A ten-metre swim spa is not an item you can buy off a shelf. When the buyer is a hotel, resort, wellness club, sports facility or residential development, the same model number can arrive with different equipment, different electrical assumptions and different responsibilities for site works. This guide uses the Outdoor Swim Spa WS-S10-T as the reference point and shows procurement teams how to put competing quotations on the same footing before a purchase order is issued.

Why the Same Model Number Produces Different Quotations

The WS-S10-T sits in a configurable outdoor swim and hydrotherapy range rather than a fixed specification catalogue. The published catalog entry lists overall dimensions of 10000 × 2200 × 1420 mm, one control system, one swim training system, two water pumps, one filter pump, a jet total of 76 pieces, LED lighting together with small LED lights, ozone and a stated total power figure. Two suppliers can both truthfully quote "WS-S10-T" while differing on what is included, how the plant is arranged, and which party supplies the items around the vessel.

That is why the first comparison question is never price. It is scope: which equipment is in the box, which options are priced separately, and where the supplier's responsibility ends and the local contractor's begins.

Specification note: figures for dimensions, jet counts and total power come from catalog listings that describe a configurable product. Treat them as reference values to be reconfirmed against the configuration you actually order, in writing, before production starts.

Seven Points to Compare Line by Line

1. The equipment schedule, not the model name

Ask every supplier for an itemised schedule: control system, swim training unit, water pumps, filter pump, jet layout and count, lighting, ozone or alternative sanitisation, and any heat pump. Then confirm which items are standard and which are priced as extras. Catalog options commonly quoted around this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps — availability and compatibility vary by model, so an option offered on one chassis is not automatically available on another.

2. Electrical load and site supply

A stated total power figure tells you the machine's demand; it does not tell you what your building must deliver. Compare how each supplier states voltage, phase, circuit protection, cable routing to the plant area and earthing requirements, and check who is responsible for the supply up to the unit — the swim spa supplier or the project's electrical contractor. On a commercial site this single line item often moves the whole budget, because distribution boards, cable runs and switchgear are local works.

3. Filtration and water treatment for public or semi-public use

Private residential duty cycles and commercial duty cycles are very different. Compare filter pump capacity, filtration media (cartridge versus sand filtration where offered), turnover assumptions, and how sanitisation is handled — ozone as standard, with UV sterilization listed as an option in this range. Ask what the recommended maintenance routine is for continuous public use, and what spares you should hold on site.

4. Insulation, heating and running cost

For a spa that operates outdoors through cold months, insulation and heat pump selection drive the operating bill far more than the purchase price does. Compare what insulation is specified for the shell and lid, whether a heat pump is included or optional, and how each supplier expects the unit to be held at temperature between sessions. Ask for the assumptions behind any running-cost figure — ambient temperature, water temperature, hours of use and cover discipline.

5. Structural support, access and installation sequence

A vessel of this length arrives as a large component that must be delivered, lifted and set on prepared support before finishes around it are built. Compare each supplier's delivery format, lifting and set instructions, support requirements, and the tolerance they allow for a slab or platform. Also compare how steps, surrounds and drainage interface with the shell, and at which stage the site must be ready.

6. Documentation and after-handover support

Commercial buyers need more than a manual. Compare what each supplier provides: as-built configuration documentation for the exact unit shipped, wiring and plumbing diagrams, commissioning records, spare-parts lists with part numbers, and named contacts for warranty and replacement parts. SANTERSON's installation and after-sales support service covers on-site installation, inspection and snags, warranty coverage, spare parts and ongoing maintenance; ask any supplier to state the same items explicitly rather than implying them.

7. Freight, packaging and delivery terms

Cross-border purchase of a swim spa involves container loading plans, packaging specification, customs documents and inland delivery to site. Compare Incoterms, what is included in the quoted price, and who handles import formalities and last-mile delivery. SANTERSON's logistics and door-to-door delivery service describes freight forwarding by sea, air and rail, packaging and container loading, customs paperwork and shipment tracking; whatever the supplier, get the delivery scope in writing, including duties and site access.

Reading the Specification Table Properly

Catalog entries for this family of swim spas are deliberately close to one another, which is where careful comparison pays off. Within the range, models differ in length, jet count and equipment fit while sharing a common build approach — for example the shorter WS-S08T1 / WS-S08T2 at 7800 × 2200 × 1500 mm, and the longer WS-S12-T at 11740 × 2200 × 1470 mm. Where a swim training system is central to the brief, check that it appears in the specification of the exact model quoted: within the same length, one variant lists a swim training system and the closely related variant does not.

Comparison itemWhat to ask each supplier
Overall dimensions and water volumeCatalog dimensions versus as-built footprint, plus usable swim length for training use
Jet packageTotal jet count, seat and lounge positions served, jet types and adjustability
Pumps and plantWater pumps, filter pump, plant location, accessibility for service
Swim training systemWhether fitted to the quoted model, nozzle arrangement and control
Water treatmentOzone as standard, UV sterilization and sand filtration where offered as options
LightingMain LED fitting plus small LED lights, control and colour options
Power and heatingTotal power figure, supply requirements, heat pump included or optional, insulation specification
Options and accessoriesControl systems, steps, insulation and other catalog options priced separately

Where a One-Stop Supplier Changes the Comparison

Commercial swim spas rarely stand alone. A resort or residential development usually needs them coordinated with poolside lounging, cabanas and sun loungers, hardtop shade structures, exterior paving and cladding, and interior finishes nearby. Dealing with a single manufacturer for that group reduces the number of interfaces to manage — one set of drawings, one production schedule, one shipment plan. As a China-based furniture and building materials manufacturer offering custom and OEM work, SANTERSON supplies swimming pools and swim spas alongside outdoor furniture collections and exterior finishes, which is how these items can be procured as one package rather than several unrelated orders. Where a project needs the spa shell adapted to a terrace layout, customizable shape outdoor spa options in square, round, oval and curved forms are worth asking about at concept stage, before paving and structural slabs are designed.

A Practical Shortlist Test

  • Send the same enquiry to every supplier: site location, intended use, target water temperature, hours of operation and required completion date.
  • Require an itemised equipment schedule with standard versus optional clearly marked.
  • Require a dimensioned drawing showing footprint, plant access, lifting points and support zones.
  • Require the electrical and plumbing interface scope stated as a responsibility split between supplier and site contractor.
  • Require delivery terms, packaging specification and the document set for import.
  • Require warranty terms, spare-parts list and the escalation contact in writing.
  • Score each bid on lifecycle cost — insulation, heat pump and maintenance access — not only on delivered price.

Before You Sign

The comparison that protects a commercial project is documentary. A quotation that names the configuration, lists what is standard, states the interface responsibilities and attaches drawings can be enforced; a price against a model number cannot. Confirm the WS-S10-T configuration you intend to buy in writing — dimensions, jet package, pumps, swim training system, treatment options, insulation and power assumptions — and check that the site works around it are scheduled after those answers exist.

To compare configurations and request an itemised quotation for a commercial swim spa programme, contact SANTERSON at https://www.santerson.com/contact/.