A swim spa line item on a hotel, resort, gym or residential tower schedule can look deceptively simple: one model code, one dimension string, one price. Then the site team starts asking questions about foundations, power, water treatment and who is actually responsible for commissioning. The difference between a smooth install and an expensive argument usually sits in the proposal you approved, not in the shell itself. Here is how to read a quotation for the Outdoor Swim Spa WS-PC05ST-S before it becomes a contract.
Start With What the Model Code Actually Commits You To
SANTERSON's outdoor swim and hydrotherapy range is configurable, and closely related codes in the same family share dimensions but differ in equipment. The catalogued WS-PC05ST-S is listed at 5000 × 2400 × 1470 mm; the WS-PC05ST-L variant sits at 5490 × 2400 × 1470 mm, and a plain WS-PC05ST entry carries the same footprint as the -S. Those suffixes are not decoration. Before you sign anything, confirm in writing that the code on the proforma is the code on your drawing, and that the equipment list attached to it matches what your architect specified.
The catalogued specification for this model shows one control system, one swim training system, one filter pump, six jets, four LED lights and a total power figure of 6.55 kW. Treat those numbers as the starting point of a conversation rather than a finished schedule — the site itself notes that included equipment and electrical requirements need confirming for the selected configuration.
| Catalogued item | What to verify on the proposal |
|---|---|
| Catalogue dimensions 5000 × 2400 × 1470 mm | Whether these are external shell dimensions, and what clearance the plant, steps and access hatch need around them |
| Total power 6.55 kW | Supply phase, dedicated circuit size, isolator location and who supplies the final connection |
| Six jets, four LED lights | Jet layout and seat positions against your intended programme — lap swim, hydrotherapy or mixed use |
| One filter pump, one control system | Filtration cycle time, run-off settings and the spare-parts package shipped with the unit |
| Ozone, swim training system shown as features | Whether both are in the quoted scope or priced as options on a separate line |
Figures above are transcribed from the product listing. Options such as heat pumps, UV sterilisation, water pumps, sand filtration, insulation and steps are listed separately in the catalogue and vary by model, so they should appear as their own priced lines rather than being assumed.
Read the Scope Boundaries, Not Just the Equipment List
Commercial proposals go wrong at the edges. The unit itself is only part of the job, so ask each of these in writing and get the answer attached to the quotation:
- Substrate and support. Who designs and pours the slab or plinth, and what load and level tolerance does the shell require? A spa sits on a very different loading assumption than a planter.
- Power to the unit. Confirm the incoming supply your electrician must provide — phase, protection, cable size and isolator position — against the total power figure quoted.
- Water fill, drain and drainage. Where the waste runs, whether an overflow or drain chamber is included, and who connects it on site.
- Access and lifting. Delivery to the dock is not delivery to the terrace. Confirm the crate dimensions, the route from the kerb, and whether a crane or tail-lift is in your scope or theirs.
- Commissioning and handover. Whether somebody fills, energises, tests and demonstrates the system, or whether that falls to your local contractor.
Judge Long-Term Running Cost From the Treatment Stack
A swim spa in a hotel, gym or multi-unit development is a piece of mechanical plant with a maintenance regime attached. The listed features for this family — water jets, LED lighting, ozone and a filter pump — tell you something about daily operating cost before you ever ask for a warranty document. Ozone reduces but does not eliminate sanitiser demand; the filter pump sizing drives how often the volume turns over; insulation and heat pump options drive electricity consumption in cooler climates.
Ask the supplier to state, per configuration: filtration run time, recommended chemical regime, replacement intervals for cartridges and lamps, and which of those parts ship with the unit as spares. If you are comparing two suppliers, this is where the real price difference appears — not in the headline number.
Where a project needs a different footprint or a shape driven by the plan, SANTERSON also lists customisable-shape outdoor spas in square, round, oval and curved configurations with an acrylic shell, which is worth pricing early if your design team has already committed to a non-standard recess.
Check the Supplier Can Carry the Whole Package
On a commercial job the swim spa rarely arrives alone. Poolside loungers, shade structures, cabinetry in the changing rooms, wall finishes and lighting all sit on the same schedule with the same handover date. Coordinating that through one supplier rather than six removes a large category of interface risk, which is why many project teams look for a one-stop furniture and building materials supplier who can also handle freight, customs paperwork and door-to-door delivery.
SANTERSON operates as a China-based furniture and building materials manufacturer serving hospitality, villa and office projects, with services covering design coordination, custom and OEM production, logistics and after-sales support. Their project record includes villa work in Willoughby, Perth, North Turramurra, Melbourne and Sydney — useful reference points if you are procurement-side on an Australian development, though scope, dates and local service arrangements should be confirmed for your own project rather than inferred from a case list.
A Simple Scoring Sheet Before You Award
- Model code on the proforma matches the code on the drawing, with no silent substitution between -S, -L and base variants.
- Every option — heat pump, UV, sand filtration, insulation, steps — is a separate priced line you can accept or delete.
- Power, water, drainage and substrate responsibilities are named, not implied.
- Delivery route, lifting and on-site placement are addressed in the quotation.
- Commissioning, spares and warranty terms are attached documents, not verbal assurances.
- Maintenance intervals and consumable costs are stated so you can model lifetime cost against alternatives.
The practical test: hand the proposal to your mechanical contractor without context and ask what they would need to install it. If they can answer that question from the document alone, the specification is complete. If not, close the gaps before award.
Next Step
Send your layout, target use and utility constraints and request a configuration-specific quotation for the WS-PC05ST-S alongside two alternatives in the same family. Comparing three complete scopes side by side is faster — and far cheaper — than negotiating one incomplete one after the slab has been poured.
Talk to SANTERSON about swim spa specifications for your project
Contact PHILLIP · Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Enquiries: santerson.com/contact