A washdown one piece toilet rarely decides a project on its own, but it is one of the fixtures that exposes weak coordination fastest. The bowl shape has to match the basin, the seat and the tapware; the trap has to match what the plumbing contractor has actually set out; and the same model has to survive housekeeping cycles in a guest bathroom and weekend use in a private villa. This article uses our Washdown One Piece Toilet, Modern Ceramic 1003A Toilet for Bathroom as the worked example and shows how to write it into a procurement brief so that sampling, ordering and site installation stay aligned.

What belongs in the schedule line

Bathroom schedules fail when they record only a product name. For a WC, the line needs enough information for three different readers: the designer checking appearance, the plumber checking drainage, and the buyer checking quantity and lead time. We suggest six fields per fixture:

  • Model reference and full product title, copied exactly as it appears on the datasheet.
  • Fixture type and construction, for example one-piece washdown or two-piece washdown.
  • Drainage type and rough-in dimension, stated per room rather than once for the whole building.
  • Surface and colour, plus the glaze description used on the product page.
  • Room-by-room quantity, with guest bathrooms listed separately from main and ensuite bathrooms.
  • Accessories to be quoted at the same time: seat, fixings, connectors and any matching bidet.

The 1003A is described as a vitreous ceramic one-piece toilet with a glossy glaze and a seamless junction between tank and bowl. That construction detail matters operationally: the crevice behind a two-piece tank is where housekeeping effort goes, so on a hospitality schedule it is worth stating explicitly which construction type each room receives.

Trap type and rough-in come before appearance

The single most common sanitary-ware change order we see is a trap mismatch. The 1003A is offered with two drainage arrangements: a P-trap wall drain with an 180mm rough-in, and an S-trap floor drain with a 250mm rough-in. Both are standard configurations, but they are not interchangeable after the waste pipework is set out.

Write the trap decision into the drawings at first-fix stage, room by room. A wall outlet and a floor outlet change the stud cavity, the boxing, sometimes the vanity position, and in renovated buildings they can change whether the wall needs to be opened at all. If a project mixes both arrangements — which is normal when an existing wing is being upgraded alongside new work — list them as two separate schedule lines with their own quantities, not one line with a note.

Confirm the finished floor level before you lock the rough-in. A tiled screed can shift a dimension by enough to turn a workable setting-out into an awkward one on site.

Matching the rest of the bathroom

Ceramics look wrong when bowl radius, glaze sheen and seat profile drift between fixtures in the same room. Where a series exists, specify the whole suite from it rather than mixing families across rooms. The 1051 washdown one piece toilet, for instance, sits within a wider family that also covers wall-hung WCs and basins, which is how a specifier keeps guest bathrooms and ensuites visually consistent without re-proving the design each time.

Decide at the same stage whether the project needs a matching bidet, and whether vanities, mirror cabinets and tall storage in the same rooms are coming from the same supplier. Our Bathroom Sanitary Fixtures range covers WCs, basins, bidets and the associated bathroom storage and mirror units, which keeps glaze colour and hardware finish on one order instead of three.

Documentation to request with the quotation

Ask for the same document set on every sanitary enquiry, and refuse to price against a brochure image. For each model we provide:

  • Dimensioned technical drawing with overall size, rough-in and outlet position.
  • The compliance marking stated on the current product page — the 1003A is listed as CE certified — together with any additional documentation your local authority or certifier asks for.
  • Seat specification and the seat-to-bowl interface, since seats are consumables in hospitality use.
  • Fixing method and whether concealed or exposed fixings apply to that model.
  • Packing unit and carton dimensions, which drive container loading and storage on site.

Product pages are marketing documents; treat the technical sheet as the contractual reference. If a figure on the page and a figure on the sheet disagree, resolve it in writing before the order is placed.

Sampling and approval

Order one sample per WC type, not one for the whole building. Photograph the sample against the selected basin, seat, tapware and wall finish under the actual bathroom lighting. This is where glaze sheen differences show up — a high-gloss bowl next to a satin-finish vanity can read as a mismatch even when both were specified as white.

Then run a dry fit with the sample on a mock-up waste set-out at the stated rough-in. It takes an hour and it removes most of the arguments that would otherwise happen in occupied bathrooms.

Ordering, delivery and installation sequence

Sanitary ware is bulky, fragile and usually stored badly on site, so order it against an installation programme rather than a single project date. Split quantities by floor or wing, and keep the last tranche until wet trades have finished in those areas.

Through our Logistics and Door-to-door Delivery service we arrange sea, air and rail freight, packaging and container loading, customs paperwork and shipment tracking to the delivery address. Confirm Incoterms, duties and the exact delivery point for your site rather than assuming a port-to-port handover.

At handover, our Installation and After-sales Support covers fitting, inspection with a snag list, spare parts and replacement. On WC installations the snag list should record flush performance test per cistern, seal integrity at the trap connection, and seat alignment — three checks that take minutes each and prevent callbacks.

Keeping spares realistic

A hotel or a multi-unit residential development will replace seats, seals and connectors long after the original order closes. Order a spare percentage with the main quantity, and record model numbers in the asset register rather than photographs of them. When a fixture is part of a family that stays in the range — as the washdown one piece models do — later refurbishment can reuse the same specification instead of forcing an awkward match.

A short checklist

  • Trap type and rough-in confirmed per room, against finished floor levels.
  • Construction type stated: one-piece seamless or two-piece.
  • Suite family fixed across basins, WCs, bidets and storage.
  • Technical sheet, not the product page, used as the contractual reference.
  • One sample per WC type, dry-fitted at the stated rough-in.
  • Delivery split by installation phase; spares and seats ordered with the main quantity.

If you are assembling a sanitary package for a villa, hotel or multi-unit project, send us the room schedule and the drainage set-out and we will price the WCs, basins and matching accessories against it as one specification. Start from the 1003A product page or the bathroom sanitary fixtures range, and we will return a dimensioned schedule you can issue to your plumbing contractor.