A wooden sliding door wardrobe is one of the easier storage decisions to get wrong. It saves floor space in a bedroom, villa or hotel room, but it also hides a set of mechanical and dimensional choices that only become obvious once the doors start sticking or the interior layout no longer fits your clothes. If you are specifying built-in wardrobes for a project, the questions below are the ones worth putting to your supplier before anything goes into production.

1. Does the room actually suit a sliding configuration?

Sliding doors travel parallel to the opening, so they need no swing clearance — that is the whole reason people choose them for narrow bedrooms, hotel rooms and corridors. What they do need is depth in the plane of the wardrobe to carry the track and the overlapping panels, plus a genuinely plumb wall and a level floor or ceiling fixing. Ask your supplier how much build-up the door system adds to your stated opening size, and whether the unit is fixed to the floor, to the ceiling, or between studs.

Where the wall is out of square, ask what tolerance the manufacturer will take up on site and what they need from your builder beforehand. A made-to-measure unit only pays off if the measured opening is accurate, so agree who is responsible for taking those dimensions.

2. How many panels, and where do they stack?

A two-panel unit on a single track always leaves half the opening blocked. Three or four panels on twin tracks let you open more of the interior at once, but the panels then stack against one side and need clear space to do it. Before you order, mark on the plan where the stack will sit and check that nothing — a bed, a door, a light switch — sits in front of it.

Ask for the panel layout as a drawing rather than a description. Our Wooden Sliding Door Wardrobes are made to measure, so panel count, track arrangement and the layout inside the carcass are all set per project rather than picked from a fixed size list.

3. What is the door face actually made of?

"Wooden" covers several different constructions, and they behave differently. Ask for the substrate, the surface material and the edge treatment in writing. A wood-veneer or lacquered face reads warm in a villa bedroom; a matte or textured melamine face is easier to live with where fingerprints and daily handling are the issue; a two-tone combination is often used to tie the wardrobe into nearby cabinetry.

Edge banding and the finish on the reverse of the panel matter more than most buyers expect — these are the surfaces that show first when doors rub or get wiped down. If the project sits in a coastal or humid environment, say so at the enquiry stage and ask which finishes the factory recommends for that condition.

4. Which hardware, and can you get replacements later?

The doors are only as good as the track, rollers, buffers and bottom guides. Ask which hardware brand or series is fitted, what load rating it carries for your panel size, and — importantly — whether the same parts will still be available in a few years. For a hotel or apartment block with dozens of identical units, spare-part availability decides whether a fault is a five-minute fix or a replacement door.

Also ask how the door is adjusted. Height-adjustable rollers and removable bottom guides make on-site levelling possible after the building has settled; fixed systems do not.

5. What goes inside, and in what proportions?

Sliding doors keep the interior easy to reach but easy to waste. Before ordering, list what you actually store: long hanging for coats and dresses, double hanging for shirts, drawers for folded items, shelving for linen, a shelf above the doors for cases. Then have the supplier draw it at scale.

Where the bedroom turns a corner or meets an awkward ceiling height, a standard straight run will not serve you — our Sliding Door Corner Wardrobes exist for exactly that situation. If you want the wardrobe to disappear into a scheme rather than read as furniture, Matte Sliding Door Wardrobes are the quieter option against a painted wall.

6. Who measures, who delivers, and who installs?

For a single wardrobe bought locally this is one conversation. For wardrobes ordered across borders as part of a villa or hospitality fit-out it becomes several: shipping packaging that protects large panels, container loading shared with other joinery, storage on site until the room is finished, and an installation crew who understand track alignment.

Ask your supplier where their responsibility ends. As a one-stop furniture and building materials supplier, SANTERSON handles design coordination, made-to-measure production, door-to-door logistics and installation support within one project scope — which means the wardrobe specification does not have to be re-explained to three different vendors.

Before you sign the order

Get three things in writing: a dimensioned elevation of the finished unit with panel split marked, an interior layout drawing showing hanging heights and drawer positions, and a hardware schedule naming the track, rollers and their adjustment method. If a supplier cannot produce all three, you are buying a guess.

Questions worth sending with your enquiry

  • What is the finished external dimension once the door system is included, for my opening of X by Y?
  • Which substrate, surface material and edge treatment are you quoting, on both faces?
  • What is the maximum panel width and weight your track supports?
  • Is the top track ceiling-fixed, wall-fixed or carcass-mounted?
  • Which hardware parts are stocked as spares, and how are they ordered?
  • What site preparation do you need completed before installation day?

Send your opening dimensions, a photo of the room and a short list of what needs to hang, and a competent manufacturer will come back with a drawing rather than a price. That drawing is what you check all of the answers above against.

Talk to us about your wardrobe project

SANTERSON manufactures made-to-measure wardrobes, cabinetry and interior fixtures for villa, hotel and apartment projects, with production, logistics and installation coordinated under one scope. Send your drawings or room dimensions and we will return a dimensioned proposal.