A built-in display niche looks simple on a drawing. It is a recessed opening, a shelf, a lit box. Then it arrives on site as part of a made-to-measure wall system, and the questions that decide whether the project goes smoothly are not design questions any more — they are after-sales questions: who fixes a chipped return panel, who supplies a replacement shelf board in three years, and what happens if the wall and the joinery arrive on different containers.

Santerson Open Display Niches sit inside our Integrated Storage Walls collection, made to measure for each project with material and finish selected per space. Because the niches are custom-built rather than catalogued stock, the after-sales conversation has to be settled before the order is placed. This article lists what a buyer — a contractor, developer, interior designer or homeowner's agent — should put in writing when specifying these niche units on a villa, apartment or hospitality fit-out.

1. Confirm What the Warranty Actually Covers on a Made-to-Measure Item

Our Installation & After-sales Support service covers on-site installation, inspection and snag lists, warranty coverage, spare parts or replacement, and ongoing maintenance. For an open display niche, "warranty" needs to be narrowed down item by item, because a niche is not one component — it is a carcass, visible edges, shelf boards, sometimes integrated lighting, and the finish that has to match the adjoining panels.

Ask the supplier to state, in the order documents:

  • which parts are covered — carcass structure, edge banding or solid edges, painted or laminated surfaces, shelf fixings, and any integrated lighting or transformer;
  • how long each part is covered for, and whether the clock starts at shipment, at delivery, or at handover signature;
  • which damage is excluded — on-site impact, moisture exposure in wet areas, load beyond the stated shelf allowance, or modification by a third party;
  • what evidence you need to keep: the snag list signed at installation, photographs before fixing, and the batch of finish used.

A practical rule: if a claim would depend on a date, get that date defined in writing. Handover signatures on site are often weeks after the container arrives, and an undefined start date is where most disputes begin.

2. Agree the Spare-Parts Route Before Production

A display niche that is damaged during the fit-out — or three years later, when a new owner re-decorates — cannot be swapped with anything off a shelf. The replacement has to match the panel material, the wood colour or lacquer, and the dimensions recorded at production.

Before production starts, confirm:

  • that your shop drawings and cut list are archived against the project reference, so a later order can be re-manufactured to the same specification;
  • which finish codes and batch numbers were used, kept in the project file — colour drift between production batches is the most common reason a replacement niche looks wrong;
  • whether small single-unit re-orders are accepted, and at what quantity they become uneconomical;
  • who pays freight on a warranty replacement part, and which Incoterms apply to that shipment.

Where a project mixes open niches with closed units from the same wall — for example full height storage walls or concealed cabinets — ask that all panels in one elevation be produced in a single batch. One batch means one finish reference, and future repairs stay invisible.

3. Set the Snag List and Acceptance Point on Site

Open display niches are unforgiving: every reveal, return and shelf line is visible once the lighting is on. Our after-sales stage includes inspection and snags, but the buyer should define what "inspected" means before the installers arrive.

Check on siteWhat to record
Reveal lines and shelf level across the elevationPhotograph with a straight edge; note tolerances agreed on the drawing
Edge condition at the niche openingMark any chip or gap on the snag sheet before sign-off, not after decoration
Finish match against adjacent panelsCheck under daylight and under the room's own lighting; record finish code
Integrated lighting, if specifiedTest driver and access point; confirm which side services it later
Shelf load in useAgree the intended display load — ceramics and stone differ from books

Sign one document, not several. A single snag list signed by the installer and the site representative is what both sides will look at a year later.

4. Decide Who Installs, and What Follows From That Choice

Our service scope includes installation and after-sales support for interior projects, alongside logistics and door-to-door delivery. Some buyers take the crates and let a local joinery crew fix the units; others keep installation with the supplier.

Both are workable. What matters is that the warranty wording follows the choice:

  • Supplier-installed: alignment, fixing to substrate and finish protection at handover sit with the supplier; local trades still own the wall they built the niche into.
  • Local crew installed: ask for fixing details, packing marks matched to drawings, and a technical contact for queries during installation. Confirm in writing that third-party fitting does not void the product warranty, and which defects it does shift to you.

For wall systems, the substrate is usually the real risk. A niche built out of alignment by others will look like a manufacturing fault when it is not — so record the setting-out dimensions before the units land.

5. Ask How Maintenance Is Handled for the Finish You Chose

A display niche collects dust on every shelf and takes fingerprints on every return. Cleaning method depends on the surface: matte laminate, lacquer, veneer and painted panel each behave differently, and an abrasive cloth on a matte panel leaves a shine that cannot be spot-repaired.

Ask for the care instruction specific to your selected finish, and keep it with the handover file. For hospitality and rental villas, this is worth turning into a one-page note for housekeeping — approved cleaner, approved cloth, what never to use.

6. Know What Happens If Part of the Order Is Rejected or Damaged in Transit

Our logistics scope covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery, with cargo insurance options available. For a wall system split across several crates, the buyer should agree in advance:

  • how damage is claimed — photographs at the container, noted on the delivery receipt, reported within what window;
  • whether a damaged niche module is repaired on site or re-manufactured, and which is faster for your programme;
  • who carries the cost of insurance, and whether it is arranged by the supplier or by your own forwarder.

Getting this settled before shipping prevents a two-week argument in the middle of a site programme.

A Buyer's Pre-Order Checklist

  • Warranty scope written part by part: carcass, edges, surfaces, shelf fixings, lighting
  • Warranty start date defined as a specific event, not "from delivery"
  • Finish code and production batch recorded in the project file
  • Shop drawings archived against the project reference for future re-orders
  • Single snag list format agreed before installers arrive
  • Installation responsibility confirmed, with warranty consequences stated
  • Care instructions for the chosen finish issued at handover
  • Transit damage claim route and insurance responsibility fixed in writing
  • Related units — niche shelving, floating shelves, closed cabinets — specified with the same finish batch where they read as one wall

Where This Fits in a Turnkey Package

When display niches are ordered together with the rest of the joinery — as in our arched niche and full house custom wall cabinet project, where lit arched niches, floating shelves, a full-height wardrobe and an integrated vanity were produced for one home — the after-sales terms can be written once for the whole package. One order, one handover document, one spare-parts reference. That is usually the cheapest form of after-sales cover you can buy, and it costs nothing but attention at the specification stage.

Specifying display niches as part of a wall system for a villa, apartment or hospitality project? Send us the elevation drawings and finish preference, and we will confirm dimensions, material options and the after-sales terms in writing before production. Contact SANTERSON to start a quotation.