Floating shelves are one of the smallest line items in a commercial fit-out and one of the easiest to get wrong. A shelf that looks right on a sample board can fail on site when it is fixed to a partition instead of a structural wall, when its finish does not match the joinery delivered by another supplier, or when the load it has to carry turns out to be heavier than the specification assumed. For hotels, serviced apartments, villas and offices, the practical question is not which supplier shows the prettiest photograph, but which supplier can document the fixing method, the material, the finish and the tolerance well enough for your site team to install without improvising.

The comparison below sets out the questions a procurement or project manager should put to every floating shelf supplier before a purchase order is raised, using the way our own Open Shelving range is specified as a working example.

Ask how the shelves are engineered to the wall, not just to the bracket

Hidden brackets and French-cleat systems both look seamless once installed, but they behave differently on site. A supplier who answers this question seriously will tell you which bracket system they use, what substrate it assumes (solid masonry, timber stud, metal stud with ply backing, or a built-in steel frame), and what fixing pattern the installer should follow. If a supplier cannot describe the substrate assumption at quotation stage, the wall build-up becomes your risk.

Our floating shelves are supplied as made-to-measure pieces with layout and dimensions confirmed for each project, so the fixing detail is agreed against the project drawings rather than selected from a fixed catalogue size. In a commercial fit-out that difference is visible at handover: shelf depth can follow the niche or head height on site instead of the design being trimmed to fit an off-the-shelf module.

Check whether sizing is genuinely made-to-measure

Some suppliers describe a range as customisable when they really offer a handful of standard widths. Ask directly: can length, depth and shelf spacing each be set independently, and at what span does the supplier call for additional support? A supplier who lists sizing, material options and finish options as separate decisions is usually running real production flexibility; a supplier whose only variable is colour is closer to standard stock.

Where a project needs shelving that runs across a whole wall — a reception library, a guest-suite dressing area or a staff resource room — compare modular wall systems alongside single boards. Our floating modular shelves are configured as wall systems with layout and finish specified per space, which keeps the reveal lines consistent where several runs meet.

Match material and finish to the room the shelves are going into

Shelves in a spa or pool bathroom face splash, humidity and cleaning chemicals; shelves in a lobby face public handling; shelves in a guest room face very little at all. Ask what board substrate is used, what the surface treatment is, and how the edge is finished — an unsealed edge is where a laminate board fails first in a wet area. For metal-framed units, ask about the coating as well as the frame build.

This is why we specify bathroom shelving as its own configuration set rather than one generic item: metal frame shelves, glass shelves and wall-hung open shelving each carry their own material, finish and fixing details, so a specification can be reviewed against the room it is destined for.

Put the intended use in writing before you order

Shelving causes problems most often because nobody stated what it has to hold. Before requesting a quotation, write down the intended use: linen and towels, hardcover reference books, glass amenity bottles, display objects with fixed weights, or small equipment. Give that duty to the supplier and ask them to confirm board thickness, bracket type and fixing pattern for it. A supplier who engages with a stated load is doing specification work; one who quotes the same configuration regardless of use is selling boards.

For glass shelving, request the glass specification, the permitted load and the support detail together — those three items belong in one document, not scattered across separate emails.

Compare finish consistency across the whole fit-out

In a project, floating shelves rarely stand alone. They sit beside wardrobes, vanities, media walls and panelling supplied by other trades, and a colour or grain mismatch is obvious the day the site is handed over. Ask suppliers for physical finish samples carrying the same batch reference as the production run, and check their veneer, lacquer, melamine and laminate options against the joinery package they are also quoting. A supplier who can produce shelving and the surrounding cabinetry to one specification removes an entire category of site dispute.

Our wall mounted shelves go through the same finish and layout process as our built-in cabinetry, which is how a shelving run in a villa living room or an office lounge can be matched to the panelling and media unit beside it.

Judge the supplier by their documentation, not their brochure

Before committing, order one sample or mock-up unit and assess the paperwork that arrives with it. A dependable commercial supplier sends dimensioned shop drawings for approval, a clear material and finish callout, fixing instructions for the installer, and packing marks that tie each crate to a room or floor. Where the project also involves international freight, ask who prepares the commercial invoice and packing list, how crates are protected for transit, and what happens if a piece arrives damaged.

We handle that as part of one workflow covering design coordination, production and door-to-door delivery, with installation support and after-sales follow-up arranged through a single project contact rather than several separate vendors.

Confirm who answers questions after handover

Ask each supplier what happens when a bracket needs replacing, a shelf is damaged during cleaning, or an additional run is required in a later phase. Get the answer in writing: who supplies spare parts, on what terms, and for how long. Suppliers running their own production can usually re-make a single piece to the original specification; traders reselling stock often cannot once a line is discontinued.

A shortlist of questions to put to every supplier

  • Which bracket system do you use, and what wall substrate does it assume?
  • Can length, depth and shelf spacing be set independently, and at what span is extra support required?
  • What board substrate, surface treatment and edge sealing apply in wet areas?
  • For the duty I have stated, what board thickness and fixing pattern do you specify?
  • Can you send finish samples matched to the joinery package batch reference?
  • Do shop drawings come to me for approval before production starts?
  • How is each unit packed, marked and documented for freight?
  • What spare-part and replacement terms apply after handover?

Run that list against every quotation and the differences between suppliers show up quickly: similar photographs, very different levels of responsibility. If you are specifying shelving as part of a wider furniture and building-materials package for a hotel, villa or office project, send us the drawings together with the intended use of each run, and we will return dimensioned proposals with material, finish and fixing details for your review.