A swim spa is not a single item on a purchase order. It is a shell, a pump set, a control system, an electrical load and a maintenance regime arriving at site as one assembled product — which means the supplier you choose decides far more than the price per unit. If your project list includes the Outdoor Swim Spa WS-115AⅢ, here is what a project buyer should actually verify before issuing a purchase order.

Start With the Catalog Specification, Not the Brochure Rendering

The first test of a supplier is whether they publish a specification you can hold them to. For this model, the published catalog data covers overall dimensions of 3880 × 2200 × 1250 mm, one control system, one swim training system, one water pump, one filter pump, a jet total of 24, four LED lights and a total power figure of 8.05 kW.

Read those numbers as configuration, not as an industry standard. The same shell size appears across several variants in the range, and the equipment behind it changes: the Outdoor Swim Spa WS-115AⅢ-U lists four water pumps, 23 jets, one LED light and a total power figure of 11.85 kW, with no swim training system shown. Two units that look identical in a photo therefore draw different currents, need different electrical provisioning and support different usage. Ask the supplier to confirm the exact bill of materials for the model code you are ordering — not for "the 115 series".

What Each Line in the Specification Actually Means on Site

Specification lineWhy a buyer should care
Overall dimensions 3880 × 2200 × 1250 mmSets the footprint, the access route for delivery and the excavation or deck cut-out. Confirm it against your site drawings before production starts.
Swim training systemDetermines whether the unit is sold as a lap-swimming appliance or as a hydrotherapy spa. Not every variant in the same size class carries it.
Water pump and filter pump countsDrive the circulation rate, filtration duty and the maintenance access you need around the unit.
Jet totalDefines the massage layout. Ask for a jet map so spa seating positions match what your client was shown.
LED lightsIn-water lighting count affects ambience and the wiring runs inside the shell.
Total powerThe single figure your electrical engineer designs to. Never assume it from a model name; take it from the confirmed configuration.

Options and Accessories: Get Them Priced Before Production, Not After

Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Each one changes both the quotation and the site preparation. A heat pump and insulation package changes the electrical load and the running-cost profile your client will be quoted; sand filtration changes plant-room space; steps change the deck edge detail.

A supplier who is serious about project work will tell you which options are compatible with a given model code and which are not, and will put that in writing on the proforma. Availability and compatibility vary by model, so treat any answer of "everything fits everything" as a warning sign.

Five Supplier Questions Worth Asking Before You Commit

  • Configuration confirmation. Will the supplier restate the full equipment list — pumps, jets, lights, control system, swim system, total power — for the exact model code on the purchase order?
  • Electrical interface. What supply characteristics does the confirmed configuration require, and who signs off the connection: the supplier's engineer or your local contractor?
  • Site preparation division of responsibility. Who is responsible for the base, the cut-out, drainage and access — and at what stage in the programme?
  • Packaging and lifting. How is the shell packed, what is the shipping volume, and what lifting arrangement does delivery assume on site?
  • Commissioning and spares. Is start-up support included, and are wear items such as pumps, filters and lights available as identifiable spare parts later?

Why Swim Spas Are Easier to Buy Inside a Coordinated Package

On a villa or resort project the swim spa rarely sits alone. It shares an outdoor zone with outdoor furniture for villas and resorts, it is close to bathroom sanitary fixtures in the wet-service coordination, and its deck, cladding and ceiling finishes sit in the same specification package as the rest of the building. Buying the spa through a one-stop furniture and building materials supplier keeps those interfaces with one party: one set of drawings to reconcile, one delivery window, one point of contact for snags.

That coordination matters most where the spa is part of a wider fit-out. Our turnkey interior project solutions cover consultation, design and planning, production, logistics, installation and after-sales as one sequence, and the same team handles the swimming pools and swim spas line alongside furniture, wall panels, flooring, lighting and cabinetry.

Logistics and Handover Are Part of the Product

A swim spa is bulky, fragile in transit and useless until it is set, connected and commissioned. Our logistics scope covers freight forwarding by sea, air and rail, export paperwork, packaging and container loading, shipment tracking and door-to-door delivery. On arrival, the handover stage covers on-site installation, inspection and snags, plus spare-parts replacement and ongoing maintenance under our installation and after-sales support.

Import terms, duties, transit times, local electrical requirements and installation arrangements are settled project by project with your engineer and contractor. We do not present them as fixed guarantees.

A Short Procurement Checklist for This Model

Before the purchase order

  • Model code and full equipment list confirmed in writing, including whether a swim training system is included.
  • Total power figure for the confirmed configuration passed to the electrical engineer.
  • Dimensions checked against site drawings, with delivery access route agreed.
  • Options — sterilization, heat pump, insulation, filtration, steps — priced and marked compatible with the model code.
  • Responsibility split for base preparation, connection, commissioning and snags recorded in the contract.

Before shipment

  • Packing list, shipping volume and lifting plan confirmed with your site team.
  • Commissioning date and spare-parts contact agreed in advance.

Putting a Question to Us

If you are specifying this model for a villa, resort or residential development, send us the model code, your site drawing and the options you want. We will return a confirmed equipment list, the electrical figure for that configuration and a delivered price. You can reach our project team through the contact page, or browse the wider range at SANTERSON swimming pools and swim spas.