Wall panelling is one of those line items that looks simple on a schedule and turns complicated on site. A sample arrives, the colour reads beautifully under studio light, and then it goes onto a villa hallway where three light sources, two door openings and a skirting return all compete with it. If you are specifying Santerson Matte Lacquer Panels for a residential project, the buying decision is rarely about the finish alone. It is about how well the panel system has been configured to your walls before anyone cuts anything.
What the product page actually offers
Santerson Matte Lacquer Panels sit inside the Paneling Systems collection and are described as configurable wall panels for residential projects. The listing is explicit about three things: finish, layout and dimensions can be specified to suit each space; sizing is made to measure; and material and finish options are selectable. What the page does not do is publish a fixed board size, a single substrate or a standard sheen value, because those are decided per project rather than off a shelf.
That framing matters when you compare quotations. Two suppliers can both quote "matte lacquer wall panels" and deliver very different assemblies — different core, different edge treatment, different number of field pieces, different allowance for reveals and switches. Treat the product page as the start of a specification conversation, not as a completed specification.
Read the specification before you read the price
A practical way to compare offers is to put every supplier's answer into the same handful of rows. If one column comes back vague, that is where your variation risk lives.
| Item to confirm | Why it changes cost and outcome |
|---|---|
| Panel size and joint layout | Made-to-measure sizing means the drawing, not the catalogue, sets the number of pieces, joint positions and waste. Fewer, wider panels read cleaner on a long wall but are harder to manoeuvre through corridors and lifts. |
| Substrate and core | The carrier determines fixing method, edge detail and how the panel behaves around openings. It should be stated in writing for the configuration you are buying. |
| Lacquer build and sheen | "Matte" covers a wide band of reflectance. Ask for the physical sample with the same lacquer build that will be produced, not a generic swatch card. |
| Edge, trim and transition details | Inside corners, external corners, skirting junctions and reveals are where cost and time hide. Decide whether trims are metal, matching lacquer or shadow gaps before ordering. |
| Fixing method and substrate preparation | Adhesive, mechanical cleats or a batten system each demand different wall flatness. A flatness problem found after delivery becomes site labour. |
| Scope of supply versus scope of installation | Clarify whether the quotation covers panels only, or also trims, fixings, spare pieces, packing and on-site guidance. |
Five checks worth doing before you sign
- 01Get a sample in the actual space. View the finish at three times of day, with the lighting design that will be installed. Matte lacquer reads differently under warm downlights than under daylight from a tall window, and a sample on a desk tells you almost nothing about glare.
- 02Ask for a setting-out drawing. A dimensioned elevation showing joint positions, panel widths and trim lines is the single best predictor of a tidy install. If nobody draws it, you are buying an assumption.
- 03Walk the wall flatness question early. Agree who prepares the substrate and to what tolerance. This is the most common source of delay on panel projects and costs almost nothing to resolve at quotation stage.
- 04Check how the panels meet doors, architraves and skirting. Where a wall also carries Integrated Door & Paneling, the reveal detail has to be resolved as one assembly. Ordering doors and panelling from different minds usually produces a visible mismatch.
- 05Order spares with the first order. A small quantity of spare panels and matching trim bought at the same time protects you against site damage and future repair, since later batches can vary.
How it sits alongside the other Paneling Systems options
The same collection includes Santerson Textured Panels, Santerson Glass & Glossy Panels, Santerson Stone & Marble Panels and Wood Veneer Panels, all described with the same made-to-measure configuration logic. The practical difference between them is how each surface behaves in a room, not how it looks on a mood board.
Matte lacquer tends to be the quiet choice: a soft, even surface that suits headboards, media walls, study joinery and corridor runs, and that does not throw reflections back across a room. Glossy and glass panels do the opposite, which is why they work well as accents and poorly across a whole wall under strong light. Textured surfaces hide handling marks and small imperfections better than a flat matte field. Stone and marble panels bring weight and joint patterns that need to be coordinated with flooring. Where panelling continues into bathrooms or wet-adjacent zones, look at Wall Panel Systems as a separate specification and confirm the suitability of the chosen configuration for that environment.
If you want the wider picture before locking a finish, the Wall Panels and Wall Cladding category groups the alternatives in one place.
Where custom manufacturing changes the buying decision
Because these panels are configured rather than stocked, the supplier's workshop capability is part of what you are paying for. Alongside its panel ranges, Santerson lists Custom Furniture Design and Prototyping, which means a project can develop panelling, joinery and loose pieces against one drawing set. For buyers, the benefit is not convenience for its own sake — it is that a single production owner resolves conflicts between wardrobe carcasses, door reveals and wall panels before they reach site.
For larger fit-outs, that coordination extends through Turnkey Interior Project Solutions, covering design consultation, material selection, production and quality control, project management, site coordination and handover. The honest test to apply: ask whether the same team holds the panel drawing and the joinery drawing. If yes, expect fewer on-site surprises.
Delivery, packing and the last 10 metres
Made-to-measure panels are a freight problem as much as a finish decision. Long, flat, finished surfaces are the items most likely to arrive damaged, so ask how edges are protected, how panels are packed in a container and whether the packing list matches the setting-out drawing room by room. Santerson describes global freight forwarding by sea, air and rail with customs paperwork and door-to-door delivery under Furniture Logistics and Door-to-door Delivery, while on-site fitting, inspection and snags sit under Furniture Installation for Interior Projects.
Confirm the delivery terms, duties and delivery extent for your specific destination in writing. Import arrangements vary by country and by project, and a landed price that excludes the last leg to the apartment door is not a landed price.
A short decision checklist
- Sample: physical panel with the production lacquer build, viewed in the finished room.
- Drawing: dimensioned elevations with joint positions and trim details approved before order.
- Written spec: substrate, core, panel thickness, sheen band and edge treatment stated for the configuration you are buying.
- Interfaces: doors, skirting, reveals, switch plates and lighting resolved on the drawing.
- Logistics: packing method, container loading plan, delivery terms and extent confirmed per project.
- Spares: spare panels and matching trim ordered with the main consignment.
Questions about a specific wall, layout or finish can go to Contact Us. Send the room elevation and the lighting plan with your enquiry, and ask for the specification of the exact configuration you are considering rather than a general brochure.