areas.
  • Whether you want uplight wash onto the ceiling, downlight onto the table, or both.
  • Any colour-rendering or uniformity requirement stated by the designer or consultant.
  • Role of the fitting: a decorative accent over the dining table, or the main light source for the room.

5. Finish, size and customisation

The reference design has an undulating wave body with a mesh-like metal surface. Send us:

  • The finish you want on the metal surface and how it should sit against your other metals — hardware, frames, kitchen cabinetry.
  • Diameter or length needed for the span of your room, and whether a scaled version is required for smaller bedrooms.
  • Reference images from your mood board, plus the paint and fabric palette if the fixture has to match an interior scheme.

Our Custom & OEM Service covers bespoke finishes and project-specific sizing, with prototyping and 3D modelling before tooling. Tell us if you need unbranded product for your own label.

6. Packaging, delivery and after the fixtures arrive

Decorative metal-and-LED assemblies are fragile in transit, so packaging forms part of the quotation. Please confirm:

  • The delivery terms you want quoted — port, warehouse or door-to-door — and the destination.
  • Packaging standard for your site: individual cartons for a fit-out team working room by room, or consolidated crates for one delivery.
  • Spare quantity held for future replacement; ordering spares later usually means another production run.

We arrange freight with the shipping paperwork handled on our side, and we provide installation guidance and after-sales support. See Logistics & Door-to-Door Delivery and Installation & After-sales Support. Transit time, duties and warranty terms are confirmed project by project rather than quoted as a blanket figure.

How the quotation is built from this information

What you sendWhat it decides in the price
Ceiling type and fixing pointMounting hardware, driver location, whether a bespoke backing plate is needed
Quantity and room mixBatch size, unit price, packing method
Voltage, dimming and control systemDriver selection and certification workload
Colour temperature and output targetLED module specification
Finish and dimensionsStandard production or custom tooling
Delivery terms and destinationFreight mode, packaging grade, insurance

Working with a one-stop supplier instead of separate vendors

Lighting rarely fails on its own — it clashes with the ceiling grid, the switch circuit or the delivery sequence. As a China furniture and building materials manufacturer operating since 2008, we supply lighting alongside flooring, wall panels, aluminium ceilings, cabinetry, ceramics and outdoor ranges, so one specification review covers the whole package. Our turnkey solutions follow a six-stage workflow: consultation, design and planning, production, logistics, installation and after-sales.

Published project references include villa work in Willoughby, North Turramurra, Perth, Sydney and Melbourne; scope details for each case are on the individual project pages.

Send your enquiry. Email santerson@qq.com or use our contact page, with the room drawings, quantity, electrical details and finish preference listed above. Attention: PHILLIP, phone/WhatsApp +86-13928214007. We reply with a specification sheet and pricing for your review.