A U shaped corner cabinet is one of the smallest line items in a kitchen package and one of the most expensive to correct late. It sits between two runs of cabinetry, carries hardware that has to swing or slide through a fixed opening, and its finish has to match doors produced in another batch. When a purchase order simply reads "U shaped corner cabinet, 1 set", every one of those variables is still open at the point of manufacture. Procurement teams who lock the variables down in writing before production starts are the ones who avoid site rework.

The list below is what a complete documentation pack looks like for this product family, based on how custom and OEM cabinetry is specified through our design and production coordination process.

1. The geometry, not just the plan view

Our U Shaped Corner Cabinets are made to measure, with layout and dimensions specified per project. That flexibility only works if the drawing set carries the numbers a factory needs. Document the overall envelope of each corner unit, the two adjacent run lengths that meet it, the finished floor level reference, and the depth of both base and wall units at the corner. Record where the corner falls relative to walls that are not square — older villas and renovated hotel rooms rarely measure at exactly 90 degrees, and a nominal right-angle drawing against an out-of-square wall produces a visible scribe line on site.

Also record clearances: appliance positions, waste and water pipework, switch plates, and any structural column that the corner run must pass. Anything drawn as "site to verify" will be verified twice — once in the factory, once at handover.

2. The access mechanism and what it carries

Corner units are defined by how their interior is reached. Within our corner kitchen cabinetry range you will find pull out corner cabinets, which bring the rear contents forward on runners, and lazy Susan corner cabinets, which rotate shelves inside the opening. Specify which one each unit uses, because the carcass dimensions, the required side clearance and the load rating differ.

Write down the intended load: light dry goods, small appliances, or heavy pots. A mechanism rated for one duty and loaded for another sags in the first year of a busy kitchen. Note the door type as well — hinged bi-fold, single hinged, or drawer-fronted — since that determines the reveal needed between doors and the hinge specification.

3. Materials and finish, stated by reference

Colour names do not survive shipping. Specify the door material family and the surface treatment using a sample reference both sides hold: our kitchen cabinetry is offered across acrylic, lacquer, melamine, PVC, wood veneer and aluminium frame constructions, in matte, high gloss, textured and two-tone surfaces. A purchase line that reads "matte grey" invites variation; one that reads "matte lacquer, sample reference confirmed on approved physical sample dated ..." does not.

Document the carcass separately from the doors. Interior colour, edge banding thickness and material, back panel thickness and fixing method, and whether the corner unit shares a carcass with its neighbour or stands as an independent module are all items that change price and change appearance when cut open on site.

4. Hardware schedule

List every moving part by brand, series and quantity: runners, rotary mechanisms, hinges with their closing action, handles or the handleless profile detail, and any integrated lighting. Our range includes integrated cabinet lighting, which means the corner unit also needs a driver location, a cable route and a switching point recorded on the electrical drawing. Hardware that is decided after the carcass is cut becomes a drilling problem.

5. Interface details with worktops and appliances

State who supplies the worktop over the corner run, the worktop thickness, the edge detail, and the upstand or splashback arrangement at both walls. Record the height of the corner unit relative to the finished floor so the worktop fabricator and the cabinet producer are working from the same datum. If an appliance is tucked into the corner — a dishwasher, a wine cooler, a built-in oven — note its model, its ventilation requirement, and who supplies the trim kit.

6. Approval and production records

Keep one file per project containing: the signed shop drawing with dimensions, the approved finish samples with dates, the hardware schedule, the packing list showing which carton holds which unit, and the change log for anything revised after the first issue. Our cooperation steps run from project brief and design proposal to quotation and detail confirmation, then production, shipment and follow-up — the documentation above is what makes the "detail confirmation" step meaningful rather than a formality.

For multi-unit developments, add a unit-type code to every corner unit label. A hotel or apartment tower with three repeating kitchen types will otherwise mix corner modules between floors during installation.

7. Delivery, sequence and site conditions

Record the delivery window, the receiving party, and whether units arrive assembled or flat-packed, since that changes both the access route needed on site and the labour required to install. Corner units are wide; confirm that lifts, stairwells and doorways on the installation floor can take them. Note storage conditions too — cabinetry stacked in a wet, unsealed room before fitting is a snag no drawing can fix.

Before you place the order

If you are specifying corner kitchen cabinetry for a villa, apartment or hospitality fit-out, send us the plan view together with the appliance schedule and the finish direction you want to match. Our team works from your drawings through production coordination and on-site guidance, so the dimension set, hardware list and finish references above can be confirmed with you before cutting starts. Contact SANTERSON (PHILLIP) at santerson@qq.com or +86-13928214007 to start that review.