A corner cabinet with a glazed door is one of the easiest items in a kitchen package to mis-quote, because most of the cost sits in details that never appear on a line item. Two quotes for "1 glass front corner unit" can differ by a wide margin and still both be honest — they are simply describing different products. Before you sign off a cabinetry quotation, here is what needs to be spelled out in writing.

1. The corner geometry, not just the size

Corner units are where measurement errors concentrate. Ask the supplier to state which configuration they are quoting: an L Shaped Corner Cabinet that bridges two perpendicular runs, a U Shaped Corner Cabinet that carries three faces, or a blind corner solved with a Pull Out Corner Cabinet. Each one has different carcass dimensions, different door angles and very different hardware.

A serious quotation gives you the finished external dimensions, the wall-to-wall measurement it assumes, and a shop drawing showing which side returns into the wall. If the quote only says "900 × 900 corner unit", request the drawing before you compare prices.

2. The glass itself

"Glass front" covers a range of very different products. Confirm in writing:

  • Glass thickness and whether the glass is toughened — important for a door that will be opened daily in a family kitchen.
  • Finish: clear, frosted, bronze-tinted or fluted. Frosted glass hides dish clutter; clear glass does not.
  • How the glass is seated — a rebated frame with a gasket or glazing bead holds glass far more securely than a simple groove.
  • Framing material: an aluminium-framed glazed door behaves differently from a painted timber or MDF frame, especially near ovens and dishwashers where heat and steam are constant.

If you have seen a sample, ask for the quoted specification to be described using the same wording as that sample. Photographs of a showroom door are not a specification.

3. Carcass, back panel and edge banding

The visible door is only part of what you pay for. Check the board type and thickness for the carcass, whether the back panel is a thin hardboard or a thicker structural panel, and whether all visible edges are banded. A glazed corner unit is seen from two directions, so unfinished edges inside the display area will show. Also confirm the interior finish colour — it reads through the glass.

4. Interior fit-out and lighting

Corner space is wasted space unless it is fitted out. The quote should state what is inside: fixed shelves, adjustable shelves, a Lazy Susan Corner Cabinet rotation tray, pull-out baskets, or an Open Shelf Corner Cabinet arrangement. Specify shelf load rating if you intend to store heavy ceramics or glassware.

Glass display cabinets almost always need internal lighting. Confirm whether LED strips, wiring, transformer, switch and the channel cut into the carcass are included — or whether electricians are expected to run a feed. This single omission changes both the cabinet price and the site preparation.

5. Doors, hinges and opening clearance

Glass-front doors are heavier than solid ones. Ask for hinge brand and model, load rating, whether soft-close is included, and the number of hinges per door. Then check swing direction and clearance: a glazed corner door that fouls an adjacent handle, an appliance door or a walkway is a very expensive mistake to discover on site.

6. What the price actually covers

This is where comparable quotes stop being comparable. Put each line into a simple grid:

ItemQuestion to have answered in writing
Scope of supplyCarcass, doors, glass, hardware, plinth, scribe fillers — which are included?
Delivery termsPort, door-to-door, or kerbside? Who handles customs clearance and duties?
PackagingGlazed units need separate crating and glass protection. Ask how glass doors travel.
Lead timeFrom drawing sign-off, not from order date. State it as weeks.
Payment termsDeposit percentage, milestone for balance, what triggers each payment.
Breakages in transitWho replaces a cracked glass panel, and how quickly is a replacement shipped?
After-salesWarranty period and scope; availability of spare hinges, shelves and glass panels.

Where the cabinets are being shipped in from another country, packaging and replacement terms matter even more. A replacement glass panel shipped on its own can take longer than the original entire kitchen did.

7. Drawings, sign-off and change control

Production should not start until you have signed a dimensioned drawing that shows glass type, door swing, handle position, interior layout and lighting. Any change after that point has a cost, so the quotation should say how variations are priced. A supplier who will not issue shop drawings before production is a risk worth identifying early.

8. How to compare two quotes fairly

Rebuild both quotations on the same basis: identical carcass specification, identical glass specification, identical hardware, identical delivery terms. Only then does the price difference mean anything. If one quote is much cheaper, the saving is almost always in something you can see through — thinner glass, a lighter carcass, fewer hinges, no lighting, or unprotected packing.

Practical rule: every number on a cabinetry quotation should be traceable to a drawing, and every drawing dimension should be traceable to a site measurement taken after the walls, floor and ceiling finishes are complete. Measure last, order once.

Ordering cabinetry for a project?

SANTERSON manufactures Glass Front Corner Cabinets and wider kitchen ranges made to measure, with material and finish options specified per project. From design coordination and production through door-to-door delivery and installation support, the package is quoted as one scope so nothing falls between suppliers.

Send us your floor plan and required corner configuration for a written specification and quotation.