Interior doors are one of the last items a fit-out package delivers and one of the first things a client touches. That is why door specifications so often slip through project reviews: nobody wants to lock down a door schedule before the wall finishes, joinery and hardware are settled. When decorative interior doors come from the same supplier that is already producing your cabinetry, wall panelling and wardrobes, the coordination problem becomes much smaller. This article explains how made-to-measure decorative doors slot into a single procurement package for villas, hotels and offices, and what a buyer should confirm before the door schedule is signed off.

Why doors break away from a fit-out package

In most villa and hospitality projects, doors are treated as a separate trade. The joinery contractor builds the built-in units, a different supplier provides the door leaves and frames, and another delivers ironmongery. Three suppliers means three sets of shop drawings, three finish samples, and three delivery windows. The visible result is usually small but expensive: a veneer grain that does not match the adjacent panelling, a frame reveal that changes once the wall covering goes on, or a handle choice that clashes with wardrobe pulls already installed.

The Interior Doors collection is specified project by project rather than picked from a fixed size range. Finish, layout and dimensions are set for each opening, so a door can be ordered to match the veneer, lacquer or panel profile used elsewhere in the same building. For buyers consolidating several interior product groups with one manufacturer, this is where the commercial benefit appears: one drawing set, one finish board, one shipment.

Matching door styles to the rest of the interior package

The range covers several door families, and each one pairs naturally with a different part of an interior fit-out. Selecting by the surrounding work — not by the door alone — keeps the schedule coherent.

Door typeWhere it belongs in a packageWhat to coordinate at the same time
Decorative interior doorsGuest rooms, villas, reception and office corridors where the door reads as part of the wall designWall panel profile, veneer or lacquer sample, ironmongery finish
Decorative concealed doorsFeature walls and panelling runs where the opening should stay invisiblePanel layout drawing, plasterboard set-out, reveal tolerance
Modern slim frame French doorsStudy, dining and meeting-room openings that need daylight between roomsGlass specification, floor threshold detail, adjacent glazing
Flush sliding doorsCompact bathrooms, laundry and storage openings where a swing arc is unusableCassette or track zone, cabinetry clearance, skirting continuation
Integrated door and panellingSuites and executive floors where doors, panelling and storage form one continuous surfacePartition grid, hidden hinge selection, joinery interface detail

A door schedule built this way is easier to price too, because the buyer sees each opening against the finish package it belongs to instead of as an isolated line item.

What a single-supplier package actually covers

Doors rarely travel alone on a project. SANTERSON works as a one-stop furniture and building materials supplier, so the same order can carry the fixtures that sit around the openings:

  • Kitchen cabinetry, wardrobes and freestanding storage built to the same finish board as the doors
  • Wall panels, partitions and feature walls that concealed and integrated doors are set into
  • Bathroom vanities, ceramics and shower systems for wet areas adjacent to the door schedule
  • Lighting, rugs and loose furniture for the rooms those doors serve, including outdoor furniture for terraces and pool decks
  • Engineered wood flooring and ceiling or cladding finishes that meet the door frames at the floor and head

On a villa or hotel project, this matters most at interfaces. A floor-standing unit butting into a door frame, a skirting that has to stop cleanly at a reveal, a media wall that hides an opening — each of these is easier to resolve when one production team draws and builds both sides of the junction.

Confirming the door schedule before production starts

Product pages describe made-to-measure sizing with material and finish options, and they ask buyers to confirm dimensions and selected specifications for each project. Treat that as a real checkpoint rather than a formality. Before releasing a door order, a procurement team should have:

  • An opening schedule listing every door by room, with clear opening size, floor finish level and wall build-up thickness
  • One approved finish reference per surface — veneer species, lacquer sheen or panel profile — signed against a physical sample rather than a screen image
  • Ironmongery decisions made together with the wardrobe and cabinet pulls, so handle styles and finishes stay consistent across the building
  • A written note on which openings are concealed, sliding or hinged, since each needs different structural provision in the wall
  • Site dimensions taken after the wall and floor finishes are fixed, not from architectural drawings alone
Where a project requires local fire, acoustic or accessibility performance, that requirement has to be stated in the enquiry. Door configuration follows what you specify, so send the applicable standard with your opening schedule instead of assuming it is covered by the default build.

Production, delivery and installation as one sequence

The service path on this site runs through consultation, design and planning, production, logistics, installation and after-sales. For doors that means the schedule can be released in step with cabinetry and panelling rather than chasing them. Doors arrive in the same container as joinery and fixtures, under logistics and door-to-door delivery covering freight forwarding, customs documentation and container loading.

That single delivery window changes site sequencing. Frames can be set once the wall build-up is complete; leaves hang after painting and floor finishes; hardware goes on at handover cleaning. Fewer separate deliveries also means fewer snag lists: when a frame reveal needs adjustment, one team owns both the door and the adjoining panel.

Where a project needs non-standard sizes, bespoke finishes or OEM production, custom and custom and OEM service covers prototyping and material selection alongside the rest of the order. For Australian villa and hospitality work, published project references include renovated modern villas in Melbourne and Sydney and Platin Housing projects in Willoughby, Perth and North Turramurra — useful when checking whether a supplier has handled comparable interior scopes.

Building the enquiry

Send the opening schedule, the finish board reference and the interface drawings in one enquiry. That lets the supplier price doors together with the joinery, panelling and fixtures they meet, and return a coordinated proposal rather than a door quotation that has to be reworked after the first site meeting.

If your project needs decorative interior doors produced alongside cabinetry, wall panels and other interior fixtures, send your opening schedule and finish references to SANTERSON for a coordinated fit-out proposal. Contact: PHILLIP, +86-13928214007, santerson@qq.com.